mirror of https://github.com/rusefi/ChibiOS.git
36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
*****************************************************************************
|
|
** ChibiOS/HAL - SPI driver demo for ARM-Cortex-M3 ADUCM360. **
|
|
*****************************************************************************
|
|
|
|
** TARGET **
|
|
|
|
The demo runs on an ADICUP360 board.
|
|
|
|
** The Demo **
|
|
|
|
The application demonstrates the use of the HAL SPI driver.
|
|
|
|
** Board setup **
|
|
|
|
To redirect P0.1 and P0.2 to the SPI connector it is required to setup
|
|
the switch matrix as:
|
|
- S1 -> 0
|
|
You should than connect P0.0 and P0.2 togheter (MISO1 and MOSI1 from the
|
|
P7 connector): this would guarantee the loopback connection.
|
|
|
|
** Build Procedure **
|
|
|
|
The command "make" builds the demo for the target. The demo can be compiled
|
|
using the "GNU ARM Embedded Toolchain" from:
|
|
|
|
https://launchpad.net/gcc-arm-embedded
|
|
|
|
** Notes **
|
|
|
|
Some files used by the demo are not part of ChibiOS/RT but are copyright of
|
|
Analog Devices and are licensed under a different license.
|
|
Also note that not all the files present within the Analog Devices
|
|
Cross Core Embedded Studio are distributed with ChibiOS/RT,
|
|
you can find the whole library on the ADI web site:
|
|
|
|
http://www.analog.com |