mirror of https://github.com/rusefi/ChibiOS.git
47ff415e48
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@14945 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 |
||
---|---|---|
.. | ||
cfg | ||
.cproject | ||
.project | ||
Makefile | ||
main.c | ||
readme.txt |
readme.txt
***************************************************************************** ** ChibiOS/HAL - SPI driver demo for ARM-Cortex-M3 ADUCM360. ** ***************************************************************************** ** TARGET ** The demo runs on an ADICUP360 board. ** The Demo ** The application demonstrates the use of the HAL SPI driver. ** Board setup ** To redirect P0.1 and P0.2 to the SPI connector it is required to setup the switch matrix as: - S1 -> 0 You should than connect P0.0 and P0.2 togheter (MISO1 and MOSI1 from the P7 connector): this would guarantee the loopback connection. ** Build Procedure ** The command "make" builds the demo for the target. The demo can be compiled using the "GNU ARM Embedded Toolchain" from: https://launchpad.net/gcc-arm-embedded ** Notes ** Some files used by the demo are not part of ChibiOS/RT but are copyright of Analog Devices and are licensed under a different license. Also note that not all the files present within the Analog Devices Cross Core Embedded Studio are distributed with ChibiOS/RT, you can find the whole library on the ADI web site: http://www.analog.com