ChibiOS/demos/AVR/TEST-SUITE-NIL
Theodore Ateba 789d91f0f5 AVR: Modification of the NIL test suite to avoid freezing at run time.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11394 35acf78f-673a-0410-8e92-d51de3d6d3f4
2018-01-22 21:24:44 +00:00
..
Makefile AVR: Add a demo for ChibiOS/NIL test suite purpose. 2017-12-23 15:27:00 +00:00
chconf.h AVR: Modification of the NIL test suite to avoid freezing at run time. 2018-01-22 21:24:44 +00:00
halconf.h Mass update of the Apache 2.0 license statement. 2018-01-20 11:44:14 +00:00
main.c AVR: Modification of the NIL test suite to avoid freezing at run time. 2018-01-22 21:24:44 +00:00
mcuconf.h Mass update of the Apache 2.0 license statement. 2018-01-20 11:44:14 +00:00
readme.txt AVR: Add a demo for ChibiOS/NIL test suite purpose. 2017-12-23 15:27:00 +00:00

readme.txt

*****************************************************************************
** ChibiOS/NIL port for Atmel AVR ATmega2560.                              **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

One thread prints a message to the serial console, which is available on
the board USB connector (FT232 converter).

Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.