Add board files for SN32F260
This commit is contained in:
Adam Honse
Dimitris Mantzouranis
parent
36d503985f
commit
e2076e56b8
|
|
@ -0,0 +1,77 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if SN32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODE},
|
||||
#endif
|
||||
#if SN32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODE},
|
||||
#endif
|
||||
#if SN32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODE},
|
||||
#endif
|
||||
#if SN32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODE},
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
static int flag __attribute__((section(".flag"))) __attribute__((__used__)) = 0xAAAA5555;
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
sn32_clock_init();
|
||||
}
|
||||
|
||||
// void Reset_Handler(void) {
|
||||
// setPinOutput(C4);
|
||||
// setPinInputHigh(A0);
|
||||
// if (readPin(A0) == 0) {
|
||||
// asm ("mov %%sp, %0; bx %1;"
|
||||
// :
|
||||
// : "r"(0x200006C8), "r"(0x1fff0009)
|
||||
// : );
|
||||
// }
|
||||
// asm ("mov %%sp, %0; bx %1;"
|
||||
// :
|
||||
// : "r"(0x200006C8), "r"(0x7801)
|
||||
// : );
|
||||
// }
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
SN_SYS0->SWDCTRL_b.SWDDIS = 1; // Disable SWD
|
||||
}
|
||||
|
|
@ -0,0 +1,229 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
/*
|
||||
* Setup for Generic STM32_F303 Board
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_GENERIC_SN32_F260
|
||||
#define BOARD_NAME "SN32F260"
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define system_SN32F260
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_PIN0 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_PIN11 11U
|
||||
#define GPIOA_PIN12 12U
|
||||
#define GPIOA_PIN13 13U
|
||||
#define GPIOA_PIN14 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_PIN13 13U
|
||||
#define GPIOB_PIN14 14U
|
||||
#define GPIOB_PIN15 15U
|
||||
|
||||
#define GPIOC_PIN0 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_PIN6 6U
|
||||
#define GPIOC_PIN7 7U
|
||||
#define GPIOC_PIN8 8U
|
||||
#define GPIOC_PIN9 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_PIN14 14U
|
||||
#define GPIOC_PIN15 15U
|
||||
|
||||
// #define GPIOD_PIN0 0U
|
||||
// #define GPIOD_PIN1 1U
|
||||
// #define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
// #define GPIOD_PIN12 12U
|
||||
// #define GPIOD_PIN13 13U
|
||||
// #define GPIOD_PIN14 14U
|
||||
// #define GPIOD_PIN15 15U
|
||||
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
// #define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
|
||||
// #define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
// #define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOD, 5U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOD, 6U)
|
||||
|
||||
// #define LINE_PINB8 PAL_LINE(GPIOB, 8U)
|
||||
// #define LINE_PINB9 PAL_LINE(GPIOB, 9U)
|
||||
|
||||
#define LINE_CAPS_LOCK PAL_LINE(GPIOC, 8U)
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the SN32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n)))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n)))
|
||||
#define PIN_MODE_PULLUP(n) (0U << ((n*2)))
|
||||
#define PIN_MODE_SCHMITT_EN(n) (10U << ((n*2)))
|
||||
#define PIN_MODE_SCHMITT_DIS(n) (11U << ((n*2)))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - PIN0 (input pullup).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA11 - PIN10 (input pullup).
|
||||
* PA11 - PIN11 (input pullup).
|
||||
* PA12 - PIN12 (input pullup).
|
||||
* PA13 - PIN13 (input pullup).
|
||||
* PA14 - PIN14 (input pullup).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODE (PIN_MODE_INPUT(GPIOA_PIN0) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_PIN11) | PIN_MODE_INPUT(GPIOA_PIN12) | PIN_MODE_INPUT(GPIOA_PIN13) | PIN_MODE_INPUT(GPIOA_PIN14) | PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - PIN13 (input pullup).
|
||||
* PB14 - PIN14 (input pullup).
|
||||
* PB15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOB_MODE (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_OUTPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15))
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - PIN0 (input pullup).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - PIN6 (input pullup).
|
||||
* PC7 - PIN7 (input pullup).
|
||||
* PC8 - PIN8 (input pullup).
|
||||
* PC9 - PIN9 (input pullup).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - PIN14 (input pullup).
|
||||
* PC15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOC_MODE (PIN_MODE_INPUT(GPIOC_PIN0) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_PIN7) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_PIN14) | PIN_MODE_INPUT(GPIOC_PIN15))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD11 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODE (PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11))
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
# ifdef __cplusplus
|
||||
extern "C" {
|
||||
# endif
|
||||
void boardInit(void);
|
||||
# ifdef __cplusplus
|
||||
}
|
||||
# endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS_CONTRIB)/os/hal/boards/SN_SN32F260/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS_CONTRIB)/os/hal/boards/SN_SN32F260
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
Loading…
Reference in New Issue