mirror of https://github.com/rusefi/ChibiOS.git
c01e5a7c22
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@15242 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 |
||
|---|---|---|
| .. | ||
| cfg | ||
| .cproject | ||
| .project | ||
| Makefile | ||
| main.c | ||
| readme.txt | ||
readme.txt
*****************************************************************************
** ChibiOS/HAL - SPI driver demo for ARM-Cortex-M3 ADUCM360. **
*****************************************************************************
** TARGET **
The demo runs on an ADICUP360 board.
** The Demo **
The application demonstrates the use of the HAL SPI driver.
** Board setup **
To redirect P0.1 and P0.2 to the SPI connector it is required to setup
the switch matrix as:
- S1 -> 0
You should than connect P0.0 and P0.2 togheter (MISO1 and MOSI1 from the
P7 connector): this would guarantee the loopback connection.
** Build Procedure **
The command "make" builds the demo for the target. The demo can be compiled
using the "GNU ARM Embedded Toolchain" from:
https://launchpad.net/gcc-arm-embedded
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
Analog Devices and are licensed under a different license.
Also note that not all the files present within the Analog Devices
Cross Core Embedded Studio are distributed with ChibiOS/RT,
you can find the whole library on the ADI web site:
http://www.analog.com