This change extends the peer metrics collection:
- traces the life-cycle of the peers
- meters the peer traffic separately for every peer
- creates event feed for the peer events
- emits the peer events
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.
There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
These RPC calls are analogous to Parity's parity_addReservedPeer and
parity_removeReservedPeer.
They are useful for adjusting the trusted peer set during runtime,
without requiring restarting the server.
This commit adds all changes needed for the merge of swarm-network-rewrite.
The changes:
- build: increase linter timeout
- contracts/ens: export ensNode
- log: add Output method and enable fractional seconds in format
- metrics: relax test timeout
- p2p: reduced some log levels, updates to simulation packages
- rpc: increased maxClientSubscriptionBuffer to 20000
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
p2p/simulations: introduce dialBan
- Refactor simulations/network connection getters to support
avoiding simultaneous dials between two peers If two peers dial
simultaneously, the connection will be dropped to help avoid
that, we essentially lock the connection object with a
timestamp which serves as a ban on dialing for a period of time
(dialBanTimeout).
- The connection getter InitConn can be wrapped and passed to the
nodes via adapters.NodeConfig#Reachable field and then used by
the respective services when they initiate connections. This
massively stablise the emerging connectivity when running with
hundreds of nodes bootstrapping a network.
p2p: add Inbound public method to p2p.Peer
p2p/simulations: Add server id to logs to support debugging
in-memory network simulations when multiple peers are logging.
p2p: SetupConn now returns error. The dialer checks the error and
only calls resolve if the actual TCP dial fails.
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
The p2p packages can now be configured to restrict all communication to
a certain subset of IP networks. This feature is meant to be used for
private networks.
Sai V
Zhou Zhiyao
Trung Nguyen
amalraj.manigmail.com
Corey Lin
Kurkó Mihály
Felix Lange
Wenbiao Zheng
Felföldi Zsolt
Janoš Guljaš
Peter Fox
Qvintvs
Andrey Petrov
Elad
Ivan Daniluk
Martin Holst Swende
Lewis Marshall
Joel Burget
Patrick Mylund Nielsen
Péter Szilágyi
Felix Lange
Sudhir Upadhyay
Firescar96
Jeffrey Wilcke