diff --git a/demos/rt/RT-SPC56EL-EVB/.cproject b/demos/rt/RT-SPC56EL-EVB/.cproject
new file mode 100644
index 000000000..ac5bc86e0
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/.cproject
@@ -0,0 +1,52 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/demos/rt/RT-SPC56EL-EVB/.project b/demos/rt/RT-SPC56EL-EVB/.project
new file mode 100644
index 000000000..ed857f02f
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/.project
@@ -0,0 +1,43 @@
+
+
+ RT-SPC56EL-EVB
+
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.genmakebuilder
+ clean,full,incremental,
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
+ full,incremental,
+
+
+
+
+
+ org.eclipse.cdt.core.cnature
+ org.eclipse.cdt.managedbuilder.core.managedBuildNature
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
+
+
+
+ board
+ 2
+ CHIBIOS/os/hal/boards/ST_EVB_SPC56EL
+
+
+ os
+ 2
+ CHIBIOS/os
+
+
+ test
+ 2
+ CHIBIOS/test
+
+
+
diff --git a/demos/rt/RT-SPC56EL-EVB/Makefile b/demos/rt/RT-SPC56EL-EVB/Makefile
new file mode 100644
index 000000000..def793d89
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/Makefile
@@ -0,0 +1,167 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+ USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC56EL/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC56ELxx/platform.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/osal/osal.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port_spc56elxx.mk
+include $(CHIBIOS)/test/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(PORTLD)/SPC56EL60_LSM.ld
+
+# C sources here.
+CSRC = $(PORTSRC) \
+ $(KERNSRC) \
+ $(TESTSRC) \
+ $(HALSRC) \
+ $(OSALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(PORTASM)
+
+INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+MOT = $(CP) -O srec
+BIN = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/demos/rt/RT-SPC56EL-EVB/chconf.h b/demos/rt/RT-SPC56EL-EVB/chconf.h
new file mode 100644
index 000000000..f39b88d23
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/chconf.h
@@ -0,0 +1,495 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/**
+ * @brief Realtime Counter frequency.
+ * @details Frequency of the system counter used for realtime delays and
+ * measurements.
+ */
+#define CH_CFG_RTC_FREQUENCY 120000000
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop. */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE FALSE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/demos/rt/RT-SPC56EL-EVB/halconf.h b/demos/rt/RT-SPC56EL-EVB/halconf.h
new file mode 100644
index 000000000..3858828e6
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/halconf.h
@@ -0,0 +1,312 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM FALSE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/demos/rt/RT-SPC56EL-EVB/main.c b/demos/rt/RT-SPC56EL-EVB/main.c
new file mode 100644
index 000000000..2a460c43c
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/main.c
@@ -0,0 +1,207 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#if 0
+#define SHELL_WA_SIZE THD_WA_SIZE(1024)
+#define TEST_WA_SIZE THD_WA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+ size_t n, size;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: mem\r\n");
+ return;
+ }
+ n = chHeapStatus(NULL, &size);
+ chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus());
+ chprintf(chp, "heap fragments : %u\r\n", n);
+ chprintf(chp, "heap free total : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+ static const char *states[] = {THD_STATE_NAMES};
+ Thread *tp;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: threads\r\n");
+ return;
+ }
+ chprintf(chp, " addr stack prio refs state time\r\n");
+ tp = chRegFirstThread();
+ do {
+ chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n",
+ (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+ (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+ states[tp->p_state], (uint32_t)tp->p_time);
+ tp = chRegNextThread(tp);
+ } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+ Thread *tp;
+
+ (void)argv;
+ if (argc > 0) {
+ chprintf(chp, "Usage: test\r\n");
+ return;
+ }
+ tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(),
+ TestThread, chp);
+ if (tp == NULL) {
+ chprintf(chp, "out of memory\r\n");
+ return;
+ }
+ chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+ {"mem", cmd_mem},
+ {"threads", cmd_threads},
+ {"test", cmd_test},
+ {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+ (BaseSequentialStream *)&SD1,
+ commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static WORKING_AREA(waThread1, 128);
+static msg_t Thread1(void *arg) {
+
+ (void)arg;
+ chRegSetThreadName("blinker");
+
+ while (TRUE) {
+ unsigned i;
+
+ for (i = 0; i < 4; i++) {
+ palClearPad(PORT_D, PD_LED1);
+ chThdSleepMilliseconds(100);
+ palClearPad(PORT_D, PD_LED2);
+ chThdSleepMilliseconds(100);
+ palClearPad(PORT_D, PD_LED3);
+ chThdSleepMilliseconds(100);
+ palClearPad(PORT_D, PD_LED4);
+ chThdSleepMilliseconds(100);
+ palSetPad(PORT_D, PD_LED1);
+ chThdSleepMilliseconds(100);
+ palSetPad(PORT_D, PD_LED2);
+ chThdSleepMilliseconds(100);
+ palSetPad(PORT_D, PD_LED3);
+ chThdSleepMilliseconds(100);
+ palSetPad(PORT_D, PD_LED4);
+ chThdSleepMilliseconds(300);
+ }
+
+ for (i = 0; i < 4; i++) {
+ palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+ PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+ chThdSleepMilliseconds(500);
+ palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+ PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+ chThdSleepMilliseconds(500);
+ }
+
+ for (i = 0; i < 4; i++) {
+ palTogglePad(PORT_D, PD_LED1);
+ chThdSleepMilliseconds(250);
+ palTogglePad(PORT_D, PD_LED1);
+ palTogglePad(PORT_D, PD_LED2);
+ chThdSleepMilliseconds(250);
+ palTogglePad(PORT_D, PD_LED2);
+ palTogglePad(PORT_D, PD_LED3);
+ chThdSleepMilliseconds(250);
+ palTogglePad(PORT_D, PD_LED3);
+ palTogglePad(PORT_D, PD_LED4);
+ chThdSleepMilliseconds(250);
+ palTogglePad(PORT_D, PD_LED4);
+ }
+
+ for (i = 0; i < 4; i++) {
+ palClearPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+ palSetPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+ chThdSleepMilliseconds(500);
+ palClearPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+ palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+ chThdSleepMilliseconds(500);
+ }
+
+ palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+ PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+ }
+ return 0;
+}
+#endif
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+// Thread *shelltp = NULL;
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+// halInit();
+ chSysInit();
+
+ /*
+ * Shell manager initialization.
+ */
+// shellInit();
+
+ /*
+ * Activates the serial driver 1 using the driver default configuration.
+ */
+// sdStart(&SD1, NULL);
+
+ /*
+ * Creates the blinker thread.
+ */
+// chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ /*
+ * Normal main() thread activity.
+ */
+ while (TRUE) {
+#if 0
+ if (!shelltp)
+ shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+ else if (chThdTerminated(shelltp)) {
+ chThdRelease(shelltp); /* Recovers memory of the previous shell. */
+ shelltp = NULL; /* Triggers spawning of a new shell. */
+ }
+#endif
+ chThdSleepMilliseconds(1000);
+ }
+ return 0;
+}
diff --git a/demos/rt/RT-SPC56EL-EVB/mcuconf.h b/demos/rt/RT-SPC56EL-EVB/mcuconf.h
new file mode 100644
index 000000000..7fb5858cd
--- /dev/null
+++ b/demos/rt/RT-SPC56EL-EVB/mcuconf.h
@@ -0,0 +1,289 @@
+/*
+ SPC5 HAL - Copyright (C) 2013 STMicroelectronics
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * SPC56ELxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15 Lowest...Highest.
+ * DMA priorities:
+ * 0...15 Highest...Lowest.
+ */
+
+#define SPC56ELxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT FALSE
+#define SPC5_ALLOW_OVERCLOCK FALSE
+#define SPC5_DISABLE_WATCHDOG TRUE
+#define SPC5_FMPLL0_CLK_SRC SPC5_FMPLL_SRC_XOSC
+#define SPC5_FMPLL0_IDF_VALUE 5
+#define SPC5_FMPLL0_NDIV_VALUE 60
+#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4
+#define SPC5_FMPLL1_CLK_SRC SPC5_FMPLL_SRC_XOSC
+#define SPC5_FMPLL1_IDF_VALUE 5
+#define SPC5_FMPLL1_NDIV_VALUE 60
+#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4
+#define SPC5_SYSCLK_DIVIDER_VALUE 2
+#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL1
+#define SPC5_MCONTROL_DIVIDER_VALUE 15
+#define SPC5_SWG_DIVIDER_VALUE 2
+#define SPC5_AUX1CLK_SRC SPC5_CGM_SS_FMPLL1
+#define SPC5_FLEXRAY_DIVIDER_VALUE 2
+#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1
+#define SPC5_FLEXCAN_DIVIDER_VALUE 2
+#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \
+ SPC5_ME_ME_RUN2 | \
+ SPC5_ME_ME_RUN3 | \
+ SPC5_ME_ME_HALT0 | \
+ SPC5_ME_ME_STOP0)
+#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO)
+#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_PLL1ON | \
+ SPC5_ME_MC_FLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt("Clock failure")
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING 0
+#define SPC5_EDMA_GROUP0_PRIORITIES \
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO 12
+#define SPC5_EDMA_ERROR_HANDLER() chSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0 TRUE
+#define SPC5_SERIAL_USE_LINFLEX1 TRUE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY 8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY 8
+#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+/*
+ * PWM driver system settings.
+ */
+#define SPC5_PWM_USE_SMOD0 FALSE
+#define SPC5_PWM_USE_SMOD1 FALSE
+#define SPC5_PWM_USE_SMOD2 FALSE
+#define SPC5_PWM_USE_SMOD3 FALSE
+#define SPC5_PWM_SMOD0_PRIORITY 7
+#define SPC5_PWM_SMOD1_PRIORITY 7
+#define SPC5_PWM_SMOD2_PRIORITY 7
+#define SPC5_PWM_SMOD3_PRIORITY 7
+#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+#define SPC5_PWM_USE_SMOD4 FALSE
+#define SPC5_PWM_USE_SMOD5 FALSE
+#define SPC5_PWM_USE_SMOD6 FALSE
+#define SPC5_PWM_USE_SMOD7 FALSE
+#define SPC5_PWM_SMOD4_PRIORITY 7
+#define SPC5_PWM_SMOD5_PRIORITY 7
+#define SPC5_PWM_SMOD6_PRIORITY 7
+#define SPC5_PWM_SMOD7_PRIORITY 7
+#define SPC5_PWM_FLEXPWM1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_PWM_FLEXPWM1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+/*
+ * ICU driver system settings.
+ */
+#define SPC5_ICU_USE_SMOD0 FALSE
+#define SPC5_ICU_USE_SMOD1 FALSE
+#define SPC5_ICU_USE_SMOD2 FALSE
+#define SPC5_ICU_USE_SMOD3 FALSE
+#define SPC5_ICU_USE_SMOD4 FALSE
+#define SPC5_ICU_USE_SMOD5 FALSE
+#define SPC5_ICU_ETIMER0_PRIORITY 7
+#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_SMOD6 FALSE
+#define SPC5_ICU_USE_SMOD7 FALSE
+#define SPC5_ICU_USE_SMOD8 FALSE
+#define SPC5_ICU_USE_SMOD9 FALSE
+#define SPC5_ICU_USE_SMOD10 FALSE
+#define SPC5_ICU_USE_SMOD11 FALSE
+#define SPC5_ICU_ETIMER1_PRIORITY 7
+#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_SMOD12 FALSE
+#define SPC5_ICU_USE_SMOD13 FALSE
+#define SPC5_ICU_USE_SMOD14 FALSE
+#define SPC5_ICU_USE_SMOD15 FALSE
+#define SPC5_ICU_USE_SMOD16 FALSE
+#define SPC5_ICU_USE_SMOD17 FALSE
+#define SPC5_ICU_ETIMER2_PRIORITY 7
+#define SPC5_ICU_ETIMER2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0 FALSE
+#define SPC5_SPI_USE_DSPI1 FALSE
+#define SPC5_SPI_USE_DSPI2 FALSE
+#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID 4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID 5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID 6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID 7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID 8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID 9
+#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID 10
+#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID 11
+#define SPC5_SPI_DSPI2_RX_DMA_CH_ID 12
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI0_IRQ_PRIO 10
+#define SPC5_SPI_DSPI1_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_IRQ_PRIO 10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt("DMA failure")
+#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
+#define SPC5_SPI_DSPI2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
+ SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
+ SPC5_ME_PCTL_LP(0))
diff --git a/os/hal/boards/ST_EVB_SPC56EL/board.c b/os/hal/boards/ST_EVB_SPC56EL/board.c
index 87e967e1b..721f452e3 100644
--- a/os/hal/boards/ST_EVB_SPC56EL/board.c
+++ b/os/hal/boards/ST_EVB_SPC56EL/board.c
@@ -56,7 +56,7 @@ const PALConfig pal_default_config = {
*/
void __early_init(void) {
- spc_early_init();
+ spc_clock_init();
}
/*
diff --git a/os/hal/templates/osal.c b/os/hal/templates/osal.c
index 5ef8869e7..4ccb1cc2e 100644
--- a/os/hal/templates/osal.c
+++ b/os/hal/templates/osal.c
@@ -1,21 +1,17 @@
/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012,2013 Giovanni Di Sirio.
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- This file is part of ChibiOS/RT.
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
+ http://www.apache.org/licenses/LICENSE-2.0
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see .
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
*/
/**
diff --git a/os/hal/templates/osal.h b/os/hal/templates/osal.h
index 1510c97b7..c99fb44a3 100644
--- a/os/hal/templates/osal.h
+++ b/os/hal/templates/osal.h
@@ -1,21 +1,17 @@
/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012,2013 Giovanni Di Sirio.
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- This file is part of ChibiOS/RT.
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
+ http://www.apache.org/licenses/LICENSE-2.0
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see .
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
*/
/**
diff --git a/os/hal/templates/st_lld.c b/os/hal/templates/st_lld.c
new file mode 100644
index 000000000..6e77aa5fa
--- /dev/null
+++ b/os/hal/templates/st_lld.c
@@ -0,0 +1,67 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file PLATFORM/st_lld.c
+ * @brief ST Driver subsystem low level driver code.
+ *
+ * @addtogroup ST
+ * @{
+ */
+
+#include "hal.h"
+
+#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ST driver initialization.
+ *
+ * @notapi
+ */
+void st_lld_init(void) {
+}
+
+#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
+
+/** @} */
diff --git a/os/hal/templates/st_lld.h b/os/hal/templates/st_lld.h
new file mode 100644
index 000000000..dd743af51
--- /dev/null
+++ b/os/hal/templates/st_lld.h
@@ -0,0 +1,141 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file PLATFORM/st_lld.h
+ * @brief ST Driver subsystem low level driver header.
+ * @details This header is designed to be include-able without having to
+ * include other files from the HAL.
+ *
+ * @addtogroup ST
+ * @{
+ */
+
+#ifndef _ST_LLD_H_
+#define _ST_LLD_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void st_lld_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+/*===========================================================================*/
+/* Driver inline functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the time counter value.
+ *
+ * @return The counter value.
+ *
+ * @notapi
+ */
+static inline systime_t st_lld_get_counter(void) {
+
+ return (systime_t)0;
+}
+
+/**
+ * @brief Starts the alarm.
+ * @note Makes sure that no spurious alarms are triggered after
+ * this call.
+ *
+ * @param[in] time the time to be set for the first alarm
+ *
+ * @notapi
+ */
+static inline void st_lld_start_alarm(systime_t time) {
+
+ (void)time;
+}
+
+/**
+ * @brief Stops the alarm interrupt.
+ *
+ * @notapi
+ */
+static inline void st_lld_stop_alarm(void) {
+
+}
+
+/**
+ * @brief Sets the alarm time.
+ *
+ * @param[in] time the time to be set for the next alarm
+ *
+ * @notapi
+ */
+static inline void st_lld_set_alarm(systime_t time) {
+
+ (void)time;
+}
+
+/**
+ * @brief Returns the current alarm time.
+ *
+ * @return The currently set alarm time.
+ *
+ * @notapi
+ */
+static inline systime_t st_lld_get_alarm(void) {
+
+ return (systime_t)0;
+}
+
+/**
+ * @brief Determines if the alarm is active.
+ *
+ * @return The alarm status.
+ * @retval false if the alarm is not active.
+ * @retval true is the alarm is active
+ *
+ * @notapi
+ */
+static inline bool st_lld_is_alarm_active(void) {
+
+ return false;
+}
+
+#endif /* _ST_LLD_H_ */
+
+/** @} */
diff --git a/os/rt/osal/osal.h b/os/rt/osal/osal.h
index 868fca249..c26b9853d 100644
--- a/os/rt/osal/osal.h
+++ b/os/rt/osal/osal.h
@@ -136,6 +136,7 @@ typedef io_queue_t GenericQueue;
typedef input_queue_t InputQueue;
typedef output_queue_t OutputQueue;
typedef bool bool_t;
+#define OSAL_FREQUENCY OSAL_ST_FREQUENCY
#if 0
/**