ChibiOS

History

Theodore Ateba 3f30c447a3 [demo][avr] Update the AVR demo with the new Makefiles. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@13300 27425a3e-05d8-49a3-a47f-9c15f0e5edd8		2020-01-21 00:59:46 +00:00
..
cfg	[demo][avr] Update the AVR demo with the new Makefiles.	2020-01-21 00:59:46 +00:00
Makefile	[demo][avr] Update the AVR demo with the new Makefiles.	2020-01-21 00:59:46 +00:00
main.c	[demos][avr] Update the AVR NIL demos with the new API for thread creation.	2020-01-18 15:26:47 +00:00
readme.txt	AVR: Update readme.txt files in demos folders.	2017-10-01 09:42:28 +00:00

readme.txt

*****************************************************************************
** ChibiOS/NIL port for Atmel AVR ATTiny167.                               **
*****************************************************************************

** TARGET **

The demo runs on a Digispark Pro board based on an ATtiny167.

** The Demo **

A thread is used to print a message to the UART. The UART pins, must be
connected to an FTDI converter to see the message on a computer. The thread
also toggles the onboard test/status LED every second, the LED is connected
to the PB1 pin of the ATtiny167 MCU wich corresponds to P1 on the
Digispark Pro board.

** Build Procedure **

The demo was built using the GCC AVR toolchain.
It should build with WinAVR too!
Just run the command "make" to build this example.

** Programming procedure **

The ATtiny167 is pre-programmed with a bootloader.
Thus it can act as an USB device.
The Digispark Pro runs the “micronucleus” bootloader.
This bootloader comes with a command line tool which can be used to
program the board.
Form more details, look at the Makefile or the github repository:
https://github.com/micronucleus/micronucleus