Commit Graph

120 Commits

Author SHA1 Message Date
Wenbiao Zheng d6ed2f67a8 eth, node, trie: fix minor typos (#16802) 2018-05-24 15:55:20 +03:00
Péter Szilágyi 54294b45b1
Merge pull request #16803 from karalabe/trie-avoid-funccall
trie: cleaner logic, one less func call
2018-05-24 15:54:00 +03:00
Péter Szilágyi d31802312a
trie: cleaner logic, one less func call 2018-05-24 13:46:45 +03:00
Péter Szilágyi c934c06cc1
trie: support proof generation from the iterator 2018-05-23 13:02:20 +03:00
kiel barry 0fe47e98c4 trie: fixes to comply with golint (#16771) 2018-05-21 23:41:31 +03:00
gary rong 7beccb29be all: get rid of error when creating memory database (#16716)
* all: get rid of error when create mdb

* core: clean up variables definition

* all: inline mdb definition
2018-05-09 15:24:25 +03:00
Eli 4a8d5d2b1e trie: golint iterator fixes (#16639) 2018-05-02 11:24:34 +03:00
xincaosu cfe8f5fd94 trie: remove unused `buf` parameter (#16583) 2018-04-27 12:45:02 +03:00
gary rong 1100e8ba63 eth/downloader: flush state sync data before exit (#16280) 2018-04-09 14:46:27 +02:00
Anton Evangelatov ae9f97221a metrics: pull library and introduce ResettingTimer and InfluxDB reporter (#15910)
* go-metrics: fork library and introduce ResettingTimer and InfluxDB reporter.

* vendor: change nonsense/go-metrics to ethersphere/go-metrics

* go-metrics: add tests. move ResettingTimer logic from reporter to type.

* all, metrics: pull in metrics package in go-ethereum

* metrics/test: make sure metrics are enabled for tests

* metrics: apply gosimple rules

* metrics/exp, internal/debug: init expvar endpoint when starting pprof server

* internal/debug: tiny comment formatting fix
2018-02-23 11:56:08 +02:00
Felix Lange a5c0bbb4f4
all: update license information (#16089) 2018-02-14 13:49:11 +01:00
Péter Szilágyi 55599ee95d core, trie: intermediate mempool between trie and database (#15857)
This commit reduces database I/O by not writing every state trie to disk.
2018-02-05 17:40:32 +01:00
Péter Szilágyi 216e584899
Revert "trie: make fullnode children hash calculation concurrently (#15131)" (#15889)
This reverts commit 0f7fbb85d6.
2018-01-15 15:32:14 +02:00
Furkan KAMACI b8caba9709 various: remove redundant parentheses (#15793) 2018-01-03 14:14:47 +02:00
gary rong 0f7fbb85d6 trie: make fullnode children hash calculation concurrently (#15131)
* trie: make fullnode children hash calculation concurrently

* trie: thread out only on topmost fullnode

* trie: clean up full node children hash calculation

* trie: minor code fixups
2017-11-27 13:34:17 +02:00
Felföldi Zsolt ca376ead88 les, light: LES/2 protocol version (#14970)
This PR implements the new LES protocol version extensions:

* new and more efficient Merkle proofs reply format (when replying to
  a multiple Merkle proofs request, we just send a single set of trie
  nodes containing all necessary nodes)
* BBT (BloomBitsTrie) works similarly to the existing CHT and contains
  the bloombits search data to speed up log searches
* GetTxStatusMsg returns the inclusion position or the
  pending/queued/unknown state of a transaction referenced by hash
* an optional signature of new block data (number/hash/td) can be
  included in AnnounceMsg to provide an option for "very light
  clients" (mobile/embedded devices) to skip expensive Ethash check
  and accept multiple signatures of somewhat trusted servers (still a
  lot better than trusting a single server completely and retrieving
  everything through RPC). The new client mode is not implemented in
  this PR, just the protocol extension.
2017-10-24 15:19:09 +02:00
Péter Szilágyi a5fcaa55ac
trie: make hasher benchmark meaningful post-caches 2017-10-13 11:22:38 +03:00
Paul Litvak a92d8a2654 trie: fix typo (#15152) 2017-09-18 23:07:19 +02:00
Felix Lange 10181b57a9 core, eth/downloader: commit block data using batches (#15115)
* ethdb: add Putter interface and Has method

* ethdb: improve docs and add IdealBatchSize

* ethdb: remove memory batch lock

Batches are not safe for concurrent use.

* core: use ethdb.Putter for Write* functions

This covers the easy cases.

* core/state: simplify StateSync

* trie: optimize local node check

* ethdb: add ValueSize to Batch

* core: optimize HasHeader check

This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.

* core: write fast sync block data in batches

Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.

* eth/downloader: commit larger state batches

Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.

* core: optimize HasBlock check

This avoids a random database read to get the number.

* core: use numberCache in HasHeader

numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.

* core: write imported block data using a batch

Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.

This commit also removes posting of logs when a forked block is imported.

* core: fix DB write error handling

* ethdb: use RLock for Has

* core: fix HasBlock comment
2017-09-09 19:03:07 +03:00
Petr Mikusek 99da85c895 trie: typo in comment 2017-07-25 19:02:40 +02:00
Felix Lange 9e5f03b6c4 core/state: access trie through Database interface, track errors (#14589)
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.

Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
2017-06-27 15:57:06 +02:00
Felix Lange 0042f13d47 eth/downloader: separate state sync from queue (#14460)
* eth/downloader: separate state sync from queue

Scheduling of state node downloads hogged the downloader queue lock when
new requests were scheduled. This caused timeouts for other requests.
With this change, state sync is fully independent of all other downloads
and doesn't involve the queue at all.

State sync is started and checked on in processContent. This is slightly
awkward because processContent doesn't have a select loop. Instead, the
queue is closed by an auxiliary goroutine when state sync fails. We
tried several alternatives to this but settled on the current approach
because it's the least amount of change overall.

Handling of the pivot block has changed slightly: the queue previously
prevented import of pivot block receipts before the state of the pivot
block was available. In this commit, the receipt will be imported before
the state. This causes an annoyance where the pivot block is committed
as fast block head even when state downloads fail. Stay tuned for more
updates in this area ;)

* eth/downloader: remove cancelTimeout channel

* eth/downloader: retry state requests on timeout

* eth/downloader: improve comment

* eth/downloader: mark peers idle when state sync is done

* eth/downloader: move pivot block splitting to processContent

This change also ensures that pivot block receipts aren't imported
before the pivot block itself.

* eth/downloader: limit state node retries

* eth/downloader: improve state node error handling and retry check

* eth/downloader: remove maxStateNodeRetries

It fails the sync too much.

* eth/downloader: remove last use of cancelCh in statesync.go

Fixes TestDeliverHeadersHang*Fast and (hopefully)
the weird cancellation behaviour at the end of fast sync.

* eth/downloader: fix leak in runStateSync

* eth/downloader: don't run processFullSyncContent in LightSync mode

* eth/downloader: improve comments

* eth/downloader: fix vet, megacheck

* eth/downloader: remove unrequested tasks anyway

* eth/downloader, trie: various polishes around duplicate items

This commit explicitly tracks duplicate and unexpected state
delieveries done against a trie Sync structure, also adding
there to import info logs.

The commit moves the db batch used to commit trie changes one
level deeper so its flushed after every node insertion. This
is needed to avoid a lot of duplicate retrievals caused by
inconsistencies between Sync internals and database. A better
approach is to track not-yet-written states in trie.Sync and
flush on commit, but I'm focuing on correctness first now.

The commit fixes a regression around pivot block fail count.
The counter previously was reset to 1 if and only if a sync
cycle progressed (inserted at least 1 entry to the database).
The current code reset it already if a node was delivered,
which is not stong enough, because unless it ends up written
to disk, an attacker can just loop and attack ad infinitum.

The commit also fixes a regression around state deliveries
and timeouts. The old downloader tracked if a delivery is
stale (none of the deliveries were requestedt), in which
case it didn't mark the node idle and did not send further
requests, since it signals a past timeout. The current code
did mark it idle even on stale deliveries, which eventually
caused two requests to be in flight at the same time, making
the deliveries always stale and mass duplicating retrievals
between multiple peers.

* eth/downloader: fix state request leak

This commit fixes the hang seen sometimes while doing the state
sync. The cause of the hang was a rare combination of events:
request state data from peer, peer drops and reconnects almost
immediately. This caused a new download task to be assigned to
the peer, overwriting the old one still waiting for a timeout,
which in turned leaked the requests out, never to be retried.
The fix is to ensure that a task assignment moves any pending
one back into the retry queue.

The commit also fixes a regression with peer dropping due to
stalls. The current code considered a peer stalling if they
timed out delivering 1 item. However, the downloader never
requests only one, the minimum is 2 (attempt to fine tune
estimated latency/bandwidth). The fix is simply to drop if
a timeout is detected at 2 items.

Apart from the above bugfixes, the commit contains some code
polishes I made while debugging the hang.

* core, eth, trie: support batched trie sync db writes

* trie: rename SyncMemCache to syncMemBatch
2017-06-22 15:26:03 +03:00
Felix Lange 693d9ccbfb trie: more node iterator improvements (#14615)
* ethdb: remove Set

Set deadlocks immediately and isn't part of the Database interface.

* trie: add Err to Iterator

This is useful for testing because the underlying NodeIterator doesn't
need to be kept in a separate variable just to get the error.

* trie: add LeafKey to iterator, panic when not at leaf

LeafKey is useful for callers that can't interpret Path.

* trie: retry failed seek/peek in iterator Next

Instead of failing iteration irrecoverably, make it so Next retries the
pending seek or peek every time.

Smaller changes in this commit make this easier to test:

* The iterator previously returned from Next on encountering a hash
  node. This caused it to visit the same path twice.
* Path returned nibbles with terminator symbol for valueNode attached
  to fullNode, but removed it for valueNode attached to shortNode. Now
  the terminator is always present. This makes Path unique to each node
  and simplifies Leaf.

* trie: add Path to MissingNodeError

The light client trie iterator needs to know the path of the node that's
missing so it can retrieve a proof for it. NodeIterator.Path is not
sufficient because it is updated when the node is resolved and actually
visited by the iterator.

Also remove unused fields. They were added a long time ago before we
knew which fields would be needed for the light client.
2017-06-20 18:26:09 +02:00
S. Matthew English 061889d4ea rlp, trie, contracts, compression, consensus: improve comments (#14580) 2017-06-12 14:45:17 +02:00
Felix Lange 4047ccad2f trie: add start key to NodeIterator constructors
The 'step' method is split into two parts, 'peek' and 'push'. peek
returns the next state but doesn't make it current.

The end of iteration was previously tracked by setting 'trie' to nil.
End of iteration is now tracked using the 'iteratorEnd' error, which is
slightly cleaner and requires less code.
2017-04-25 02:14:31 +02:00
Felix Lange a13e920af0 trie: clean up iterator constructors
Make it so each iterator has exactly one public constructor:

- NodeIterators can be created through a method.
- Iterators can be created through NewIterator on any NodeIterator.
2017-04-25 02:14:31 +02:00
Felix Lange f958d7d482 trie: rework and document key encoding
'encode' and 'decode' are meaningless because the code deals with three
encodings. Document the encodings and give a name to each one.
2017-04-25 02:14:31 +02:00
Felix Lange a31d268b76 trie: remove Key in MissingNodeError
The key was constructed from nibbles, which isn't possible for all
nodes. Remove the only use of Key in LightTrie by always retrying with
the original key that was looked up.
2017-04-18 14:52:11 +02:00
Nick Johnson b35aa21f9f trie: implement unionIterator (#14312) 2017-04-13 11:14:19 +02:00
Péter Szilágyi 09777952ee core, consensus: pluggable consensus engines (#3817)
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
2017-04-05 00:16:29 +02:00
Felix Lange f1534f5797 trie, whisper/whisperv5: use math/rand Read function 2017-03-22 20:49:15 +01:00
Péter Szilágyi d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Nick Johnson 555273495b trie: add difference iterator (#3637)
This PR implements a differenceIterator, which allows iterating over trie nodes
that exist in one trie but not in another. This is a prerequisite for most GC
strategies, in order to find obsolete nodes.
2017-02-22 23:49:34 +01:00
Felix Lange b9b3efb09f all: fix ineffectual assignments and remove uses of crypto.Sha3
go get github.com/gordonklaus/ineffassign
ineffassign .
2017-01-09 16:24:42 +01:00
Péter Szilágyi 18c77744ff
all: fix spelling errors 2017-01-06 19:44:35 +02:00
Felix Lange f2da6581ba all: fix issues reported by honnef.co/go/simple/cmd/gosimple 2017-01-06 18:18:07 +01:00
Felix Lange 35a7dcb162 all: gofmt -w -s 2017-01-06 15:52:03 +01:00
Felix Lange d3b751e4d9 trie: remove dependency on ethdb
This removes the core/types -> leveldb dependency.
2017-01-06 14:15:22 +01:00
Péter Szilágyi 90b16a3e85
core/state, eth/downloader, trie: reset fast-failure on progress 2016-10-31 14:19:14 +02:00
Péter Szilágyi f8608a5228 trie: while fast syncing, don't keep trie nodes in memory (#3186) 2016-10-21 17:34:17 +02:00
Péter Szilágyi 88a593d559
cmd/geth, trie: report on trie cache unloads, also add debug log 2016-10-19 17:31:19 +03:00
Felix Lange 5d9bb0a050 trie: add metric to track cache unloading (#3175) 2016-10-19 16:07:19 +02:00
Felix Lange d48e6ae66f trie: make the cache miss counter a real metric 2016-10-19 15:22:37 +02:00
Jeffrey Wilcke 25ac04a444 Merge pull request #3153 from fjl/trie-unload-fix
trie: improve cache unloading mechanism
2016-10-19 13:35:49 +02:00
Péter Szilágyi 2bb5ec1e41
cmd/geth, trie: track and report trie cache misses 2016-10-19 14:12:35 +03:00
Felix Lange 8d56bf5ceb trie: ensure dirty flag is unset for embedded child nodes
This was caught by the new invariant check.
2016-10-18 04:57:47 +02:00
Felix Lange 177cab5fe7 trie: ensure resolved nodes stay loaded
Commit 40cdcf1183 broke the optimisation which kept nodes resolved
during Get in the trie. The decoder assigned cache generation 0
unconditionally, causing resolved nodes to get flushed on Commit.

This commit fixes it and adds two tests.
2016-10-18 04:57:47 +02:00
Felix Lange 187d6a66a5 trie: avoid loading the root node twice
New checks whether the root node is present by loading it from the
database. Keep the node around instead of discarding it.
2016-10-18 04:57:47 +02:00
Felix Lange 2cd7a0395d trie: fix regression that linked all downloaded nodes together
The trie sync code links subtries using pointers into node structs.
Since commit 40cdcf1183 nodes are no longer copied when unpacking from
an interface value, causing all nodes to get linked up as the sync
progresses. Fix it by breaking the pointer chain with an explicit copy.
2016-10-15 00:42:52 +02:00
Felix Lange 40cdcf1183 trie, core/state: improve memory usage and performance (#3135)
* trie: store nodes as pointers

This avoids memory copies when unwrapping node interface values.

name      old time/op  new time/op  delta
Get        388ns ± 8%   215ns ± 2%  -44.56%  (p=0.000 n=15+15)
GetDB      363ns ± 3%   202ns ± 2%  -44.21%  (p=0.000 n=15+15)
UpdateBE  1.57µs ± 2%  1.29µs ± 3%  -17.80%  (p=0.000 n=13+15)
UpdateLE  1.92µs ± 2%  1.61µs ± 2%  -16.25%  (p=0.000 n=14+14)
HashBE    2.16µs ± 6%  2.18µs ± 6%     ~     (p=0.436 n=15+15)
HashLE    7.43µs ± 3%  7.21µs ± 3%   -2.96%  (p=0.000 n=15+13)

* trie: close temporary databases in GetDB benchmark

* trie: don't keep []byte from DB load around

Nodes decoded from a DB load kept hashes and values as sub-slices of
the DB value. This can be a problem because loading from leveldb often
returns []byte with a cap that's larger than necessary, increasing
memory usage.

* trie: unload old cached nodes

* trie, core/state: use cache unloading for account trie

* trie: use explicit private flags (fixes Go 1.5 reflection issue).

* trie: fixup cachegen overflow at request of nick

* core/state: rename journal size constant
2016-10-14 19:04:33 +03:00