ChibiOS

History

utzig 9970f28cb9 [AVR] use better defines for timer based drivers git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5943 35acf78f-673a-0410-8e92-d51de3d6d3f4		2013-07-08 22:26:33 +00:00
..
Makefile	Add HAL test for AVR PWM driver	2013-07-03 00:26:51 +00:00
chconf.h	Add HAL test for AVR PWM driver	2013-07-03 00:26:51 +00:00
halconf.h	Add HAL test for AVR PWM driver	2013-07-03 00:26:51 +00:00
main.c	Add HAL test for AVR PWM driver	2013-07-03 00:26:51 +00:00
mcuconf.h	[AVR] use better defines for timer based drivers	2013-07-08 22:26:33 +00:00
readme.txt	Add HAL test for AVR PWM driver	2013-07-03 00:26:51 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

This demo creates three PWM channels on pins PB5, PB6 and PB7. Each channel uses
a different duty cycle with PB7 having a duty cycle of 50%, PB6 a duty cycle of
25% and PB5 a duty cycle of 75%. Since the LED is connected to PB7 on the Arduino
Mega, it can be seen flashing in high speed.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.