mirror of https://github.com/rusefi/ChibiOS.git
82b91d56e7
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@13185 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 |
||
---|---|---|
.. | ||
cfg | ||
debug | ||
.cproject | ||
.project | ||
Makefile | ||
main.c | ||
readme.txt |
readme.txt
***************************************************************************** ** ChibiOS/RT port for ARM-Cortex-M3 ADICUP360. ** ***************************************************************************** ** TARGET ** The demo runs on an ADICUP360 board. ** The Demo ** The demo flashes the two on-board LEDs using a thread, by pressing the button located on the board (BOOT) the test procedure is activated with output on the serial port SD0 (UART0, mapped on mBED debug COM port). ** Board setup ** To redirect P0.1 and P0.2 to the mBED debug COM port it is required to setup the switch matrix as: - S1 -> 0 - S2 -> 1 - S3 -> 1 - S4 -> 0 ** Build Procedure ** The demo has been tested by using the free Codesourcery GCC-based toolchain and YAGARTO. Just modify the TRGT line in the makefile in order to use different GCC ports. ** Notes ** Some files used by the demo are not part of ChibiOS/RT but are copyright of Analog Devices and are licensed under a different license. Also note that not all the files present within the Analog Devices Cross Core Embedded Studio are distributed with ChibiOS/RT, you can find the whole library on the ADI web site: http://www.analog.com