Commit Graph

72 Commits

Author SHA1 Message Date
Felix Lange 3239aca69b p2p: bump global write timeout to 20s
The previous value of 5 seconds causes timeouts for legitimate messages
if large messages are sent.
2015-06-09 17:07:10 +02:00
Péter Szilágyi 68898a4d6b p2p: fix Self() panic if listening is disabled 2015-05-26 19:16:05 +03:00
Péter Szilágyi e1a0ee8fc5 cmd/geth, cmd/utils, eth, p2p: pass and honor a no discovery flag 2015-05-26 19:07:24 +03:00
Péter Szilágyi 278183c7e7 eth, p2p: start the p2p server even if maxpeers == 0 2015-05-26 17:49:37 +03:00
Felix Lange 9e1fd70b50 p2p: decrease frameReadTimeout to 30s
This detects hanging connections sooner. We send a ping every 15s and
other implementation have similar limits.
2015-05-25 01:17:14 +02:00
Felix Lange 1440f9a37a p2p: new dialer, peer management without locks
The most visible change is event-based dialing, which should be an
improvement over the timer-based system that we have at the moment.
The dialer gets a chance to compute new tasks whenever peers change or
dials complete. This is better than checking peers on a timer because
dials happen faster. The dialer can now make more precise decisions
about whom to dial based on the peer set and we can test those
decisions without actually opening any sockets.

Peer management is easier to test because the tests can inject
connections at checkpoints (after enc handshake, after protocol
handshake).

Most of the handshake stuff is now part of the RLPx code. It could be
exported or move to its own package because it is no longer entangled
with Server logic.
2015-05-25 01:17:14 +02:00
Felix Lange dbdc5fd4b3 p2p: delete Server.Broadcast 2015-05-25 01:17:14 +02:00
Felix Lange 7efeb4bd96 p2p: bump maxAcceptConns and defaultDialTimout
On the test network, we've seen that it becomes harder to connect
if the queues are so short.
2015-05-14 03:48:28 +02:00
Felix Lange d4f0a67323 p2p: drop connections with no matching protocols 2015-05-08 16:09:55 +02:00
Felix Lange 9c0f36c46d p2p: use maxDialingConns instead of maxAcceptConns as dial limit 2015-05-08 16:09:55 +02:00
Felix Lange 914e57e49b p2p: fix disconnect at capacity
With the introduction of static/trusted nodes, the peer count
can go above MaxPeers. Update the capacity check to handle this.
While here, decouple the trusted nodes check from the handshake
by passing a function instead.
2015-05-08 16:09:54 +02:00
Péter Szilágyi 4d5a719f25 cmd, eth, p2p: introduce pending peer cli arg, add tests 2015-05-07 15:30:56 +03:00
Péter Szilágyi af93217775 p2p: reduce the concurrent handshakes to 10/10 in/out 2015-05-07 15:22:09 +03:00
Péter Szilágyi 2060bc8bac p2p: fix dial throttling race condition 2015-05-07 15:22:08 +03:00
Péter Szilágyi 29fef349ef p2p: fix a dialing race in the throttler 2015-05-07 15:22:08 +03:00
Péter Szilágyi 3953bf0031 p2p: limit the outbound dialing too 2015-05-07 15:22:08 +03:00
Jeffrey Wilcke a0cb1945ae Merge pull request #866 from fjl/p2p-last-minute
Last minute p2p fixes
2015-05-06 14:49:52 -07:00
Felix Lange 3e2a928caa p2p: stop dialing at half the maximum peer count 2015-05-06 23:44:51 +02:00
obscuren 062fa049d0 fixed merge issue 2015-05-06 22:54:21 +02:00
Péter Szilágyi 4accc187d5 eth, p2p: add trusted node list beside static list 2015-05-04 13:59:51 +03:00
Péter Szilágyi 54db54931e p2p: add static node dialing test 2015-05-04 13:08:42 +03:00
Péter Szilágyi e82ddd9198 p2p: correct a leftover trusted -> static 2015-04-30 19:34:33 +03:00
Péter Szilágyi 413ace37d3 eth, p2p: rename trusted nodes to static, drop inbound extra slots 2015-04-30 19:32:48 +03:00
Péter Szilágyi 701591b403 cmd, eth, p2p: fix review issues enumerated by Felix 2015-04-30 16:15:29 +03:00
Péter Szilágyi 1528dbc171 p2p: add trust check to handshake, test privileged connectivity
Conflicts:
	p2p/server_test.go
2015-04-30 16:06:47 +03:00
Péter Szilágyi 14f32a0c3a p2p: reduce the severity of a debug log 2015-04-30 16:04:09 +03:00
Péter Szilágyi de0549fabb cmd/geth, cmd/mist, cmd/utils, eth, p2p: support trusted peers 2015-04-30 16:03:10 +03:00
Felix Lange fc747ef4a6 p2p/discover: new endpoint format
This commit changes the discovery protocol to use the new "v4" endpoint
format, which allows for separate UDP and TCP ports and makes it
possible to discover the UDP address after NAT.
2015-04-30 14:57:33 +02:00
Péter Szilágyi 8646365b42 cmd/bootnode, eth, p2p, p2p/discover: use a fancier db design 2015-04-24 18:04:41 +03:00
Péter Szilágyi 6def110c37 cmd/bootnode, eth, p2p, p2p/discover: clean up the seeder and mesh into eth. 2015-04-24 11:33:55 +03:00
Péter Szilágyi 5f735d6fce cmd, eth, p2p, p2p/discover: init and clean up the seed cache 2015-04-24 11:23:20 +03:00
Felix Lange 635b66acdc p2p: return zero node from Self if the server is not running
This helps with fixing the tests for cmd/geth to run without networking.
2015-04-22 12:31:19 +02:00
Felix Lange 5528abc795 p2p: fix the dial timer
The dial timer was not reset properly when the peer count reached
MaxPeers.
2015-04-17 08:17:01 +02:00
obscuren 474aa924ca p2p: added limiter function to limit package broadcasting 2015-04-14 12:47:31 +02:00
Felix Lange b9929d289d p2p: fix unsynchronized map access during Server shutdown
removePeer can be called even after listenLoop and dialLoop have returned.
2015-04-13 17:37:32 +02:00
Felix Lange c5332537f5 p2p: limit number of lingering inbound pre-handshake connections
This is supposed to apply some back pressure so Server is not accepting
more connections than it can actually handle. The current limit is 50.
This doesn't really need to be configurable, but we'll see how it
behaves in our test nodes and adjust accordingly.
2015-04-10 17:24:41 +02:00
Felix Lange 56977c225e p2p: use RLock instead of Lock for pre-dial checks 2015-04-10 17:23:09 +02:00
Felix Lange b3c058a9e4 p2p: improve disconnect signaling at handshake time
As of this commit, p2p will disconnect nodes directly after the
encryption handshake if too many peer connections are active.
Errors in the protocol handshake packet are now handled more politely
by sending a disconnect packet before closing the connection.
2015-04-10 16:57:56 +02:00
Felix Lange 145330fdf2 p2p: properly decrement peer wait group counter for setup errors 2015-04-10 13:26:27 +02:00
Felix Lange 22d1f0faf1 p2p: improve peer selection logic
This commit introduces a new (temporary) peer selection
strategy based on random lookups.

While we're here, also implement the TODOs in dialLoop.
2015-04-10 13:26:27 +02:00
obscuren 688d118c7e Updated logging 2015-04-07 14:57:04 +02:00
Felix Lange 5ba51594c7 p2p: use package rlp to encode messages
Message encoding functions have been renamed to catch any uses.
The switch to the new encoder can cause subtle incompatibilities.
If there are any users outside of our tree, they will at least be
alerted that there was a change.

NewMsg no longer exists. The replacements for EncodeMsg are called
Send and SendItems.
2015-03-19 15:11:02 +01:00
zelig b3e133dd15 Merge branch 'frontier/js' into frontier/nodeadmin.js 2015-03-16 22:50:29 +07:00
obscuren b523441361 Moved ethutil => common 2015-03-16 11:27:38 +01:00
zelig e150832734 p2p: server>discover table Self=Node exported 2015-03-15 13:38:41 +07:00
Taylor Gerring 485e37e889 Move MakeName to ethutil 2015-03-11 14:29:07 -05:00
Felix Lange 215c763d53 eth, p2p: delete p2p.Blacklist
It is unused and untested right now. We can
bring it back later if required.
2015-03-04 16:54:36 +01:00
Felix Lange 22659a7fea p2p: restore read/write timeouts
They got lost in the transition to rlpxFrameRW.
2015-03-04 16:42:00 +01:00
Felix Lange 7964f30dcb p2p: msg.Payload contains list data
With RLPx frames, the message code is contained in the
frame and is no longer part of the encoded data.

EncodeMsg, Msg.Decode have been updated to match.
Code that decodes RLP directly from Msg.Payload will need
to change.
2015-03-04 12:27:24 +01:00
Felix Lange 736e632215 p2p: use RLPx frames for messaging 2015-03-04 12:27:23 +01:00