commit
ee2031101c
|
@ -0,0 +1,219 @@
|
|||
##############################################################################
|
||||
# Build global options
|
||||
# NOTE: Can be overridden externally.
|
||||
#
|
||||
|
||||
# Compiler options here.
|
||||
ifeq ($(USE_OPT),)
|
||||
USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
|
||||
endif
|
||||
|
||||
# C specific options here (added to USE_OPT).
|
||||
ifeq ($(USE_COPT),)
|
||||
USE_COPT =
|
||||
endif
|
||||
|
||||
# C++ specific options here (added to USE_OPT).
|
||||
ifeq ($(USE_CPPOPT),)
|
||||
USE_CPPOPT = -fno-rtti
|
||||
endif
|
||||
|
||||
# Enable this if you want the linker to remove unused code and data
|
||||
ifeq ($(USE_LINK_GC),)
|
||||
USE_LINK_GC = yes
|
||||
endif
|
||||
|
||||
# Linker extra options here.
|
||||
ifeq ($(USE_LDOPT),)
|
||||
USE_LDOPT =
|
||||
endif
|
||||
|
||||
# Enable this if you want link time optimizations (LTO)
|
||||
ifeq ($(USE_LTO),)
|
||||
USE_LTO = yes
|
||||
endif
|
||||
|
||||
# If enabled, this option allows to compile the application in THUMB mode.
|
||||
ifeq ($(USE_THUMB),)
|
||||
USE_THUMB = yes
|
||||
endif
|
||||
|
||||
# Enable this if you want to see the full log while compiling.
|
||||
ifeq ($(USE_VERBOSE_COMPILE),)
|
||||
USE_VERBOSE_COMPILE = no
|
||||
endif
|
||||
|
||||
# If enabled, this option makes the build process faster by not compiling
|
||||
# modules not used in the current configuration.
|
||||
ifeq ($(USE_SMART_BUILD),)
|
||||
USE_SMART_BUILD = yes
|
||||
endif
|
||||
|
||||
#
|
||||
# Build global options
|
||||
##############################################################################
|
||||
|
||||
##############################################################################
|
||||
# Architecture or project specific options
|
||||
#
|
||||
|
||||
# Stack size to be allocated to the Cortex-M process stack. This stack is
|
||||
# the stack used by the main() thread.
|
||||
ifeq ($(USE_PROCESS_STACKSIZE),)
|
||||
USE_PROCESS_STACKSIZE = 0x400
|
||||
endif
|
||||
|
||||
# Stack size to the allocated to the Cortex-M main/exceptions stack. This
|
||||
# stack is used for processing interrupts and exceptions.
|
||||
ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
|
||||
USE_EXCEPTIONS_STACKSIZE = 0x400
|
||||
endif
|
||||
|
||||
# Enables the use of FPU (no, softfp, hard).
|
||||
ifeq ($(USE_FPU),)
|
||||
USE_FPU = no
|
||||
endif
|
||||
|
||||
#
|
||||
# Architecture or project specific options
|
||||
##############################################################################
|
||||
|
||||
##############################################################################
|
||||
# Project, sources and paths
|
||||
#
|
||||
|
||||
# Define project name here
|
||||
PROJECT = ch
|
||||
|
||||
# Imported source files and paths
|
||||
CHIBIOS = ../../../../ChibiOS-RT
|
||||
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
|
||||
# Startup files.
|
||||
include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
|
||||
# HAL-OSAL files (optional).
|
||||
include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
|
||||
include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F3xx/platform.mk
|
||||
include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk
|
||||
include $(CHIBIOS)/os/hal/osal/rt/osal.mk
|
||||
# RTOS files (optional).
|
||||
include $(CHIBIOS)/os/rt/rt.mk
|
||||
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
|
||||
# Other files (optional).
|
||||
|
||||
# Define linker script file here
|
||||
LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
|
||||
|
||||
# C sources that can be compiled in ARM or THUMB mode depending on the global
|
||||
# setting.
|
||||
CSRC = $(STARTUPSRC) \
|
||||
$(KERNSRC) \
|
||||
$(PORTSRC) \
|
||||
$(OSALSRC) \
|
||||
$(HALSRC) \
|
||||
$(PLATFORMSRC) \
|
||||
$(BOARDSRC) \
|
||||
$(TESTSRC) \
|
||||
$(CHIBIOS_CONTRIB)/os/various/pid.c \
|
||||
main.c
|
||||
|
||||
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
|
||||
# setting.
|
||||
CPPSRC =
|
||||
|
||||
# C sources to be compiled in ARM mode regardless of the global setting.
|
||||
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
||||
# option that results in lower performance and larger code size.
|
||||
ACSRC =
|
||||
|
||||
# C++ sources to be compiled in ARM mode regardless of the global setting.
|
||||
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
||||
# option that results in lower performance and larger code size.
|
||||
ACPPSRC =
|
||||
|
||||
# C sources to be compiled in THUMB mode regardless of the global setting.
|
||||
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
||||
# option that results in lower performance and larger code size.
|
||||
TCSRC =
|
||||
|
||||
# C sources to be compiled in THUMB mode regardless of the global setting.
|
||||
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
||||
# option that results in lower performance and larger code size.
|
||||
TCPPSRC =
|
||||
|
||||
# List ASM source files here
|
||||
ASMSRC =
|
||||
ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
|
||||
|
||||
INCDIR = $(CHIBIOS)/os/license \
|
||||
$(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
|
||||
$(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
|
||||
$(CHIBIOS_CONTRIB)/os/various
|
||||
|
||||
#
|
||||
# Project, sources and paths
|
||||
##############################################################################
|
||||
|
||||
##############################################################################
|
||||
# Compiler settings
|
||||
#
|
||||
|
||||
MCU = cortex-m4
|
||||
|
||||
#TRGT = arm-elf-
|
||||
TRGT = arm-none-eabi-
|
||||
CC = $(TRGT)gcc
|
||||
CPPC = $(TRGT)g++
|
||||
# Enable loading with g++ only if you need C++ runtime support.
|
||||
# NOTE: You can use C++ even without C++ support if you are careful. C++
|
||||
# runtime support makes code size explode.
|
||||
LD = $(TRGT)gcc
|
||||
#LD = $(TRGT)g++
|
||||
CP = $(TRGT)objcopy
|
||||
AS = $(TRGT)gcc -x assembler-with-cpp
|
||||
AR = $(TRGT)ar
|
||||
OD = $(TRGT)objdump
|
||||
SZ = $(TRGT)size
|
||||
HEX = $(CP) -O ihex
|
||||
BIN = $(CP) -O binary
|
||||
|
||||
# ARM-specific options here
|
||||
AOPT =
|
||||
|
||||
# THUMB-specific options here
|
||||
TOPT = -mthumb -DTHUMB
|
||||
|
||||
# Define C warning options here
|
||||
CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
|
||||
|
||||
# Define C++ warning options here
|
||||
CPPWARN = -Wall -Wextra -Wundef
|
||||
|
||||
#
|
||||
# Compiler settings
|
||||
##############################################################################
|
||||
|
||||
##############################################################################
|
||||
# Start of user section
|
||||
#
|
||||
|
||||
# List all user C define here, like -D_DEBUG=1
|
||||
UDEFS =
|
||||
|
||||
# Define ASM defines here
|
||||
UADEFS =
|
||||
|
||||
# List all user directories here
|
||||
UINCDIR =
|
||||
|
||||
# List the user directory to look for the libraries here
|
||||
ULIBDIR =
|
||||
|
||||
# List all user libraries here
|
||||
ULIBS =
|
||||
|
||||
#
|
||||
# End of user defines
|
||||
##############################################################################
|
||||
|
||||
RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
|
||||
include $(RULESPATH)/rules.mk
|
|
@ -0,0 +1,608 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_5_0_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
|
||||
/**
|
||||
* @brief Time intervals data size.
|
||||
* @note Allowed values are 16, 32 or 64 bits.
|
||||
*/
|
||||
#define CH_CFG_INTERVALS_SIZE 32
|
||||
|
||||
/**
|
||||
* @brief Time types data size.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_TIME_TYPES_SIZE 32
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP TRUE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS TRUE
|
||||
|
||||
/**
|
||||
* @brief Objects FIFOs APIs.
|
||||
* @details If enabled then the objects FIFOs APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_OBJ_FIFOS TRUE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Objects factory options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Objects Factory APIs.
|
||||
* @details If enabled then the objects factory APIs are included in the
|
||||
* kernel.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_CFG_USE_FACTORY TRUE
|
||||
|
||||
/**
|
||||
* @brief Maximum length for object names.
|
||||
* @details If the specified length is zero then the name is stored by
|
||||
* pointer but this could have unintended side effects.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
|
||||
|
||||
/**
|
||||
* @brief Enables the registry of generic objects.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables factory for generic buffers.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables factory for semaphores.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables factory for mailboxes.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables factory for objects FIFOs.
|
||||
*/
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System structure extension.
|
||||
* @details User fields added to the end of the @p ch_system_t structure.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief System initialization hook.
|
||||
* @details User initialization code added to the @p chSysInit() function
|
||||
* just before interrupts are enabled globally.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p _thread_init() function.
|
||||
*
|
||||
* @note It is invoked from within @p _thread_init() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
|
@ -0,0 +1,419 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the cryptographic subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the QSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_QSPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CRY driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the SW fall-back of the cryptographic driver.
|
||||
* @details When enabled, this option, activates a fall-back software
|
||||
* implementation for algorithms not supported by the underlying
|
||||
* hardware.
|
||||
* @note Fall-back implementations may not be present for all algorithms.
|
||||
*/
|
||||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_USE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Makes the driver forcibly use the fall-back implementations.
|
||||
*/
|
||||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_ENFORCE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 256
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
#include "halconf_community.h"
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
|
@ -0,0 +1,173 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_COMMUNITY_H
|
||||
#define HALCONF_COMMUNITY_H
|
||||
|
||||
/**
|
||||
* @brief Enables the community overlay.
|
||||
*/
|
||||
#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_COMMUNITY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the FSMC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_FSMC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the NAND subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_NAND FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the 1-wire subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ONEWIRE FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CRC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CRC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RNG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RNG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EEPROM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EEPROM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the TIMCAP subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_TIMCAP FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the TIMCAP subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_COMP FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the QEI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_QEI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USBH subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USBH FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB_MSD subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB_MSD FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* FSMCNAND driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define NAND_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* 1-wire driver related settings. */
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @brief Enables strong pull up feature.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#define ONEWIRE_USE_STRONG_PULLUP FALSE
|
||||
|
||||
/**
|
||||
* @brief Enables search ROM feature.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#define ONEWIRE_USE_SEARCH_ROM TRUE
|
||||
|
||||
/*===========================================================================*/
|
||||
/* QEI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables discard of overlow
|
||||
*/
|
||||
#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
|
||||
#define QEI_USE_OVERFLOW_DISCARD FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables min max of overlow
|
||||
*/
|
||||
#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
|
||||
#define QEI_USE_OVERFLOW_MINMAX FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* EEProm driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables 24xx series I2C eeprom device driver.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#define EEPROM_USE_EE24XX FALSE
|
||||
/**
|
||||
* @brief Enables 25xx series SPI eeprom device driver.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#define EEPROM_USE_EE25XX FALSE
|
||||
|
||||
#endif /* HALCONF_COMMUNITY_H */
|
||||
|
||||
/** @} */
|
|
@ -0,0 +1,171 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
#include "pid.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
#define STM32_UUID ((uint32_t *)0x1FFFF7AC)
|
||||
#define ADC_GRP1_NUM_CHANNELS 1
|
||||
#define ADC_GRP1_BUF_DEPTH 8
|
||||
|
||||
static pid_t pid;
|
||||
static float input = 0, output = 0, target = 0;
|
||||
static adcsample_t samples[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH];
|
||||
|
||||
/*
|
||||
* ADC streaming callback.
|
||||
*/
|
||||
static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
|
||||
|
||||
(void)adcp;
|
||||
(void)n;
|
||||
uint32_t i, tmp = 0;
|
||||
if (samples == buffer) {
|
||||
|
||||
for (i = 0; i < n; i++) {
|
||||
tmp += buffer[i];
|
||||
}
|
||||
input = tmp / n;
|
||||
|
||||
if (input <= target) {
|
||||
palClearLine(LINE_LED7_GREEN);
|
||||
palSetLine(LINE_LED6_GREEN);
|
||||
}
|
||||
else {
|
||||
palClearLine(LINE_LED6_GREEN);
|
||||
palSetLine(LINE_LED7_GREEN);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* ADC conversion group.
|
||||
* Mode: Linear buffer, 8 samples of 2 channels, SW triggered.
|
||||
* Channels: IN0, IN8.
|
||||
*/
|
||||
static const ADCConversionGroup adcgrpcfg1 = {
|
||||
TRUE,
|
||||
ADC_GRP1_NUM_CHANNELS,
|
||||
adccallback,
|
||||
NULL,
|
||||
ADC_CFGR_CONT, /* CFGR */
|
||||
ADC_TR(0, 4095), /* TR1 */
|
||||
{ /* SMPR[2] */
|
||||
ADC_SMPR1_SMP_AN1(ADC_SMPR_SMP_181P5),
|
||||
0
|
||||
},
|
||||
{ /* SQR[4] */
|
||||
ADC_SQR1_SQ1_N(ADC_CHANNEL_IN1),
|
||||
0,
|
||||
0,
|
||||
0
|
||||
}
|
||||
};
|
||||
|
||||
static const DACConfig dac1cfg1 = {
|
||||
.init = 2047U,
|
||||
.datamode = DAC_DHRM_12BIT_RIGHT,
|
||||
.cr = 0
|
||||
};
|
||||
|
||||
static void gptcb(GPTDriver *drv) {
|
||||
|
||||
(void)drv;
|
||||
pid_compute(&pid);
|
||||
dacPutChannelX(&DACD1, 0, (dacsample_t)output);
|
||||
}
|
||||
|
||||
/*
|
||||
* GPT6 configuration.
|
||||
*/
|
||||
static const GPTConfig gpt6cfg1 = {
|
||||
.frequency = 10000U, // 10 KHz
|
||||
.callback = gptcb,
|
||||
.cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
|
||||
.dier = 0U
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* Red LEDs blinker thread, times are in milliseconds.
|
||||
*/
|
||||
static THD_WORKING_AREA(waThread1, 128);
|
||||
static THD_FUNCTION(Thread1, arg) {
|
||||
|
||||
srand(osalOsGetSystemTimeX() + STM32_UUID[0]);
|
||||
|
||||
(void)arg;
|
||||
chRegSetThreadName("blinker");
|
||||
while (true) {
|
||||
palToggleLine(LINE_LED10_RED);
|
||||
chThdSleepMilliseconds(500);
|
||||
|
||||
target = 1000 + (rand() % 2500); // Change the PID target every 500ms.
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Application entry point.
|
||||
*/
|
||||
int main(void) {
|
||||
|
||||
halInit();
|
||||
chSysInit();
|
||||
|
||||
/*
|
||||
* Set PA0 PA3 PA4 to Analog (ADC1_CH2, DAC1_CH1)
|
||||
* You will have to connect these with a jumper wire
|
||||
*/
|
||||
palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_ANALOG);
|
||||
|
||||
/*
|
||||
* Start peripherals
|
||||
*/
|
||||
adcStart(&ADCD1, NULL);
|
||||
dacStart(&DACD1, &dac1cfg1);
|
||||
gptStart(&GPTD6, &gpt6cfg1);
|
||||
|
||||
/*
|
||||
* Start PID
|
||||
*/
|
||||
pid_create(&pid, &input, &output, &target, 1.0, 1.0, 1.0, PID_ON_M, PID_DIRECT);
|
||||
pid_setOutputLimits(&pid, 0.0, 4095.0); // Max DAC range
|
||||
pid_setSampleTime(&pid, 10);
|
||||
pid_setMode(&pid, PID_AUTOMATIC);
|
||||
|
||||
/*
|
||||
* Starting a continuous conversion.
|
||||
*/
|
||||
gptStartContinuous(&GPTD6, 101U); // 10000 / 101
|
||||
adcStartConversion(&ADCD1, &adcgrpcfg1, samples, ADC_GRP1_BUF_DEPTH);
|
||||
|
||||
/*
|
||||
* Creates the blinker thread.
|
||||
*/
|
||||
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
|
||||
|
||||
/*
|
||||
* Normal main() thread activity.
|
||||
*/
|
||||
while (true) {
|
||||
chThdSleepMilliseconds(250);
|
||||
palToggleLine(LINE_LED3_RED);
|
||||
}
|
||||
return 0;
|
||||
}
|
|
@ -0,0 +1,255 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F3xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F3xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
|
||||
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_USART2SW STM32_USART2SW_PCLK
|
||||
#define STM32_USART3SW STM32_USART3SW_PCLK
|
||||
#define STM32_UART4SW STM32_UART4SW_PCLK
|
||||
#define STM32_UART5SW STM32_UART5SW_PCLK
|
||||
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
|
||||
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
|
||||
#define STM32_TIM1SW STM32_TIM1SW_PCLK2
|
||||
#define STM32_TIM8SW STM32_TIM8SW_PCLK2
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI16_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 TRUE
|
||||
#define STM32_ADC_USE_ADC2 TRUE
|
||||
#define STM32_ADC_USE_ADC3 TRUE
|
||||
#define STM32_ADC_USE_ADC4 TRUE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC4_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 TRUE
|
||||
#define STM32_DAC_USE_DAC1_CH2 TRUE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM6 TRUE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 FALSE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#include "mcuconf_community.h"
|
||||
|
||||
#endif /* MCUCONF_H */
|
|
@ -0,0 +1,155 @@
|
|||
/*
|
||||
ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* FSMC driver system settings.
|
||||
*/
|
||||
#define STM32_FSMC_USE_FSMC1 FALSE
|
||||
#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10
|
||||
|
||||
/*
|
||||
* FSMC NAND driver system settings.
|
||||
*/
|
||||
#define STM32_NAND_USE_FSMC_NAND1 FALSE
|
||||
#define STM32_NAND_USE_FSMC_NAND2 FALSE
|
||||
#define STM32_NAND_USE_EXT_INT FALSE
|
||||
#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_NAND_DMA_PRIORITY 0
|
||||
#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* FSMC SRAM driver system settings.
|
||||
*/
|
||||
#define STM32_USE_FSMC_SRAM FALSE
|
||||
#define STM32_SRAM_USE_FSMC_SRAM1 FALSE
|
||||
#define STM32_SRAM_USE_FSMC_SRAM2 FALSE
|
||||
#define STM32_SRAM_USE_FSMC_SRAM3 FALSE
|
||||
#define STM32_SRAM_USE_FSMC_SRAM4 FALSE
|
||||
|
||||
/*
|
||||
* FSMC SDRAM driver system settings.
|
||||
*/
|
||||
#define STM32_USE_FSMC_SDRAM FALSE
|
||||
|
||||
/*
|
||||
* TIMCAP driver system settings.
|
||||
*/
|
||||
#define STM32_TIMCAP_USE_TIM1 TRUE
|
||||
#define STM32_TIMCAP_USE_TIM2 FALSE
|
||||
#define STM32_TIMCAP_USE_TIM3 TRUE
|
||||
#define STM32_TIMCAP_USE_TIM4 TRUE
|
||||
#define STM32_TIMCAP_USE_TIM5 TRUE
|
||||
#define STM32_TIMCAP_USE_TIM8 TRUE
|
||||
#define STM32_TIMCAP_USE_TIM9 TRUE
|
||||
#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3
|
||||
#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* COMP driver system settings.
|
||||
*/
|
||||
#define STM32_COMP_USE_COMP1 TRUE
|
||||
#define STM32_COMP_USE_COMP2 TRUE
|
||||
#define STM32_COMP_USE_COMP3 TRUE
|
||||
#define STM32_COMP_USE_COMP4 TRUE
|
||||
#define STM32_COMP_USE_COMP5 TRUE
|
||||
#define STM32_COMP_USE_COMP6 TRUE
|
||||
#define STM32_COMP_USE_COMP7 TRUE
|
||||
|
||||
#define STM32_COMP_USE_INTERRUPTS TRUE
|
||||
#define STM32_COMP_1_2_3_IRQ_PRIORITY 5
|
||||
#define STM32_COMP_4_5_6_IRQ_PRIORITY 5
|
||||
#define STM32_COMP_7_IRQ_PRIORITY 5
|
||||
|
||||
#if STM32_COMP_USE_INTERRUPTS
|
||||
#define STM32_DISABLE_EXTI21_22_29_HANDLER
|
||||
#define STM32_DISABLE_EXTI30_32_HANDLER
|
||||
#define STM32_DISABLE_EXTI33_HANDLER
|
||||
#endif
|
||||
|
||||
/*
|
||||
* USBH driver system settings.
|
||||
*/
|
||||
#define STM32_OTG1_CHANNELS_NUMBER 8
|
||||
#define STM32_OTG2_CHANNELS_NUMBER 12
|
||||
|
||||
#define STM32_USBH_USE_OTG1 1
|
||||
#define STM32_OTG1_RXFIFO_SIZE 1024
|
||||
#define STM32_OTG1_PTXFIFO_SIZE 128
|
||||
#define STM32_OTG1_NPTXFIFO_SIZE 128
|
||||
|
||||
#define STM32_USBH_USE_OTG2 0
|
||||
#define STM32_OTG2_RXFIFO_SIZE 2048
|
||||
#define STM32_OTG2_PTXFIFO_SIZE 1024
|
||||
#define STM32_OTG2_NPTXFIFO_SIZE 1024
|
||||
|
||||
#define STM32_USBH_MIN_QSPACE 4
|
||||
#define STM32_USBH_CHANNELS_NP 4
|
||||
|
||||
/*
|
||||
* CRC driver system settings.
|
||||
*/
|
||||
#define STM32_CRC_USE_CRC1 TRUE
|
||||
#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1
|
||||
#define STM32_CRC_CRC1_DMA_PRIORITY 2
|
||||
#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2
|
||||
|
||||
#define CRCSW_USE_CRC1 FALSE
|
||||
#define CRCSW_CRC32_TABLE TRUE
|
||||
#define CRCSW_CRC16_TABLE TRUE
|
||||
#define CRCSW_PROGRAMMABLE TRUE
|
||||
|
||||
/*
|
||||
* EICU driver system settings.
|
||||
*/
|
||||
#define STM32_EICU_USE_TIM1 TRUE
|
||||
#define STM32_EICU_USE_TIM2 FALSE
|
||||
#define STM32_EICU_USE_TIM3 TRUE
|
||||
#define STM32_EICU_USE_TIM4 TRUE
|
||||
#define STM32_EICU_USE_TIM5 TRUE
|
||||
#define STM32_EICU_USE_TIM8 TRUE
|
||||
#define STM32_EICU_USE_TIM9 TRUE
|
||||
#define STM32_EICU_USE_TIM10 TRUE
|
||||
#define STM32_EICU_USE_TIM11 TRUE
|
||||
#define STM32_EICU_USE_TIM12 TRUE
|
||||
#define STM32_EICU_USE_TIM13 TRUE
|
||||
#define STM32_EICU_USE_TIM14 TRUE
|
||||
#define STM32_EICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM8_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM9_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM10_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM11_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM12_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM13_IRQ_PRIORITY 7
|
||||
#define STM32_EICU_TIM14_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* QEI driver system settings.
|
||||
*/
|
||||
#define STM32_QEI_USE_TIM1 TRUE
|
||||
#define STM32_QEI_USE_TIM2 FALSE
|
||||
#define STM32_QEI_USE_TIM3 TRUE
|
||||
#define STM32_QEI_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_QEI_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_QEI_TIM3_IRQ_PRIORITY 3
|
|
@ -0,0 +1,194 @@
|
|||
/**********************************************************************************************
|
||||
* Arduino PID Library - Version 1.2.1
|
||||
* by Brett Beauregard <br3ttb@gmail.com> brettbeauregard.com
|
||||
* Modified by Fabien Poussin <fabien.poussin@gmail.com> for ChibiOS.
|
||||
*
|
||||
* This Library is licensed under the MIT License
|
||||
**********************************************************************************************/
|
||||
|
||||
#include "pid.h"
|
||||
#include "osal.h"
|
||||
|
||||
#define TIME_MS ((osalOsGetSystemTimeX() * 1000) / OSAL_ST_FREQUENCY )
|
||||
|
||||
/*Constructor (...)*********************************************************
|
||||
* The parameters specified here are those for for which we can't set up
|
||||
* reliable defaults, so we need to have the user set them.
|
||||
***************************************************************************/
|
||||
void pid_create(pidc_t* p, float* Input, float* Output, float* Setpoint,
|
||||
float Kp, float Ki, float Kd, int POn, int Direction)
|
||||
{
|
||||
p->output = Output;
|
||||
p->input = Input;
|
||||
p->setPoint = Setpoint;
|
||||
p->inAuto = false;
|
||||
|
||||
pid_setOutputLimits(p, 0, 4095); // default output limit corresponds to
|
||||
// the 12 bit dac limit
|
||||
|
||||
p->sampleTime = 100; // default Controller Sample Time is 100ms
|
||||
|
||||
pid_setDirection(p, Direction);
|
||||
pid_setTunings(p, Kp, Ki, Kd, POn);
|
||||
pid_initialize(p);
|
||||
|
||||
p->lastTime = TIME_MS - p->sampleTime;
|
||||
}
|
||||
|
||||
|
||||
/* Compute() **********************************************************************
|
||||
* This, as they say, is where the magic happens. this function should be called
|
||||
* every time "void loop()" executes. the function will decide for itself whether a new
|
||||
* pid Output needs to be computed. returns true when the output is computed,
|
||||
* false when nothing has been done.
|
||||
**********************************************************************************/
|
||||
bool pid_compute(pidc_t* p)
|
||||
{
|
||||
if(!p->inAuto) return false;
|
||||
unsigned long now = TIME_MS;
|
||||
unsigned long timeChange = (now - p->lastTime);
|
||||
if(timeChange >= p->sampleTime)
|
||||
{
|
||||
/* Compute all the working error variables */
|
||||
float input = *p->input;
|
||||
float error = *p->setPoint - input;
|
||||
float dInput = (input - p->lastInput);
|
||||
p->outputSum += (p->ki * error);
|
||||
|
||||
/* Add Proportional on Measurement, if PID_ON_M is specified */
|
||||
if(!p->pOnE) p->outputSum -= p->kp * dInput;
|
||||
|
||||
if(p->outputSum > p->outMax) p->outputSum = p->outMax;
|
||||
else if(p->outputSum < p->outMin) p->outputSum = p->outMin;
|
||||
|
||||
/* Add Proportional on Error, if P_ON_E is specified */
|
||||
float output;
|
||||
if(p->pOnE) output = p->kp * error;
|
||||
else output = 0;
|
||||
|
||||
/* Compute Rest of PID Output */
|
||||
output += p->outputSum - p->kd * dInput;
|
||||
|
||||
if(output > p->outMax) output = p->outMax;
|
||||
else if(output < p->outMin) output = p->outMin;
|
||||
*p->output = output;
|
||||
|
||||
/* Remember some variables for next time */
|
||||
p->lastInput = input;
|
||||
p->lastTime = now;
|
||||
return true;
|
||||
}
|
||||
else return false;
|
||||
}
|
||||
|
||||
/* SetTunings(...)*************************************************************
|
||||
* This function allows the controller's dynamic performance to be adjusted.
|
||||
* it's called automatically from the constructor, but tunings can also
|
||||
* be adjusted on the fly during normal operation
|
||||
******************************************************************************/
|
||||
void pid_setTunings(pidc_t* p, float Kp, float Ki, float Kd, int POn)
|
||||
{
|
||||
if (Kp < 0 || Ki < 0 || Kd < 0) return;
|
||||
|
||||
p->pOn = POn;
|
||||
p->pOnE = POn == PID_ON_E;
|
||||
|
||||
p->dispKp = Kp;
|
||||
p->dispKi = Ki;
|
||||
p->dispKd = Kd;
|
||||
|
||||
float SampleTimeInSec = ((float)p->sampleTime) / 1000.0;
|
||||
p->kp = Kp;
|
||||
p->ki = Ki * SampleTimeInSec;
|
||||
p->kd = Kd / SampleTimeInSec;
|
||||
|
||||
if(p->direction == PID_REVERSE)
|
||||
{
|
||||
p->kp = (0 - p->kp);
|
||||
p->ki = (0 - p->ki);
|
||||
p->kd = (0 - p->kd);
|
||||
}
|
||||
}
|
||||
|
||||
/* SetSampleTime(...) *********************************************************
|
||||
* sets the period, in Milliseconds, at which the calculation is performed
|
||||
******************************************************************************/
|
||||
void pid_setSampleTime(pidc_t* p, int NewSampleTime)
|
||||
{
|
||||
if (NewSampleTime > 0)
|
||||
{
|
||||
float ratio = (float)NewSampleTime / (float)p->sampleTime;
|
||||
p->ki *= ratio;
|
||||
p->kd /= ratio;
|
||||
p->sampleTime = (unsigned long)NewSampleTime;
|
||||
}
|
||||
}
|
||||
|
||||
/* SetOutputLimits(...)****************************************************
|
||||
* This function will be used far more often than SetInputLimits. while
|
||||
* the input to the controller will generally be in the 0-1023 range (which is
|
||||
* the default already,) the output will be a little different. maybe they'll
|
||||
* be doing a time window and will need 0-8000 or something. or maybe they'll
|
||||
* want to clamp it from 0-125. who knows. at any rate, that can all be done
|
||||
* here.
|
||||
**************************************************************************/
|
||||
void pid_setOutputLimits(pidc_t* p, float Min, float Max)
|
||||
{
|
||||
if(Min >= Max) return;
|
||||
p->outMin = Min;
|
||||
p->outMax = Max;
|
||||
|
||||
if(p->inAuto)
|
||||
{
|
||||
if(*p->output > p->outMax) *p->output = p->outMax;
|
||||
else if(*p->output < p->outMin) *p->output = p->outMin;
|
||||
|
||||
if(p->outputSum > p->outMax) p->outputSum = p->outMax;
|
||||
else if(p->outputSum < p->outMin) p->outputSum = p->outMin;
|
||||
}
|
||||
}
|
||||
|
||||
/* SetMode(...)****************************************************************
|
||||
* Allows the controller Mode to be set to manual (0) or Automatic (non-zero)
|
||||
* when the transition from manual to auto occurs, the controller is
|
||||
* automatically initialized
|
||||
******************************************************************************/
|
||||
void pid_setMode(pidc_t* p, int Mode)
|
||||
{
|
||||
bool newAuto = (Mode == PID_AUTOMATIC);
|
||||
if(newAuto && !p->inAuto)
|
||||
{ /* we just went from manual to auto */
|
||||
pid_initialize(p);
|
||||
}
|
||||
p->inAuto = newAuto;
|
||||
}
|
||||
|
||||
/* Initialize()****************************************************************
|
||||
* does all the things that need to happen to ensure a bumpless transfer
|
||||
* from manual to automatic mode.
|
||||
******************************************************************************/
|
||||
void pid_initialize(pidc_t* p)
|
||||
{
|
||||
p->outputSum = *p->output;
|
||||
p->lastInput = *p->input;
|
||||
if(p->outputSum > p->outMax) p->outputSum = p->outMax;
|
||||
else if(p->outputSum < p->outMin) p->outputSum = p->outMin;
|
||||
}
|
||||
|
||||
/* SetControllerDirection(...)*************************************************
|
||||
* The PID will either be connected to a DIRECT acting process (+Output leads
|
||||
* to +Input) or a REVERSE acting process(+Output leads to -Input.) we need to
|
||||
* know which one, because otherwise we may increase the output when we should
|
||||
* be decreasing. This is called from the constructor.
|
||||
******************************************************************************/
|
||||
void pid_setDirection(pidc_t* p, int Direction)
|
||||
{
|
||||
if(p->inAuto && Direction != p->direction)
|
||||
{
|
||||
p->kp = (0 - p->kp);
|
||||
p->ki = (0 - p->ki);
|
||||
p->kd = (0 - p->kd);
|
||||
}
|
||||
p->direction = Direction;
|
||||
}
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
#ifndef PID_h
|
||||
#define PID_h
|
||||
|
||||
#include "chtypes.h"
|
||||
|
||||
//Constants used in some of the functions below
|
||||
#define PID_AUTOMATIC 1
|
||||
#define PID_MANUAL 0
|
||||
#define PID_DIRECT 0
|
||||
#define PID_REVERSE 1
|
||||
#define PID_ON_M 0
|
||||
#define PID_ON_E 1
|
||||
|
||||
|
||||
typedef struct {
|
||||
|
||||
float kp; // * (P)roportional Tuning Parameter
|
||||
float ki; // * (I)ntegral Tuning Parameter
|
||||
float kd; // * (D)erivative Tuning Parameter
|
||||
|
||||
float dispKp; // * we'll hold on to the tuning parameters in user-entered
|
||||
float dispKi; // format for display purposes
|
||||
float dispKd; //
|
||||
|
||||
int direction;
|
||||
int pOn;
|
||||
|
||||
float *input; // * Pointers to the Input, Output, and Setpoint variables
|
||||
float *output; // This creates a hard link between the variables and the
|
||||
float *setPoint; // PID, freeing the user from having to constantly tell us
|
||||
// what these values are. with pointers we'll just know.
|
||||
unsigned long lastTime;
|
||||
float outputSum;
|
||||
float lastInput;
|
||||
|
||||
unsigned long sampleTime;
|
||||
float outMin;
|
||||
float outMax;
|
||||
|
||||
bool inAuto;
|
||||
bool pOnE;
|
||||
|
||||
} pidc_t;
|
||||
|
||||
|
||||
//commonly used functions **************************************************************************
|
||||
void pid_create(pidc_t* p, float* Input, float* Output, float* Setpoint, // * constructor. links the PID to the Input, Output, and
|
||||
float Kp, float Ki, float Kd, int POn, int Direction); // Setpoint. Initial tuning parameters are also set here.
|
||||
// (overload for specifying proportional mode)
|
||||
|
||||
void pid_setMode(pidc_t* p, int mode); // * sets PID to either Manual (0) or Auto (non-0)
|
||||
|
||||
bool pid_compute(pidc_t* p); // * performs the PID calculation. it should be
|
||||
// called every time loop() cycles. ON/OFF and
|
||||
// calculation frequency can be set using SetMode
|
||||
// SetsampleTime respectively
|
||||
|
||||
void pid_setOutputLimits(pidc_t* p, float Min, float Max); // * clamps the output to a specific range. 0-255 by default, but
|
||||
// it's likely the user will want to change this depending on
|
||||
// the application
|
||||
|
||||
|
||||
|
||||
//available but not commonly used functions ********************************************************
|
||||
void pid_setTunings(pidc_t* p, float Kp, float Ki, float Kd, int POn); // * While most users will set the tunings once in the
|
||||
// constructor, this function gives the user the option
|
||||
// of changing tunings during runtime for Adaptive control
|
||||
|
||||
void pid_setDirection(pidc_t* p, int Direction); // * Sets the Direction, or "Action" of the controller. DIRECT
|
||||
// means the output will increase when error is positive. REVERSE
|
||||
// means the opposite. it's very unlikely that this will be needed
|
||||
// once it is set in the constructor.
|
||||
void pid_setSampleTime(pidc_t* p, int NewSampleTime); // * sets the frequency, in Milliseconds, with which
|
||||
// the PID calculation is performed. default is 100
|
||||
|
||||
void pid_initialize(pidc_t* p);
|
||||
|
||||
#endif
|
Loading…
Reference in New Issue