ChibiOS

History

Giovanni Di Sirio d200baf21f Fixed various typos and documentation-related issues. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10776 35acf78f-673a-0410-8e92-d51de3d6d3f4		2017-10-05 07:05:45 +00:00
..
Makefile	AVR: Update demos makefiles to have a clean compilation.	2017-09-16 15:51:15 +00:00
chconf.h	Fixed various typos and documentation-related issues.	2017-10-05 07:05:45 +00:00
halconf.h	Add NIL support for AVR Tiny architecture.	2017-07-14 21:52:58 +00:00
main.c	Add NIL support for AVR Tiny architecture.	2017-07-14 21:52:58 +00:00
mcuconf.h	Add NIL support for AVR Tiny architecture.	2017-07-14 21:52:58 +00:00
readme.txt	AVR: Update readme.txt files in demos folders.	2017-10-01 09:42:28 +00:00

readme.txt

*****************************************************************************
** ChibiOS/NIL port for Atmel AVR ATTiny167.                               **
*****************************************************************************

** TARGET **

The demo runs on a Digispark Pro board based on an ATtiny167.

** The Demo **

A thread is used to print a message to the UART. The UART pins, must be
connected to an FTDI converter to see the message on a computer. The thread
also toggles the onboard test/status LED every second, the LED is connected
to the PB1 pin of the ATtiny167 MCU wich corresponds to P1 on the
Digispark Pro board.

** Build Procedure **

The demo was built using the GCC AVR toolchain.
It should build with WinAVR too!
Just run the command "make" to build this example.

** Programming procedure **

The ATtiny167 is pre-programmed with a bootloader.
Thus it can act as an USB device.
The Digispark Pro runs the “micronucleus” bootloader.
This bootloader comes with a command line tool which can be used to
program the board.
Form more details, look at the Makefile or the github repository:
https://github.com/micronucleus/micronucleus