mirror of https://github.com/rusefi/ChibiOS.git
853216256a
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5521 35acf78f-673a-0410-8e92-d51de3d6d3f4 |
||
---|---|---|
.. | ||
iar | ||
Makefile | ||
chconf.h | ||
halconf.h | ||
main.c | ||
mcuconf.h | ||
memory.x | ||
msp430.x | ||
periph.x | ||
readme.txt |
readme.txt
***************************************************************************** ** ChibiOS/RT port for Texas Instruments MSP430X. ** ***************************************************************************** ** TARGET ** The demo runs on an customized MSP430-F5437 board with a 32768kHz XTAL1 installed. DCOCLK (=MCLK, =SMCLK) is set up to 20Mhz. From mcuconf.h: #define MSP430_USE_CLOCK MSP430_CLOCK_SOURCE_DCOCLK UART0 (38400/8N1) ist used for printing some board information. ** The Demo ** The demo runs first some tests, just to check port correctness. Meanwhile, green led light. After that the board red and green leds will flash in the cycle of ~0.5 and ~1.5 seconds respectively. ** Build Procedure ** The demo was built using the a) IAR for MSP430 5.10.1 (5.10.1.50144) toolchain; b) GCC version 4.6.3 20120301 (mspgcc LTS 20120406 unpatched). *** Notes *** On porting to an another MSP430X-MCU remember to check your linker settings for __heap_base__ and __heap_end__ symbols (or redefine these in asmdefines.s43).