ChibiOS

History

gdisirio ce80dcb337 Added UART driver support to the STM32F3xx HAL. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@4920 35acf78f-673a-0410-8e92-d51de3d6d3f4		2012-12-16 10:05:35 +00:00
..
.cproject	GPT, ICU, PWM tested on STM32F3xx.	2012-12-07 11:52:13 +00:00
.project	GPT, ICU, PWM tested on STM32F3xx.	2012-12-07 11:52:13 +00:00
Makefile	GPT, ICU, PWM tested on STM32F3xx.	2012-12-07 11:52:13 +00:00
chconf.h	GPT, ICU, PWM tested on STM32F3xx.	2012-12-07 11:52:13 +00:00
halconf.h	GPT, ICU, PWM tested on STM32F3xx.	2012-12-07 11:52:13 +00:00
main.c	Added UART driver support to the STM32F3xx HAL.	2012-12-16 10:05:35 +00:00
mcuconf.h	Added UART driver support to the STM32F3xx HAL.	2012-12-16 10:05:35 +00:00
readme.txt	Added UART driver support to the STM32F3xx HAL.	2012-12-16 10:05:35 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F3xx.              **
*****************************************************************************

** TARGET **

The demo runs on an STMicroelectronics STM32F3-Discovery board.

** The Demo **

The application demonstrates the use of the STM32F3xx GPT, PAL and Serial
drivers in order to implement a system stress demo.

** Board Setup **

- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com