2020-02-14 00:23:57 -08:00
|
|
|
# 8Channel EGT-board
|
2020-02-14 00:23:34 -08:00
|
|
|
|
|
|
|
|
This is repository for 8-Channel EGT board. The board is meant to be used in conjuntion with aftermarker engine control units to
|
2020-02-14 00:25:09 -08:00
|
|
|
measure exhaust gas temperatures in invidual cylinders. The PCB is based on eight MAX31855 chips and STM32F103C8T6 bluepill board.
|
2020-02-14 00:23:34 -08:00
|
|
|
The sensors to be used with this need to be K-type EGT sensors with mini K-type thermocouple connectors.
|
|
|
|
|
|
|
|
|
|
In order to program the bluepill, you will need FTDI breakout board and the code is meant to be used in Arduino IDE. The code should work
|
|
|
|
|
with regular STM32 core for Arduino, but I had no luck programming it to the bluepill. But using this board manager, the code uploading
|
|
|
|
|
works: http://dan.drown.org/stm32duino/package_STM32duino_index.json
|
|
|
|
|
|
2020-02-17 07:59:28 -08:00
|
|
|
At this moment the code is unfinished and only capable of reading the EGT sensors and sending data to speeduino through serial bus.
|
|
|
|
|
See the picture for settings in TS for speeduino. Support for other ecus will be added later using CAN bus.
|
2020-02-14 00:31:50 -08:00
|
|
|
|
2020-02-14 00:39:55 -08:00
|
|
|
EasyEda project link for the PCB: https://easyeda.com/pazi88/8ch_EGT
|
