ChibiOS/testhal/STM32F1xx/IRQ_STORM
gdisirio d4187a3454 git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3494 35acf78f-673a-0410-8e92-d51de3d6d3f4 2011-11-15 19:06:48 +00:00
..
Makefile git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3461 35acf78f-673a-0410-8e92-d51de3d6d3f4 2011-11-02 20:39:26 +00:00
chconf.h
halconf.h
main.c git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3494 35acf78f-673a-0410-8e92-d51de3d6d3f4 2011-11-15 19:06:48 +00:00
mcuconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3484 35acf78f-673a-0410-8e92-d51de3d6d3f4 2011-11-10 20:27:29 +00:00
readme.txt git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3494 35acf78f-673a-0410-8e92-d51de3d6d3f4 2011-11-15 19:06:48 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT HAL - IRQ-STORM demo for STM32.                              **
*****************************************************************************

** TARGET **

The demo runs on an Olimex STM32-P103 board.

** The Demo **

The application demonstrates the use of the STM32F1xx GPT, PAL and Serial
drivers in order to implement a system stress demo.

** Board Setup **

None.

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distribited
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com