* common: delete StringToAddress, StringToHash
These functions are confusing because they don't parse hex, but use the
bytes of the string. This change removes them, replacing all uses of
StringToAddress(s) by BytesToAddress([]byte(s)).
* eth/filters: remove incorrect use of common.BytesToAddress
The diagnostic tool was saving the unencrypted version of the messages, which is an obvious
security flaw. As of this commit:
* encrypted messages saved instead of plain text.
* all messages are stored, even that created by the user of wnode.
In this PR, we fixed https://github.com/jpmorganchase/quorum/issues/289.
The root cause is we change the block header timestamp in Seal(). It will cause different root hash in proposer and validators' side.
We did the following updates:
1. remove `BlockPauseTime`
2. set block header timestamp in Prepare()
This is in preparation for the switch to libp2p: the ID generated
will be from a private key created with the help of libp2p's crypto
library, while Whisper will still use Go's default crypto libraries
for encrypting its messages. This change removes a conflict.
It shouldn't have any impact as the person receiving emails is
the user, not the node.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
The bulk of the issue was to adapt to the new requirement
that a v6 filter has to either contain a symmertric key or
an asymmetric one.
This commits revert one of the fixes that I made to remove
a linter warning: unexporting NewSentMessage. This is not
really a problem as I have a cleanup in the pipe that will
solve this issue.
* whisper: fixes warnings from the code linter
* whisper: more non-API-breaking changes
The remaining lint errors are because of auto-generated
files and one is because an exported function has a non-
exported return type. Changing this would break the API,
and will be part of another commit for easier reversal.
* whisper: un-export NewSentMessage to please the linter
This is an API change, which is why it's in its own commit.
This change was initiated after the linter complained that
the returned type wasn't exported. I chose to un-export
the function instead of exporting the type, because that
type is an implementation detail that I would like to
change in the near future to make the code more
readable and with an increased coverage.
* whisper: update gencodec output after upgrading it to new lint standards
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
This commit:
- Adds a --msgfile option to read the message to sign from a file
instead of command line argument.
- Adds a unit test for signing subcommands.
- Removes some weird whitespace in the code.
* dashboard: footer, deep state update
* dashboard: resolve asset path
* dashboard: remove bundle.js
* dashboard: prevent state update on every reconnection
* dashboard: fix linter issue
* dashboard, cmd: minor UI fix, include commit hash
* remove geth binary
* dashboard: gitCommit renamed to commit
* dashboard: move the geth version to the right, make commit optional
* dashboard: commit limited to 7 characters
* dashboard: limit commit length on client side
* dashboard: run go generate
* common/fdlimit: Move fdlimit files to separate package
When go-ethereum is used as a library the calling program need to set
the FD limit.
This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.
* common/fdlimit: Remove FdLimit from functions signature
* common/fdlimit: Rename fdlimit functions
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
* cmd/utils: Add check on hard limit, skip test if below target
* cmd/utils: Cross platform compatible fd limit test
* cmd/utils: Remove syscall.Rlimit in test
* cmd/utils: comment fd utility method
ethkey is a new tool that serves as a command line interface to
the basic key management functionalities of geth. It currently
supports:
- generating keyfiles
- inspecting keyfiles (print public and private key)
- signing messages
- verifying signed messages
Specifying ENS API CLI flag, env variable or configuration
field is required for ENS resolving. Backward compatibility is
preserved with --ens-api="" CLI flag value.
Merge with changes that implement config file PR #15548.
Field *EnsApi string* in swarm/api.Config is replaced with
*EnsAPIs []string*.
A new field *EnsDisabled bool* is added to swarm/api.Config for
easy way to disable ENS resolving with config file.
Signature of function swarm.NewSwarm is changed and simplified.
This commit adds a TOML configuration option to swarm. It reuses
the TOML configuration structure used in geth with swarm
customized items.
The commit:
* Adds a "dumpconfig" command to the swarm executable which
allows printing the (default) configuration to stdout, which
then can be redirected to a file in order to customize it.
* Adds a "--config <file>" option to the swarm executable which will
allow to load a configuration file in TOML format from the
specified location in order to initialize the Swarm node The
override priorities are like follows: environment variables
override command line arguments override config file override
default config.
Allow multiple --ens-api flags to be specified with value format
[tld:][contract-addr@]url.
Backward compatibility with only one --ens-api flag and --ens-addr
flag is preserved and conflict cases are handled:
- multiple --ens-api with --ens-addr returns an error
- single --ens-api with contract address and --ens-addr with
different contract address returns an error
Previously implemented --ens-endpoint is removed. Its functionality
is replaced with multiple --ens-api flags.
* cmd, consensus, eth: split ethash related config to it own
* eth, consensus: minor polish
* eth, consenus, console: compress pow testing config field to single one
* consensus, eth: document pow mode
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
* cmd/evm: adds ability to run individual state test file
* cmd/evm: Fix statetest runner to be more json friendly
* cmd/evm, tests: minor polishes, dump state on fail
Previously, NewManifest was asynchronous so subsequent code which tried
to use the returned manifest could error as the manifest was not yet
persisted.
This patch updates the Address type in common/types.go so that the Hex
function provides an EIP55-compliant output string. The implementation is pretty lightweight;
on my laptop the benchmark gives 1100ns/op, with the majority of that value due to the Keccak hash.
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
The previous attempt to use --ethapi as a fallback if --ens-api is not
set does not work because --ens-api has a default value, and also
setting --ens-api to "" is the suggested way to disable ENS lookups.
Signed-off-by: Lewis Marshall <lewis@lmars.net>
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.
Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
The error returned by client.Upload was previously being ignored due to becoming
out of scope outside the if statement. This has been fixed by instead defining a
function which returns the hash and error (rather than trying to set the hash in
each branch of the if statement).
* Move raft checkpoint logging to logger package.
This allows us to use it everywhere and turn it on / off from command
flags.
* Return an error when the pending block is requested in Raft mode.
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
This PR deprecates the file related RPC calls in favour of an improved HTTP API.
The main aim is to expose a simple to use API which can be consumed by thin
clients (e.g. curl and HTML forms) without the need for complex logic (e.g.
manipulating prefix trie manifests).
This adds a swarm ls command which lists files and directories stored in a
manifest. Rather than listing all files, it uses "directory prefixes" in case there are a
lot of files in a manifest but you just want to traverse it.
This also includes some refactoring to the tests and the introduction of a
swarm/api/client package to make things easier to test.
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
This commit solves several issues concerning the genesis block:
* Genesis/ChainConfig loading was handled by cmd/geth code. This left
library users in the cold. They could specify a JSON-encoded
string and overwrite the config, but didn't get any of the additional
checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
WriteGenesisBlock. This made it a lot harder to embed the genesis
block into the forthcoming config file loader. This commit changes
things so there is a single Genesis type that represents genesis
blocks. All uses of Write*Genesis* are changed to use the new type
instead.
* If the chain config supplied by the user was incompatible with the
current chain (i.e. the chain had already advanced beyond a scheduled
fork), it got overwritten. This is not an issue in practice because
previous forks have always had the highest total difficulty. It might
matter in the future though. The new code reverts the local chain to
the point of the fork when upgrading configuration.
The change to genesis block data removes compression library
dependencies from package core.