ChibiOS/demos/AVR/RT-ARDUINO-MEGA
edolomb 45f105e043 Added I2C slave support for ST low level drivers.
Added I2C-MASTER_SLAVE multi demo.
Updated halconf.h 

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@16984 27425a3e-05d8-49a3-a47f-9c15f0e5edd8
2025-03-25 14:34:20 +00:00
..
cfg Added I2C slave support for ST low level drivers. 2025-03-25 14:34:20 +00:00
Makefile Fix variable name used to exclude the generic flash driver from AVR build. 2024-12-15 09:19:32 +00:00
main.c Mass change: Source code convention changed from CRLF to just CR (Unix). 2022-08-29 15:54:32 +00:00
readme.txt Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega2560.                               **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

The demo currently just prints the TestThread output on Serial0, which is
available on the board USB connector (FT232 converter), and toggles the LED
on PB7 (pin 13 on Arduino IDE) every second.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.