rusefi
/
ChibiOS
mirror of https://github.com/rusefi/ChibiOS.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ChibiOS/os/hal/platforms/STM32/i2c_lld.h

413 lines
13 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/i2c_lld.h
* @brief STM32 I2C subsystem low level driver header.
* @addtogroup I2C
* @{
*/
#ifndef _I2C_LLD_H_
#define _I2C_LLD_H_
#if HAL_USE_I2C || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief I2C1 driver enable switch.
* @details If set to @p TRUE the support for I2C1 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C1 FALSE
#endif
/**
* @brief I2C2 driver enable switch.
* @details If set to @p TRUE the support for I2C2 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C2 FALSE
#endif
/**
* @brief I2C3 driver enable switch.
* @details If set to @p TRUE the support for I2C3 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_I2C_USE_I2C3) || defined(__DOXYGEN__)
#define STM32_I2C_USE_I2C3 FALSE
#endif
/**
* @brief I2C1 interrupt priority level setting.
* @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
*/
#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0
#endif
/**
* @brief I2C2 interrupt priority level setting.
* @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
*/
#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0
#endif
/**
* @brief I2C2 interrupt priority level setting.
* @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
*/
#if !defined(STM32_I2C_I2C3_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_IRQ_PRIORITY 0xA0
#endif
/**
* @brief I2C1 DMA error hook.
* @note The default action for DMA errors is a system halt because DMA
* error can only happen because programming errors.
*/
#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_I2C_DMA_ERROR_HOOK(uartp) chSysHalt()
#endif
#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
/**
* @brief DMA stream used for I2C1 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C1_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#endif
/**
* @brief DMA stream used for I2C1 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C1_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#endif
/**
* @brief DMA stream used for I2C2 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C2_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#endif
/**
* @brief DMA stream used for I2C2 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C2_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#endif
/**
* @brief DMA stream used for I2C3 RX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C3_RX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#endif
/**
* @brief DMA stream used for I2C3 TX operations.
* @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_I2C_I2C3_TX_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#endif
#else /* !STM32_ADVANCED_DMA */
/* Fixed streams for platforms using the old DMA peripheral, the values are
valid for both STM32F1xx and STM32L1xx.*/
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#endif /* !STM32_ADVANCED_DMA*/
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/** @brief flags for interrupt handling */
#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY) << 16) | I2C_SR1_SB)) /* BUSY, MSL and SB flag */
#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | I2C_SR1_BTF | I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */
#define I2C_EV_MASK 0x00FFFFFF /* First byte zeroed because there is no need of PEC register part from SR2 */
#define I2C_FLG_MASTER_RECEIVER 0x10
#define I2C_FLG_HEADER_SENT 0x80
#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
#error "I2C1 not present in the selected device"
#endif
#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
#error "I2C2 not present in the selected device"
#endif
#if STM32_I2C_USE_I2C3 && !STM32_HAS_I2C3
#error "I2C3 not present in the selected device"
#endif
#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2 && \
!STM32_I2C_USE_I2C3
#error "I2C driver activated but no I2C peripheral assigned"
#endif
#if STM32_I2C_USE_I2C1 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
STM32_I2C1_RX_DMA_MSK)
#error "invalid DMA stream associated to USART1 RX"
#endif
#if STM32_I2C_USE_I2C1 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
STM32_I2C1_TX_DMA_MSK)
#error "invalid DMA stream associated to USART1 TX"
#endif
#if STM32_I2C_USE_I2C2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
STM32_I2C2_RX_DMA_MSK)
#error "invalid DMA stream associated to USART2 RX"
#endif
#if STM32_I2C_USE_I2C2 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
STM32_I2C2_TX_DMA_MSK)
#error "invalid DMA stream associated to USART2 TX"
#endif
#if STM32_I2C_USE_I2C3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_RX_DMA_STREAM, \
STM32_I2C3_RX_DMA_MSK)
#error "invalid DMA stream associated to USART3 RX"
#endif
#if STM32_I2C_USE_I2C3 && \
!STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_TX_DMA_STREAM, \
STM32_I2C3_TX_DMA_MSK)
#error "invalid DMA stream associated to USART3 TX"
#endif
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief I2C Driver condition flags type.
*/
typedef uint32_t i2cflags_t;
typedef enum {
OPMODE_I2C = 1,
OPMODE_SMBUS_DEVICE = 2,
OPMODE_SMBUS_HOST = 3,
} i2copmode_t;
typedef enum {
STD_DUTY_CYCLE = 1,
FAST_DUTY_CYCLE_2 = 2,
FAST_DUTY_CYCLE_16_9 = 3,
} i2cdutycycle_t;
/**
* @brief Driver configuration structure.
*/
typedef struct {
i2copmode_t op_mode; /**< @brief Specifies the I2C mode.*/
uint32_t clock_speed; /**< @brief Specifies the clock frequency. Must be set to a value lower than 400kHz */
i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode duty cycle */
} I2CConfig;
/**
* @brief Type of a structure representing an I2C driver.
*/
typedef struct I2CDriver I2CDriver;
/**
* @brief Type of a structure representing an I2C slave config.
*/
typedef struct I2CSlaveConfig I2CSlaveConfig;
/**
* @brief Structure representing an I2C driver.
*/
struct I2CDriver{
/**
* @brief Driver state.
*/
i2cstate_t id_state;
#if I2C_USE_WAIT
/**
* @brief Thread waiting for I/O completion.
*/
Thread *id_thread;
#endif /* I2C_USE_WAIT */
#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
#if CH_USE_MUTEXES || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the bus.
*/
Mutex id_mutex;
#elif CH_USE_SEMAPHORES
Semaphore id_semaphore;
#endif
#endif /* I2C_USE_MUTUAL_EXCLUSION */
/**
* @brief Current configuration data.
*/
const I2CConfig *id_config;
/**
* @brief Current slave configuration data.
*/
const I2CSlaveConfig *id_slave_config;
__IO size_t txbytes; /*!< @brief Number of bytes to be transmitted. */
__IO size_t rxbytes; /*!< @brief Number of bytes to be received. */
uint8_t *rxbuf; /*!< @brief Pointer to receive buffer. */
uint8_t *txbuf; /*!< @brief Pointer to transmit buffer.*/
__IO i2cflags_t errors; /*!< @brief Error flags.*/
__IO i2cflags_t flags; /*!< @brief State flags.*/
uint8_t slave_addr; /*!< @brief Current slave address without R/W bit. */
#if CH_USE_EVENTS
EventSource sevent; /*!< @brief Status Change @p EventSource.*/
#endif
/*********** End of the mandatory fields. **********************************/
uint32_t dmamode; /*!< @brief DMA mode bit mask.*/
const stm32_dma_stream_t *dmarx; /*!< @brief Receive DMA channel.*/
const stm32_dma_stream_t *dmatx; /*!< @brief Transmit DMA channel.*/
I2C_TypeDef *id_i2c; /*!< @brief Pointer to the I2Cx registers block. */
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
#define i2c_lld_bus_is_busy(i2cp) \
(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)
/* Wait until BUSY flag is reset: a STOP has been generated on the bus
* signaling the end of transmission. Normally this wait function
* does not block thread, only if slave not response it does.
*/
#define i2c_lld_wait_bus_free(i2cp) { \
uint32_t tmo = 0xfffff; \
while((i2cp->id_i2c->SR2 & I2C_SR2_BUSY) && tmo--) \
; \
}
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
/** @cond never*/
#if STM32_I2C_USE_I2C1
extern I2CDriver I2CD1;
#endif
#if STM32_I2C_USE_I2C2
extern I2CDriver I2CD2;
#endif
#if STM32_I2C_USE_I2C3
extern I2CDriver I2CD3;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void i2c_lld_init(void);
void i2c_lld_reset(I2CDriver *i2cp);
void i2c_lld_set_clock(I2CDriver *i2cp);
void i2c_lld_set_opmode(I2CDriver *i2cp);
void i2c_lld_start(I2CDriver *i2cp);
void i2c_lld_stop(I2CDriver *i2cp);
void i2c_lld_master_transmit(I2CDriver *i2cp, uint8_t slave_addr,
uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes);
void i2c_lld_master_receive(I2CDriver *i2cp, uint8_t slave_addr,
uint8_t *rxbuf, size_t rxbytes);
#ifdef __cplusplus
}
#endif
/** @endcond*/
#endif /* CH_HAL_USE_I2C */
#endif /* _I2C_LLD_H_ */
Reference in New Issue View Git Blame Copy Permalink