ChibiOS

History

Giovanni Di Sirio 31786f55e6 git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/stable_21.11.x@16530 27425a3e-05d8-49a3-a47f-9c15f0e5edd8		2024-08-14 08:46:45 +00:00
..
cfg	git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/stable_21.11.x@16530 27425a3e-05d8-49a3-a47f-9c15f0e5edd8	2024-08-14 08:46:45 +00:00
make	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00
source	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00
web	Basic web page added.	2021-11-01 12:46:10 +00:00
.cproject	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00
.project	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00
Makefile	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00
main.c	New MMC_SPI driver and mass update of halconf.h files.	2022-12-26 08:25:35 +00:00
readme.txt	Trunk HAL back-port begin, not complete.	2022-12-18 10:02:45 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
*****************************************************************************

** TARGET **

The demo runs on an Olimex STM32-E407 board.

** The Demo **

The demo currently just flashes a LED using a thread and serves HTTP requests
at address 192.168.1.10 on port 80.
FatFs integrated using SDIO.
The USB-FS port is used as USB-CDC and a command shell is ready to accepts
commands there.

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com