diff --git a/testhal/TIVA/TM4C123x/EXT/.cproject b/testhal/TIVA/TM4C123x/EXT/.cproject
deleted file mode 100644
index 5aa94c53..00000000
--- a/testhal/TIVA/TM4C123x/EXT/.cproject
+++ /dev/null
@@ -1,51 +0,0 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/testhal/TIVA/TM4C123x/EXT/.project b/testhal/TIVA/TM4C123x/EXT/.project
deleted file mode 100644
index c1e2c0f3..00000000
--- a/testhal/TIVA/TM4C123x/EXT/.project
+++ /dev/null
@@ -1,101 +0,0 @@
-
-
- TM4C123x-EXT
-
-
-
-
-
- org.eclipse.cdt.managedbuilder.core.genmakebuilder
- clean,full,incremental,
-
-
- ?name?
-
-
-
- org.eclipse.cdt.make.core.append_environment
- true
-
-
- org.eclipse.cdt.make.core.autoBuildTarget
- all
-
-
- org.eclipse.cdt.make.core.buildArguments
- -j1
-
-
- org.eclipse.cdt.make.core.buildCommand
- make
-
-
- org.eclipse.cdt.make.core.cleanBuildTarget
- clean
-
-
- org.eclipse.cdt.make.core.contents
- org.eclipse.cdt.make.core.activeConfigSettings
-
-
- org.eclipse.cdt.make.core.enableAutoBuild
- false
-
-
- org.eclipse.cdt.make.core.enableCleanBuild
- true
-
-
- org.eclipse.cdt.make.core.enableFullBuild
- true
-
-
- org.eclipse.cdt.make.core.fullBuildTarget
- all
-
-
- org.eclipse.cdt.make.core.stopOnError
- true
-
-
- org.eclipse.cdt.make.core.useDefaultBuildCmd
- true
-
-
-
-
- org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
- full,incremental,
-
-
-
-
-
- org.eclipse.cdt.core.cnature
- org.eclipse.cdt.managedbuilder.core.managedBuildNature
- org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
-
-
-
- board
- 2
- PARENT-1-CHIBIOS/ChibiOS-Contrib/os/hal/boards/TI_TM4C123G_LAUNCHPAD
-
-
- community_os
- 2
- PARENT-1-CHIBIOS/ChibiOS-Contrib/os
-
-
- os
- 2
- CHIBIOS/os
-
-
-
-
- CHIBIOS3
- file:/C:/ChibiStudio/chibios3
-
-
-
diff --git a/testhal/TIVA/TM4C123x/EXT/Makefile b/testhal/TIVA/TM4C123x/EXT/Makefile
deleted file mode 100644
index f2833ec2..00000000
--- a/testhal/TIVA/TM4C123x/EXT/Makefile
+++ /dev/null
@@ -1,218 +0,0 @@
-##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x400
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = hard
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk
-include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-# Other files (optional).
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m4
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
diff --git a/testhal/TIVA/TM4C123x/EXT/chconf.h b/testhal/TIVA/TM4C123x/EXT/chconf.h
deleted file mode 100644
index 7b3b83f2..00000000
--- a/testhal/TIVA/TM4C123x/EXT/chconf.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 10000
-
-/**
- * @brief Time intervals data size.
- * @note Allowed values are 16, 32 or 64 bits.
- */
-#define CH_CFG_INTERVALS_SIZE 32
-
-/**
- * @brief Time types data size.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_TIME_TYPES_SIZE 32
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM TRUE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_OBJ_FIFOS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- * kernel.
- *
- * @note The default is @p FALSE.
- */
-#define CH_CFG_USE_FACTORY TRUE
-
-/**
- * @brief Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- * pointer but this could have unintended side effects.
- */
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
-
-/**
- * @brief Enables the registry of generic objects.
- */
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-
-/**
- * @brief Enables factory for generic buffers.
- */
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-
-/**
- * @brief Enables factory for semaphores.
- */
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-
-/**
- * @brief Enables factory for mailboxes.
- */
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-
-/**
- * @brief Enables factory for objects FIFOs.
- */
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- * just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note It is invoked from within @p _thread_init() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch
deleted file mode 100644
index 0af6b448..00000000
--- a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch
+++ /dev/null
@@ -1,10 +0,0 @@
-
-
-
-
-
-
-
-
-
-
diff --git a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch b/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch
deleted file mode 100644
index d9636423..00000000
--- a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch
+++ /dev/null
@@ -1,52 +0,0 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/testhal/TIVA/TM4C123x/EXT/halconf.h b/testhal/TIVA/TM4C123x/EXT/halconf.h
deleted file mode 100644
index a6805313..00000000
--- a/testhal/TIVA/TM4C123x/EXT/halconf.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT TRUE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- * implementation for algorithms not supported by the underlying
- * hardware.
- * @note Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK FALSE
-#endif
-
-/**
- * @brief Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK FALSE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/testhal/TIVA/TM4C123x/EXT/main.c b/testhal/TIVA/TM4C123x/EXT/main.c
deleted file mode 100644
index 2326375b..00000000
--- a/testhal/TIVA/TM4C123x/EXT/main.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- Copyright (C) 2014..2017 Marco Veeneman
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static void extcb1(EXTDriver *extp, expchannel_t channel)
-{
- (void)extp;
- (void)channel;
-
- palToggleLine(LINE_LED_RED);
-}
-
-static void extcb2(EXTDriver *extp, expchannel_t channel)
-{
- (void)extp;
- (void)channel;
-
- palToggleLine(LINE_LED_GREEN);
-}
-
-static const EXTConfig extcfg =
-{
- {
- /* GPIOA */
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- /* GPIOB */
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- /* GPIOC */
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- /* GPIOD */
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- /* GPIOE */
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- /* GPIOF */
- {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL}
- }
-};
-
-/*
- * Application entry point.
- */
-int main(void)
-{
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- palSetLineMode(LINE_LED_RED, PAL_MODE_OUTPUT_PUSHPULL);
- palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
- palSetLineMode(LINE_SW1, PAL_MODE_INPUT_PULLUP);
- palSetLineMode(LINE_SW2, PAL_MODE_INPUT_PULLUP);
-
- extStart(&EXTD1, &extcfg);
-
- /*
- * Normal main() thread activity
- */
- while (TRUE) {
- chThdSleepMilliseconds(500);
- }
-
- return 0;
-}
diff --git a/testhal/TIVA/TM4C123x/EXT/mcuconf.h b/testhal/TIVA/TM4C123x/EXT/mcuconf.h
deleted file mode 100644
index e936c020..00000000
--- a/testhal/TIVA/TM4C123x/EXT/mcuconf.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- Copyright (C) 2014..2017 Marco Veeneman
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * TM4C123x drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 7...0 Lowest...Highest.
- */
-
-#define TM4C123x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO
-#define TIVA_MOSC_ENABLE TRUE
-#define TIVA_DIV400_VALUE 1
-#define TIVA_SYSDIV_VALUE 2
-#define TIVA_USESYSDIV_ENABLE FALSE
-#define TIVA_SYSDIV2LSB_ENABLE FALSE
-#define TIVA_BYPASS_VALUE 0
-#define TIVA_PWM_FIELDS (SYSCTL_RCC_USEPWMDIV | \
- SYSCTL_RCC_PWMDIV_8)
-
-/*
- * GPIO driver system settings.
- */
-#define TIVA_GPIO_GPIOA_USE_AHB TRUE
-#define TIVA_GPIO_GPIOB_USE_AHB TRUE
-#define TIVA_GPIO_GPIOC_USE_AHB TRUE
-#define TIVA_GPIO_GPIOD_USE_AHB TRUE
-#define TIVA_GPIO_GPIOE_USE_AHB TRUE
-#define TIVA_GPIO_GPIOF_USE_AHB TRUE
-
-/*
- * GPT driver system settings.
- */
-#define TIVA_GPT_USE_GPT0 FALSE
-#define TIVA_GPT_USE_GPT1 FALSE
-#define TIVA_GPT_USE_GPT2 FALSE
-#define TIVA_GPT_USE_GPT3 FALSE
-#define TIVA_GPT_USE_GPT4 FALSE
-#define TIVA_GPT_USE_GPT5 FALSE
-#define TIVA_GPT_USE_WGPT0 FALSE
-#define TIVA_GPT_USE_WGPT1 FALSE
-#define TIVA_GPT_USE_WGPT2 FALSE
-#define TIVA_GPT_USE_WGPT3 FALSE
-#define TIVA_GPT_USE_WGPT4 FALSE
-#define TIVA_GPT_USE_WGPT5 FALSE
-
-#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7
-#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7
-#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7
-#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7
-#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7
-#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7
-#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define TIVA_I2C_USE_I2C0 FALSE
-#define TIVA_I2C_USE_I2C1 FALSE
-#define TIVA_I2C_USE_I2C2 FALSE
-#define TIVA_I2C_USE_I2C3 FALSE
-#define TIVA_I2C_USE_I2C4 FALSE
-#define TIVA_I2C_USE_I2C5 FALSE
-#define TIVA_I2C_USE_I2C6 FALSE
-#define TIVA_I2C_USE_I2C7 FALSE
-#define TIVA_I2C_I2C0_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C1_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C2_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C3_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C4_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C5_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C6_IRQ_PRIORITY 4
-#define TIVA_I2C_I2C7_IRQ_PRIORITY 4
-
-/*
- * PWM driver system settings.
- */
-#define TIVA_PWM_USE_PWM0 FALSE
-#define TIVA_PWM_USE_PWM1 FALSE
-#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4
-#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4
-
-/*
- * SERIAL driver system settings.
- */
-#define TIVA_SERIAL_USE_UART0 FALSE
-#define TIVA_SERIAL_USE_UART1 FALSE
-#define TIVA_SERIAL_USE_UART2 FALSE
-#define TIVA_SERIAL_USE_UART3 FALSE
-#define TIVA_SERIAL_USE_UART4 FALSE
-#define TIVA_SERIAL_USE_UART5 FALSE
-#define TIVA_SERIAL_USE_UART6 FALSE
-#define TIVA_SERIAL_USE_UART7 FALSE
-#define TIVA_SERIAL_UART0_PRIORITY 5
-#define TIVA_SERIAL_UART1_PRIORITY 5
-#define TIVA_SERIAL_UART2_PRIORITY 5
-#define TIVA_SERIAL_UART3_PRIORITY 5
-#define TIVA_SERIAL_UART4_PRIORITY 5
-#define TIVA_SERIAL_UART5_PRIORITY 5
-#define TIVA_SERIAL_UART6_PRIORITY 5
-#define TIVA_SERIAL_UART7_PRIORITY 5
-
-/*
- * SPI driver system settings.
- */
-#define TIVA_SPI_USE_SSI0 TRUE
-#define TIVA_SPI_USE_SSI1 FALSE
-#define TIVA_SPI_USE_SSI2 FALSE
-#define TIVA_SPI_USE_SSI3 FALSE
-#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10
-#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24
-#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12
-#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14
-#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11
-#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25
-#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13
-#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15
-#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0
-#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0
-#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2
-#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2
-#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0
-#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0
-#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2
-#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2
-
-/*
- * ST driver system settings.
- */
-#define TIVA_ST_IRQ_PRIORITY 2
-#define TIVA_ST_USE_WIDE_TIMER TRUE
-#define TIVA_ST_TIMER_NUMBER 5
-#define TIVA_ST_TIMER_LETTER A