mirror of https://github.com/rusefi/ChibiOS.git
Updated ADICUP360 demo
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@13682 27425a3e-05d8-49a3-a47f-9c15f0e5edd8
This commit is contained in:
parent
c709dd2a9f
commit
6740b61022
|
@ -62,11 +62,11 @@ int main(void) {
|
|||
|
||||
/*
|
||||
* Activates the serial driver 0 using the driver default configuration.
|
||||
* P0.1(TX) and P0.2(RX) are routed to UART0.
|
||||
* P0.6(RX) and P0.7(TX) are routed to UART0.
|
||||
*/
|
||||
sdStart(&SD0, NULL);
|
||||
palSetPadMode(GP0, 1, PAL_MODE_MULTIPLEXER(3) | PAL_ADUCM_PUL_PULLUP);
|
||||
palSetPadMode(GP0, 2, PAL_MODE_MULTIPLEXER(3) | PAL_ADUCM_PUL_PULLUP);
|
||||
palSetPadMode(GP0, 6, PAL_MODE_MULTIPLEXER(1) | PAL_ADUCM_PUL_PULLUP);
|
||||
palSetPadMode(GP0, 7, PAL_MODE_MULTIPLEXER(2) | PAL_ADUCM_PUL_PULLUP);
|
||||
|
||||
/*
|
||||
* Normal main() thread activity, in this demo it does nothing except
|
||||
|
|
|
@ -10,15 +10,15 @@ The demo runs on an ADICUP360 board.
|
|||
|
||||
The demo flashes the two on-board LEDs using a thread, by pressing the button
|
||||
located on the board (BOOT) the test procedure is activated with output on the
|
||||
serial port SD0 (UART0, mapped on mBED debug COM port).
|
||||
serial port SD0 (UART0, mapped on the User COM port).
|
||||
|
||||
** Board setup **
|
||||
|
||||
To redirect P0.1 and P0.2 to the mBED debug COM port it is required to setup
|
||||
To redirect P0.6 and P0.7 to the User COM port it is required to setup
|
||||
the switch matrix as:
|
||||
- S1 -> 0
|
||||
- S2 -> 1
|
||||
- S3 -> 1
|
||||
- S1 -> Don't Care
|
||||
- S2 -> 0
|
||||
- S3 -> Don't Care
|
||||
- S4 -> 0
|
||||
|
||||
** Build Procedure **
|
||||
|
|
Loading…
Reference in New Issue