/** * @file STM32/i2c_lld.h * @brief STM32 I2C subsystem low level driver header. * @addtogroup STM32_I2C * @{ */ #ifndef _I2C_LLD_H_ #define _I2C_LLD_H_ #if HAL_USE_I2C || defined(__DOXYGEN__) /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @brief I2C1 driver enable switch. * @details If set to @p TRUE the support for I2C1 is included. * @note The default is @p TRUE. */ #if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__) #define STM32_I2C_USE_I2C1 TRUE #endif /** * @brief I2C2 driver enable switch. * @details If set to @p TRUE the support for I2C2 is included. * @note The default is @p TRUE. */ #if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__) #define STM32_I2C_USE_I2C2 TRUE #endif /** * @brief I2C1 interrupt priority level setting. * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV. */ #if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) #define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0 #endif /** * @brief I2C2 interrupt priority level setting. * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV. */ #if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) #define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0 #endif /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief Type of a structure representing an I2C driver. */ typedef struct I2CDriver I2CDriver; /** * @brief Type of a structure representing an I2C driver. */ typedef struct I2CSlaveConfig I2CSlaveConfig; /** * @brief I2C notification callback type. * @details This function must be used to send start or stop events to I2C bus, * and change states of I2CDriver. * * @param[in] i2cp pointer to the @p I2CDriver object triggering the * callback * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the * callback */ typedef void (*i2ccallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); /** * @brief I2C error notification callback type. * * @param[in] i2cp pointer to the @p I2CDriver object triggering the * callback * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the * callback */ typedef void (*i2cerrorcallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); typedef enum { opmodeI2C, opmodeSMBusDevice, opmodeSMBusHost, } I2C_opMode_t; typedef enum { stdDutyCycle, fastDutyCycle_2, fastDutyCycle_16_9, } I2C_DutyCycle_t; /** * @brief Driver configuration structure. */ typedef struct { I2C_opMode_t opMode; /*!< Specifies the I2C mode.*/ uint32_t ClockSpeed; /*!< Specifies the clock frequency. Must be set to a value lower than 400kHz */ I2C_DutyCycle_t FastModeDutyCycle;/*!< Specifies the I2C fast mode duty cycle */ uint8_t OwnAddress7; /*!< Specifies the first device 7-bit own address. */ uint16_t OwnAddress10; /*!< Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */ } I2CConfig; /** * @brief TODO: */ typedef uint32_t i2cflags_t; /** * @brief TODO: */ typedef uint8_t i2cblock_t; /** * @brief Structure representing an I2C slave configuration. * @details Each slave has its own data buffers, adress, and error flags. */ struct I2CSlaveConfig{ /** * @brief Callback pointer. * @note Transfer finished callback. Invoke when all data transferred, or * by DMA buffer events * If set to @p NULL then the callback is disabled. */ i2ccallback_t id_callback; /** * @brief Callback pointer. * @note This callback will be invoked when error condition occur. * If set to @p NULL then the callback is disabled. */ i2cerrorcallback_t id_err_callback; i2cblock_t *rxbuf; // pointer to buffer size_t rxdepth; // depth of buffer size_t rxbytes; // count of bytes to sent in one transmission size_t rxbufhead; // head pointer to current data byte i2cblock_t *txbuf; size_t txdepth; size_t txbytes; size_t txbufhead; /** * @brief Address word. * @details The MSB used to switch between 10-bit and 7-bit modes * (0 denotes 7-bit mode). Bits 0..9 contain slave address. * Bits 10..14 ignores in 10-bit mode. * Bits 7..14 ignores in 7-bot mode. */ uint16_t address; //TODO: join rw_bit, restart in one word. uint8_t rw_bit; // this flag contain R/W bit bool_t restart; // send restart or stop event after complete data tx/rx #if I2C_USE_WAIT /** * @brief Thread waiting for I/O completion. */ Thread *thread; #endif /* I2C_USE_WAIT */ }; /** * @brief Structure representing an I2C driver. */ struct I2CDriver{ /** * @brief Driver state. */ i2cstate_t id_state; #if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) #if CH_USE_MUTEXES || defined(__DOXYGEN__) /** * @brief Mutex protecting the bus. */ Mutex id_mutex; #elif CH_USE_SEMAPHORES Semaphore id_semaphore; #endif #endif /* I2C_USE_MUTUAL_EXCLUSION */ /** * @brief Current configuration data. */ I2CConfig *id_config; /** * @brief Current slave configuration data. */ I2CSlaveConfig *id_slave_config; /* End of the mandatory fields.*/ /** * @brief Pointer to the I2Cx registers block. */ I2C_TypeDef *id_i2c; } ; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ /** @cond never*/ #if STM32_I2C_USE_I2C1 extern I2CDriver I2CD1; #endif #if STM32_I2C_USE_I2C2 extern I2CDriver I2CD2; #endif #ifdef __cplusplus extern "C" { #endif void i2c_lld_init(void); void i2c_lld_start(I2CDriver *i2cp); void i2c_lld_stop(I2CDriver *i2cp); void i2c_lld_set_clock(I2CDriver *i2cp); void i2c_lld_set_opmode(I2CDriver *i2cp); void i2c_lld_set_own_address(I2CDriver *i2cp); void i2c_lld_master_start(I2CDriver *i2cp); void i2c_lld_master_stop(I2CDriver *i2cp); void i2c_lld_master_transmit_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart); void i2c_lld_master_transmitI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); void i2c_lld_master_receive_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); void i2c_lld_master_receiveI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); #ifdef __cplusplus } #endif /** @endcond*/ #endif // CH_HAL_USE_I2C #endif // _I2C_LLD_H_