diff --git a/demos/NRF51/MICROBIT/Makefile b/demos/NRF51/MICROBIT/Makefile index fec59c6c..aa516e06 100644 --- a/demos/NRF51/MICROBIT/Makefile +++ b/demos/NRF51/MICROBIT/Makefile @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -100,27 +102,22 @@ include $(CHIBIOS)/os/hal/lib/streams/streams.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(STREAMSSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -143,14 +140,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/demos/NRF51/MICROBIT/chconf.h b/demos/NRF51/MICROBIT/chconf.h index 14c1bf3b..1750f63c 100644 --- a/demos/NRF51/MICROBIT/chconf.h +++ b/demos/NRF51/MICROBIT/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Fabio Utzig + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/demos/NRF51/MICROBIT/halconf_community.h b/demos/NRF51/MICROBIT/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/demos/NRF51/MICROBIT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/demos/NRF51/MICROBIT/main.c b/demos/NRF51/MICROBIT/main.c index 4a9b24c1..001420b2 100644 --- a/demos/NRF51/MICROBIT/main.c +++ b/demos/NRF51/MICROBIT/main.c @@ -16,7 +16,8 @@ #include "ch.h" #include "hal.h" -#include "ch_test.h" +#include "rt_test_root.h" +#include "oslib_test_root.h" /* See: https://lancaster-university.github.io/microbit-docs/ubit/display/ */ @@ -76,7 +77,8 @@ int main(void) { chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - test_execute((BaseSequentialStream *)&SD1); + test_execute((BaseSequentialStream *)&SD1, &rt_test_suite); + test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite); while (1) { chThdSleepMilliseconds(500); } diff --git a/demos/NRF51/OSHCHIP_V1.0/Makefile b/demos/NRF51/OSHCHIP_V1.0/Makefile index 32ec1d8b..27255b8a 100644 --- a/demos/NRF51/OSHCHIP_V1.0/Makefile +++ b/demos/NRF51/OSHCHIP_V1.0/Makefile @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -99,26 +101,22 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -141,13 +139,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/demos/NRF51/OSHCHIP_V1.0/chconf.h b/demos/NRF51/OSHCHIP_V1.0/chconf.h index 14c1bf3b..1750f63c 100644 --- a/demos/NRF51/OSHCHIP_V1.0/chconf.h +++ b/demos/NRF51/OSHCHIP_V1.0/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Fabio Utzig + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/demos/NRF51/OSHCHIP_V1.0/halconf_community.h b/demos/NRF51/OSHCHIP_V1.0/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/demos/NRF51/OSHCHIP_V1.0/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/demos/NRF51/OSHCHIP_V1.0/main.c b/demos/NRF51/OSHCHIP_V1.0/main.c index 8e386fb6..1fd58af8 100644 --- a/demos/NRF51/OSHCHIP_V1.0/main.c +++ b/demos/NRF51/OSHCHIP_V1.0/main.c @@ -16,7 +16,8 @@ #include "ch.h" #include "hal.h" -#include "ch_test.h" +#include "rt_test_root.h" +#include "oslib_test_root.h" static THD_WORKING_AREA(waThread1, 64); static THD_FUNCTION(Thread1, arg) { @@ -74,7 +75,8 @@ int main(void) { */ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - test_execute((BaseSequentialStream *)&SD1); + test_execute((BaseSequentialStream *)&SD1, &rt_test_suite); + test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite); while (1) { chThdSleepMilliseconds(500); } diff --git a/demos/NRF51/RT-WVSHARE_BLE400/Makefile b/demos/NRF51/RT-WVSHARE_BLE400/Makefile index cb1ee350..29949a5b 100644 --- a/demos/NRF51/RT-WVSHARE_BLE400/Makefile +++ b/demos/NRF51/RT-WVSHARE_BLE400/Makefile @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -99,26 +101,22 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -141,13 +139,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/demos/NRF51/RT-WVSHARE_BLE400/chconf.h b/demos/NRF51/RT-WVSHARE_BLE400/chconf.h index 14c1bf3b..1750f63c 100644 --- a/demos/NRF51/RT-WVSHARE_BLE400/chconf.h +++ b/demos/NRF51/RT-WVSHARE_BLE400/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Fabio Utzig + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/demos/NRF51/RT-WVSHARE_BLE400/halconf_community.h b/demos/NRF51/RT-WVSHARE_BLE400/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/demos/NRF51/RT-WVSHARE_BLE400/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/demos/NRF51/RT-WVSHARE_BLE400/main.c b/demos/NRF51/RT-WVSHARE_BLE400/main.c index 6b25a647..4b9e76a2 100644 --- a/demos/NRF51/RT-WVSHARE_BLE400/main.c +++ b/demos/NRF51/RT-WVSHARE_BLE400/main.c @@ -16,7 +16,8 @@ #include "ch.h" #include "hal.h" -#include "ch_test.h" +#include "rt_test_root.h" +#include "oslib_test_root.h" static THD_WORKING_AREA(waThread1, 64); static THD_FUNCTION(Thread1, arg) { @@ -63,7 +64,8 @@ int main(void) { */ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - test_execute((BaseSequentialStream *)&SD1); + test_execute((BaseSequentialStream *)&SD1, &rt_test_suite); + test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite); while (1) { chThdSleepMilliseconds(500); } diff --git a/demos/NRF52/Classic/Makefile b/demos/NRF52/Classic/Makefile index 0f318b1e..8742dd38 100644 --- a/demos/NRF52/Classic/Makefile +++ b/demos/NRF52/Classic/Makefile @@ -3,9 +3,6 @@ # NOTE: Can be overridden externally. # -PLATFORM=NRF5/NRF52832 -BOARD=NRF52-DK - # Compiler options here. ifeq ($(USE_OPT),) USE_OPT = -Os -ggdb -fomit-frame-pointer -falign-functions=16 -std=c11 @@ -49,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -91,19 +88,23 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf52.mk # HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/$(PLATFORM)/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF5/NRF52832/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/NRF52-DK/board.mk include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk include $(CHIBIOS)/os/various/shell/shell.mk # Define linker script file here @@ -111,23 +112,13 @@ LDSCRIPT= $(STARTUPLD)/NRF52832.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ - $(SHELLSRC) \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c - -CSRC += main.c + main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -150,18 +141,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(SHELLINC) \ - $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various - - -INCDIR += $(CHIBIOS_CONTRIB)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/demos/NRF52/Classic/chconf.h b/demos/NRF52/Classic/chconf.h index c7ec8762..1750f63c 100644 --- a/demos/NRF52/Classic/chconf.h +++ b/demos/NRF52/Classic/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2016 Stephane D'Alu + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 0 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,23 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif /** * @brief Trace buffer entries. * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. + * different from @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) #define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -384,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -394,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -405,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -416,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -425,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -447,7 +613,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -525,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/demos/NRF52/Classic/halconf_community.h b/demos/NRF52/Classic/halconf_community.h index 907a7a6c..e655bfc4 100644 --- a/demos/NRF52/Classic/halconf_community.h +++ b/demos/NRF52/Classic/halconf_community.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2016 Stéphane D'Alu + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,10 +14,8 @@ limitations under the License. */ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H /** * @brief Enables the community overlay. @@ -26,17 +24,116 @@ #define HAL_USE_COMMUNITY TRUE #endif +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif /** - * @brief Enables the community subsystem. + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. */ #if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) #define HAL_USE_RNG TRUE #endif +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif -#define HAL_USE_QEI TRUE +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE /*===========================================================================*/ /* QEI driver related settings. */ @@ -46,26 +143,31 @@ * @brief Enables discard of overlow */ #if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) -#define QEI_USE_OVERFLOW_DISCARD TRUE +#define QEI_USE_OVERFLOW_DISCARD FALSE #endif /** - * @brief Enables discard of overlow + * @brief Enables min max of overlow */ #if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) -#define QEI_USE_OVERFLOW_MINMAX TRUE +#define QEI_USE_OVERFLOW_MINMAX FALSE #endif +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE +#endif /* HALCONF_COMMUNITY_H */ - -//#define HAL_USE_SOFTDEVICE TRUE - -#define HAL_USE_CAPSENSE TRUE -#define CAPSENSE_USE_WAIT TRUE -#define CAPSENSE_USE_MUTUAL_EXCLUSION TRUE - - - -#endif /* _HALCONF_COMMUNITY_H_ */ +/** @} */ diff --git a/demos/NRF52/Classic/main.c b/demos/NRF52/Classic/main.c index 28e7505a..aa923b0e 100644 --- a/demos/NRF52/Classic/main.c +++ b/demos/NRF52/Classic/main.c @@ -5,7 +5,8 @@ #include "hal.h" #include "chprintf.h" #include "shell.h" -#include "ch_test.h" +#include "rt_test_root.h" +#include "oslib_test_root.h" #define LED_EXT 14 diff --git a/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk b/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk index 8ec318f4..36da1464 100644 --- a/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk +++ b/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk @@ -1,11 +1,16 @@ # List of the ChibiOS generic NRF51 startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c +STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v6m.S +STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v6m.S \ + $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.S STARTUPINC = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/NRF51822 \ $(CHIBIOS)/os/common/ext/CMSIS/include \ $(CHIBIOS)/os/common/ext/ARM/CMSIS/Core/Include STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld + +# Shared variables +ALLXASMSRC += $(STARTUPASM) +ALLCSRC += $(STARTUPSRC) +ALLINC += $(STARTUPINC) diff --git a/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf52.mk b/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf52.mk index 450ec41c..e95f33de 100644 --- a/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf52.mk +++ b/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf52.mk @@ -1,11 +1,16 @@ # List of the ChibiOS generic NRF51 startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c +STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v7m.S +STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v7m.S \ + $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.S STARTUPINC = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/NRF52832 \ $(CHIBIOS)/os/common/ext/CMSIS/include \ $(CHIBIOS)/os/common/ext/ARM/CMSIS/Core/Include STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld + +# Shared variables +ALLXASMSRC += $(STARTUPASM) +ALLCSRC += $(STARTUPSRC) +ALLINC += $(STARTUPINC) diff --git a/os/hal/boards/MICROBIT/board.mk b/os/hal/boards/MICROBIT/board.mk index 3595b1ab..8e26ae6a 100644 --- a/os/hal/boards/MICROBIT/board.mk +++ b/os/hal/boards/MICROBIT/board.mk @@ -3,3 +3,7 @@ BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/MICROBIT/board.c # Required include directories BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/MICROBIT + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/os/hal/boards/NRF51-DK/board.mk b/os/hal/boards/NRF51-DK/board.mk index 631927b3..3e3e465f 100644 --- a/os/hal/boards/NRF51-DK/board.mk +++ b/os/hal/boards/NRF51-DK/board.mk @@ -9,3 +9,7 @@ JLINK_DEVICE = nrf51422 JLINK_PRE_FLASH = w4 4001e504 1 JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 JLINK_PIN_RESET = w4 40000544 1 + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/os/hal/boards/NRF52-DK/board.mk b/os/hal/boards/NRF52-DK/board.mk index 43102915..b296d27b 100644 --- a/os/hal/boards/NRF52-DK/board.mk +++ b/os/hal/boards/NRF52-DK/board.mk @@ -10,3 +10,6 @@ JLINK_PRE_FLASH = w4 4001e504 1 #JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 JLINK_PIN_RESET = w4 40000544 1 +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/os/hal/boards/OSHCHIP_V1.0/board.mk b/os/hal/boards/OSHCHIP_V1.0/board.mk index 08afdbd2..de1c59d4 100644 --- a/os/hal/boards/OSHCHIP_V1.0/board.mk +++ b/os/hal/boards/OSHCHIP_V1.0/board.mk @@ -3,3 +3,7 @@ BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/OSHCHIP_V1.0/board.c # Required include directories BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/OSHCHIP_V1.0 + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/os/hal/boards/WVSHARE_BLE400/board.mk b/os/hal/boards/WVSHARE_BLE400/board.mk index ade4201c..684efebc 100644 --- a/os/hal/boards/WVSHARE_BLE400/board.mk +++ b/os/hal/boards/WVSHARE_BLE400/board.mk @@ -3,3 +3,7 @@ BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400/board.c # Required include directories BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400 + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/os/hal/ports/NRF5/LLD/GPIOv1/hal_pal_lld.h b/os/hal/ports/NRF5/LLD/GPIOv1/hal_pal_lld.h index 4bb14e25..a005d50c 100644 --- a/os/hal/ports/NRF5/LLD/GPIOv1/hal_pal_lld.h +++ b/os/hal/ports/NRF5/LLD/GPIOv1/hal_pal_lld.h @@ -119,6 +119,11 @@ typedef uint32_t ioline_t; */ typedef NRF_GPIO_Type *ioportid_t; +/** + * @brief Type of an pad identifier. + */ +typedef uint32_t iopadid_t; + /*===========================================================================*/ /* I/O Ports Identifiers. */ /*===========================================================================*/ diff --git a/testhal/NRF51/NRF51822/ADC/Makefile b/testhal/NRF51/NRF51822/ADC/Makefile index 9024eb18..ee5667b0 100644 --- a/testhal/NRF51/NRF51822/ADC/Makefile +++ b/testhal/NRF51/NRF51822/ADC/Makefile @@ -83,6 +83,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -94,26 +96,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -136,11 +132,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/ADC/chconf.h b/testhal/NRF51/NRF51822/ADC/chconf.h index 790132e4..1750f63c 100644 --- a/testhal/NRF51/NRF51822/ADC/chconf.h +++ b/testhal/NRF51/NRF51822/ADC/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Stephen Caudle + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE TRUE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/ADC/halconf_community.h b/testhal/NRF51/NRF51822/ADC/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/ADC/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/EXT/Makefile b/testhal/NRF51/NRF51822/EXT/Makefile index 21c415a6..9cdc41db 100644 --- a/testhal/NRF51/NRF51822/EXT/Makefile +++ b/testhal/NRF51/NRF51822/EXT/Makefile @@ -43,6 +43,12 @@ ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no endif +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + # # Build global options ############################################################################## @@ -82,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -93,26 +101,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -135,11 +137,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/EXT/chconf.h b/testhal/NRF51/NRF51822/EXT/chconf.h index eeb3fa33..0ac7be8c 100644 --- a/testhal/NRF51/NRF51822/EXT/chconf.h +++ b/testhal/NRF51/NRF51822/EXT/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Stephen Caudle + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/EXT/halconf_community.h b/testhal/NRF51/NRF51822/EXT/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/EXT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/GPT/Makefile b/testhal/NRF51/NRF51822/GPT/Makefile index 9024eb18..ee5667b0 100644 --- a/testhal/NRF51/NRF51822/GPT/Makefile +++ b/testhal/NRF51/NRF51822/GPT/Makefile @@ -83,6 +83,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -94,26 +96,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -136,11 +132,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/GPT/chconf.h b/testhal/NRF51/NRF51822/GPT/chconf.h index 790132e4..1750f63c 100644 --- a/testhal/NRF51/NRF51822/GPT/chconf.h +++ b/testhal/NRF51/NRF51822/GPT/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Stephen Caudle + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE TRUE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/GPT/halconf_community.h b/testhal/NRF51/NRF51822/GPT/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/I2C/Makefile b/testhal/NRF51/NRF51822/I2C/Makefile index 21c415a6..784ba49c 100644 --- a/testhal/NRF51/NRF51822/I2C/Makefile +++ b/testhal/NRF51/NRF51822/I2C/Makefile @@ -82,6 +82,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -93,26 +95,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -135,11 +131,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/I2C/chconf.h b/testhal/NRF51/NRF51822/I2C/chconf.h index 3f6766a8..1750f63c 100644 --- a/testhal/NRF51/NRF51822/I2C/chconf.h +++ b/testhal/NRF51/NRF51822/I2C/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Stephen Caudle + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ -#define CH_CFG_USE_MESSAGES FALSE +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ -#define CH_CFG_USE_MAILBOXES FALSE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES FALSE +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ -#define CH_CFG_USE_MEMCORE FALSE +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ -#define CH_CFG_USE_HEAP FALSE +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ -#define CH_CFG_USE_MEMPOOLS FALSE +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ -#define CH_CFG_USE_DYNAMIC FALSE +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE TRUE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/I2C/halconf_community.h b/testhal/NRF51/NRF51822/I2C/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/I2C/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/PWM/Makefile b/testhal/NRF51/NRF51822/PWM/Makefile index de6ba9fe..cc7bc1b5 100644 --- a/testhal/NRF51/NRF51822/PWM/Makefile +++ b/testhal/NRF51/NRF51822/PWM/Makefile @@ -91,6 +91,8 @@ CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # HAL-OSAL files (optional). include $(CHIBIOS)/os/hal/hal.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF5/NRF51822/platform.mk @@ -100,25 +102,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -141,13 +138,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/PWM/chconf.h b/testhal/NRF51/NRF51822/PWM/chconf.h index 14c1bf3b..1750f63c 100644 --- a/testhal/NRF51/NRF51822/PWM/chconf.h +++ b/testhal/NRF51/NRF51822/PWM/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Fabio Utzig + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/PWM/halconf_community.h b/testhal/NRF51/NRF51822/PWM/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/PWM/main.c b/testhal/NRF51/NRF51822/PWM/main.c index 51179d8e..5e7e8256 100644 --- a/testhal/NRF51/NRF51822/PWM/main.c +++ b/testhal/NRF51/NRF51822/PWM/main.c @@ -46,8 +46,6 @@ int main(void) { .ioline = LINE_LED2, .gpiote_channel = 0, .ppi_channel = { 0, 1 } }, - { .mode = PWM_OUTPUT_DISABLED, - .callback = NULL, }, }, }; diff --git a/testhal/NRF51/NRF51822/RNG/Makefile b/testhal/NRF51/NRF51822/RNG/Makefile index 1c2acf27..95201520 100644 --- a/testhal/NRF51/NRF51822/RNG/Makefile +++ b/testhal/NRF51/NRF51822/RNG/Makefile @@ -86,8 +86,9 @@ CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk include $(CHIBIOS_CONTRIB)/os/hal/hal.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF5/NRF51822/platform.mk include $(CHIBIOS_CONTRIB)/os/hal/boards/NRF51-DK/board.mk @@ -96,8 +97,11 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk include $(CHIBIOS)/os/various/shell/shell.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk # Define linker script file here @@ -105,22 +109,13 @@ LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ - $(SHELLSRC) \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -143,15 +138,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(SHELLINC) \ - $(CHIBIOS)/os/hal/lib/streams \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/RNG/chconf.h b/testhal/NRF51/NRF51822/RNG/chconf.h index ed436251..1750f63c 100644 --- a/testhal/NRF51/NRF51822/RNG/chconf.h +++ b/testhal/NRF51/NRF51822/RNG/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2016 Stephane D'Alu + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,7 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -272,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -293,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -320,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -329,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -338,7 +483,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -348,7 +495,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. @@ -356,14 +505,18 @@ * * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_MASK) #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif /** * @brief Trace buffer entries. * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * different from @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) #define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -375,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -385,7 +540,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -396,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -407,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -416,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ diff --git a/testhal/NRF51/NRF51822/RNG/halconf_community.h b/testhal/NRF51/NRF51822/RNG/halconf_community.h index a85b95fd..e655bfc4 100644 --- a/testhal/NRF51/NRF51822/RNG/halconf_community.h +++ b/testhal/NRF51/NRF51822/RNG/halconf_community.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2016 Stéphane D'Alu + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,8 @@ limitations under the License. */ -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H /** * @brief Enables the community overlay. @@ -23,6 +23,7 @@ #if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) #define HAL_USE_COMMUNITY TRUE #endif + /** * @brief Enables the FSMC subsystem. */ @@ -52,19 +53,61 @@ #endif /** - * @brief Enables the community subsystem. + * @brief Enables the CRC subsystem. */ #if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) #define HAL_USE_CRC FALSE #endif /** - * @brief Enables the community subsystem. + * @brief Enables the RNG subsystem. */ #if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) #define HAL_USE_RNG TRUE #endif +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + /*===========================================================================*/ /* FSMCNAND driver related settings. */ /*===========================================================================*/ @@ -74,7 +117,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION FALSE +#define NAND_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -90,28 +133,41 @@ * @brief Enables search ROM feature. * @note Disabling this option saves both code and data space. */ -#define ONEWIRE_USE_SEARCH_ROM FALSE +#define ONEWIRE_USE_SEARCH_ROM TRUE /*===========================================================================*/ -/* CRC driver settings. */ +/* QEI driver related settings. */ /*===========================================================================*/ /** - * @brief Enables DMA engine when performing CRC transactions. - * @note Enabling this option also enables asynchronous API. + * @brief Enables discard of overlow */ -#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__) -#define CRC_USE_DMA FALSE +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE #endif /** - * @brief Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs. + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. * @note Disabling this option saves both code and data space. */ -#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define CRC_USE_MUTUAL_EXCLUSION FALSE -#endif +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE -#endif /* _HALCONF_COMMUNITY_H_ */ +#endif /* HALCONF_COMMUNITY_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/SPI/Makefile b/testhal/NRF51/NRF51822/SPI/Makefile index b04500e5..e0fa91b7 100644 --- a/testhal/NRF51/NRF51822/SPI/Makefile +++ b/testhal/NRF51/NRF51822/SPI/Makefile @@ -80,8 +80,10 @@ endif PROJECT = ch # Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -93,26 +95,20 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/test/rt/test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -135,11 +131,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/SPI/chconf.h b/testhal/NRF51/NRF51822/SPI/chconf.h index 49a050ac..1750f63c 100644 --- a/testhal/NRF51/NRF51822/SPI/chconf.h +++ b/testhal/NRF51/NRF51822/SPI/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2015 Stephen Caudle + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/SPI/halconf_community.h b/testhal/NRF51/NRF51822/SPI/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/SPI/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/NRF51/NRF51822/WDG/Makefile b/testhal/NRF51/NRF51822/WDG/Makefile index caa8b183..c096d274 100644 --- a/testhal/NRF51/NRF51822/WDG/Makefile +++ b/testhal/NRF51/NRF51822/WDG/Makefile @@ -83,6 +83,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk # HAL-OSAL files (optional). @@ -99,19 +101,13 @@ LDSCRIPT= $(STARTUPLD)/NRF51822.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -134,11 +130,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(CHIBIOS)/os/license +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/NRF51/NRF51822/WDG/chconf.h b/testhal/NRF51/NRF51822/WDG/chconf.h index 9952575b..1750f63c 100644 --- a/testhal/NRF51/NRF51822/WDG/chconf.h +++ b/testhal/NRF51/NRF51822/WDG/chconf.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2016 Stephane D'Alu + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,15 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -280,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -292,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -301,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -312,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -328,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -337,7 +472,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -346,7 +483,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -356,16 +495,28 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE TRUE +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -377,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -387,7 +540,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -398,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -409,6 +566,22 @@ */ /*===========================================================================*/ +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + /** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. @@ -418,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -430,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -468,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -477,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -520,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/NRF51/NRF51822/WDG/halconf_community.h b/testhal/NRF51/NRF51822/WDG/halconf_community.h new file mode 100644 index 00000000..43fdbf86 --- /dev/null +++ b/testhal/NRF51/NRF51822/WDG/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */