ChibiOS

History

edolomb 45f105e043 Added I2C slave support for ST low level drivers. Added I2C-MASTER_SLAVE multi demo. Updated halconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@16984 27425a3e-05d8-49a3-a47f-9c15f0e5edd8		2025-03-25 14:34:20 +00:00
..
cfg	Added I2C slave support for ST low level drivers.	2025-03-25 14:34:20 +00:00
Makefile	Fix variable name used to exclude the generic flash driver from AVR build.	2024-12-15 09:19:32 +00:00
led.cpp	[AVR] Add AVR/RT C++ demo for Arduinio Uno board.	2022-11-22 23:26:56 +00:00
led.hpp	[AVR] Add AVR/RT C++ demo for Arduinio Uno board.	2022-11-22 23:26:56 +00:00
main.cpp	Mass EOL change to Unix mode.	2022-12-11 14:52:30 +00:00
readme.txt	Mass EOL change to Unix mode.	2022-12-11 14:52:30 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega328p.                               **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Uno board.

** The Demo **

The demo currently just prints the message "Hello world" one time on Serial0,
which is available on the board USB connector (FT232 converter), and toggles
the LED on PB7 (pin 13 on Arduino IDE).

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.