More MP1 files.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@14776 27425a3e-05d8-49a3-a47f-9c15f0e5edd8

os/common/ext/ST/STM32MP1xx/stm32mp1xx.h

@@ -0,0 +1,228 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32MP1xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32MP1xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e.
+  *                code will be based on direct access to peripheral’s registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx
+  * @{
+  */
+
+#ifndef __STM32MP1xx_H
+#define __STM32MP1xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/* Uncomment the line below according to the target STM32MP1 device used in your
+   application
+  */
+
+#if !defined (STM32MP1)
+#define STM32MP1
+#endif /* STM32MP1 */
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number
+  */
+#define __STM32MP1xx_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32MP1xx_CMSIS_VERSION_SUB1   (0x04U) /*!< [23:16] sub1 version */
+#define __STM32MP1xx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32MP1xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32MP1xx_CMSIS_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(CORE_CM4)
+#if defined(STM32MP15xx)  /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
+  #include "stm32mp157cxx_cm4.h"
+#elif defined(STM32MP157Axx)
+  #include "stm32mp157axx_cm4.h"
+#elif defined(STM32MP157Cxx)
+  #include "stm32mp157cxx_cm4.h"
+#elif defined(STM32MP157Dxx)
+  #include "stm32mp157dxx_cm4.h"
+#elif defined(STM32MP157Fxx)
+  #include "stm32mp157fxx_cm4.h"
+#elif defined(STM32MP153Axx)
+  #include "stm32mp153axx_cm4.h"
+#elif defined(STM32MP153Cxx)
+  #include "stm32mp153cxx_cm4.h"
+#elif defined(STM32MP153Dxx)
+  #include "stm32mp153dxx_cm4.h"
+#elif defined(STM32MP153Fxx)
+  #include "stm32mp153fxx_cm4.h"
+#elif defined(STM32MP151Axx)
+  #include "stm32mp151axx_cm4.h"
+#elif defined(STM32MP151Cxx)
+  #include "stm32mp151cxx_cm4.h"
+#elif defined(STM32MP151Dxx)
+  #include "stm32mp151dxx_cm4.h"
+#elif defined(STM32MP151Fxx)
+  #include "stm32mp151fxx_cm4.h"
+#else
+ #error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
+#endif
+#endif
+
+#if defined(CORE_CA7)
+#if defined(STM32MP15xx)  /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
+  #include "stm32mp157cxx_ca7.h"
+#elif defined(STM32MP157Axx)
+  #include "stm32mp157axx_ca7.h"
+#elif defined(STM32MP157Cxx)
+  #include "stm32mp157cxx_ca7.h"
+#elif defined(STM32MP157Dxx)
+  #include "stm32mp157dxx_ca7.h"
+#elif defined(STM32MP157Fxx)
+  #include "stm32mp157fxx_ca7.h"
+#elif defined(STM32MP153Axx)
+  #include "stm32mp153axx_ca7.h"
+#elif defined(STM32MP153Cxx)
+  #include "stm32mp153cxx_ca7.h"
+#elif defined(STM32MP153Dxx)
+  #include "stm32mp153dxx_ca7.h"
+#elif defined(STM32MP153Fxx)
+  #include "stm32mp153fxx_ca7.h"
+#elif defined(STM32MP151Axx)
+  #include "stm32mp151axx_ca7.h"
+#elif defined(STM32MP151Cxx)
+  #include "stm32mp151cxx_ca7.h"
+#elif defined(STM32MP151Dxx)
+  #include "stm32mp151dxx_ca7.h"
+#elif defined(STM32MP151Fxx)
+  #include "stm32mp151fxx_ca7.h"
+#else
+ #error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
+#endif
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  ERROR = 0,
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32mp1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32MP1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

os/common/ext/ST/STM32MP1xx/system_stm32mp1xx.h

@@ -0,0 +1,106 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32mp1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-Mx Device System Source File for STM32MP1xx devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32MP1XX_H
+#define __SYSTEM_STM32MP1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/** @addtogroup STM32MP1xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32MP1xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Core1 Clock Frequency  */
+extern uint32_t SystemCore1Clock;         /*!< System Core1 Clock Frequency  */
+extern uint32_t SystemCore2Clock;         /*!< System Core2 Clock Frequency  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32MP1XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

os/common/startup/ARMCMx/devices/STM32G4xx/cmparams.h

@@ -18,7 +18,7 @@
  * @file    STM32G4xx/cmparams.h
  * @brief   ARM Cortex-M4 parameters for the STM32G4xx.
  *
- * @defgroup ARMCMx_STM32FGxx STM32FGxx Specific Parameters
+ * @defgroup ARMCMx_STM32Gxx STM32Gxx Specific Parameters
  * @ingroup ARMCMx_SPECIFIC
  * @details This file contains the Cortex-M4 specific parameters for the
  *          STM32G4xx platform.

os/common/startup/ARMCMx/devices/STM32MP1xx/cmparams.h

@@ -0,0 +1,93 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    STM32MP1xx/cmparams.h
+ * @brief   ARM Cortex-M4 parameters for the STM32MP1xx.
+ *
+ * @defgroup ARMCMx_STM32MP1xx STM32MP1xx Specific Parameters
+ * @ingroup ARMCMx_SPECIFIC
+ * @details This file contains the Cortex-M4 specific parameters for the
+ *          STM32MP1xx platform.
+ * @{
+ */
+
+#ifndef CMPARAMS_H
+#define CMPARAMS_H
+
+/**
+ * @brief   Cortex core model.
+ */
+#define CORTEX_MODEL            4
+
+/**
+ * @brief   Floating Point unit presence.
+ */
+#define CORTEX_HAS_FPU          1
+
+/**
+ * @brief   Number of bits in priority masks.
+ */
+#define CORTEX_PRIORITY_BITS    4
+
+/* If the device type is not externally defined, for example from the Makefile,
+   then a file named board.h is included. This file must contain a device
+   definition compatible with the vendor include file.*/
+#if !defined(STM32MP157Axx) && !defined(STM32MP157Cxx) &&                   \
+    !defined(STM32MP157Dxx) && !defined(STM32MP157Fxx) &&                   \
+    !defined(STM32MP153Axx) && !defined(STM32MP153Cxx) &&                   \
+    !defined(STM32MP153Dxx) && !defined(STM32MP153Fxx) &&                   \
+    !defined(STM32MP151Axx) && !defined(STM32MP151Cxx) &&                   \
+    !defined(STM32MP151Dxx) && !defined(STM32MP151Fxx) &&                   \
+#include "board.h"
+#endif
+
+/**
+ * @brief   Number of interrupt vectors.
+ * @note    This number does not include the 16 system vectors and must be
+ *          rounded to a multiple of 8.
+ */
+#define CORTEX_NUM_VECTORS      112
+
+/* The following code is not processed when the file is included from an
+   asm module.*/
+#if !defined(_FROM_ASM_)
+
+/* Including the device CMSIS header. Note, we are not using the definitions
+   from this header because we need this file to be usable also from
+   assembler source files. We verify that the info matches instead.*/
+#include "stm32mp1xx.h"
+
+/*lint -save -e9029 [10.4] Signedness comes from external files, it is
+  unpredictable but gives no problems.*/
+#if CORTEX_MODEL != __CORTEX_M
+#error "CMSIS __CORTEX_M mismatch"
+#endif
+
+#if CORTEX_HAS_FPU != __FPU_PRESENT
+#error "CMSIS __FPU_PRESENT mismatch"
+#endif
+
+#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS
+#error "CMSIS __NVIC_PRIO_BITS mismatch"
+#endif
+/*lint -restore*/
+
+#endif /* !defined(_FROM_ASM_) */
+
+#endif /* CMPARAMS_H */
+
+/** @} */