ChibiOS/testhal/STM32/STM32L1xx/ADC
Giovanni Di Sirio d447fd6cee New hooks added to RT, stronger checks on RT chconf.h files.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11071 35acf78f-673a-0410-8e92-d51de3d6d3f4
2017-11-24 07:59:12 +00:00
..
debug
.cproject
.project git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8413 35acf78f-673a-0410-8e92-d51de3d6d3f4 2015-10-31 13:32:53 +00:00
Makefile git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10940 35acf78f-673a-0410-8e92-d51de3d6d3f4 2017-11-04 16:10:48 +00:00
chconf.h New hooks added to RT, stronger checks on RT chconf.h files. 2017-11-24 07:59:12 +00:00
halconf.h Re-alignment of all halconf.h files. 2017-10-22 13:34:38 +00:00
main.c Mass license update. 2016-03-18 10:29:35 +00:00
mcuconf.h Updated L1 mcuconf.h files. 2017-11-19 15:27:29 +00:00
readme.txt

readme.txt

*****************************************************************************
** ChibiOS/HAL - ADC driver demo for STM32L1xx.                            **
*****************************************************************************

** TARGET **

The demo will on an STMicroelectronics STM32L-Discovery board.

** The Demo **

The application demonstrates the use of the STM32L1xx ADC driver.

** Board Setup **

- Remove the LCD module.
- Connect PC0 to 3.3V and PC1 to GND for analog measurements.

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com