ChibiOS

History

Theodore Ateba 75d472f580 AVR: Update all configuration files of RT demos to avoid the error CH_DBG_TRACE_MASK not defined in chconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11153 35acf78f-673a-0410-8e92-d51de3d6d3f4		2017-12-20 20:29:56 +00:00
..
Makefile	AVR: Resolve copilation errors due to new flags on configuration file. Remove the test suite part due to binary footprint under 100% of flash.	2017-12-19 22:33:36 +00:00
chconf.h	AVR: Update all configuration files of RT demos to avoid the error CH_DBG_TRACE_MASK not defined in chconf.h	2017-12-20 20:29:56 +00:00
halconf.h	Re-alignment of all halconf.h files.	2017-10-22 13:34:38 +00:00
main.c	AVR: Resolve copilation errors due to new flags on configuration file. Remove the test suite part due to binary footprint under 100% of flash.	2017-12-19 22:33:36 +00:00
mcuconf.h	Rename AVR demos	2017-06-09 23:31:17 +00:00
readme.txt	AVR: Update readme.txt files in demos folders.	2017-10-01 09:42:28 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega2560.                               **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

The demo currently just prints the TestThread output on Serial0, which is
available on the board USB connector (FT232 converter), and toggles the LED
on PB7 (pin 13 on Arduino IDE) every second.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.