rusefi
/
RabbitECUTeensyMCUXpresso
mirror of https://github.com/rusefi/RabbitECUTeensyMCUXpresso.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
RabbitECUTeensyMCUXpresso/source/Peripherals/VCOMHA.c

758 lines
28 KiB
C
Raw Blame History

/*
* Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
* Copyright 2016 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "fsl_device_registers.h"
#include "clock_config.h"
#include "board.h"
#include <stdio.h>
#include <stdlib.h>
#include "usb_device_config.h"
#include "usb.h"
#include "usb_device.h"
#include "usb_device_class.h"
#include "usb_device_cdc_acm.h"
#include "usb_device_ch9.h"
#include "build.h"
#include "types.h"
#include "sysapi.h"
#include "dll.h"
#include "usb_device_descriptor.h"
#include "CPUAbstract.h"
#include "declarations.h"
#include <VCOMHA.h>
#if (defined(FSL_FEATURE_SOC_SYSMPU_COUNT) && (FSL_FEATURE_SOC_SYSMPU_COUNT > 0U))
//#include "fsl_sysmpu.h"
#endif /* FSL_FEATURE_SOC_SYSMPU_COUNT */
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0)
#include "usb_phy.h"
#endif
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
#include "fsl_smc.h"
#endif
#include "fsl_common.h"
#include "pin_mux.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/* USB clock source and frequency*/
#define USB_FS_CLK_SRC kCLOCK_UsbSrcPll0
#define USB_FS_CLK_FREQ CLOCK_GetFreq(kCLOCK_PllFllSelClk)
/*******************************************************************************
* Prototypes
******************************************************************************/
void BOARD_InitHardware(void);
void BOARD_DbgConsole_Deinit(void);
void BOARD_DbgConsole_Init(void);
usb_status_t USB_DeviceCdcVcomCallback(class_handle_t handle, uint32_t event, void *param);
usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param);
/*******************************************************************************
* Variables
******************************************************************************/
extern usb_device_endpoint_struct_t g_UsbDeviceCdcVcomDicEndpoints[];
extern usb_device_class_struct_t g_UsbDeviceCdcVcomConfig;
/* Data structure of virtual com device */
static usb_cdc_vcom_struct_t s_cdcVcom;
/* Line codinig of cdc device */
static uint8_t s_lineCoding[LINE_CODING_SIZE] = {
/* E.g. 0x00,0xC2,0x01,0x00 : 0x0001C200 is 115200 bits per second */
(LINE_CODING_DTERATE >> 0U) & 0x000000FFU,
(LINE_CODING_DTERATE >> 8U) & 0x000000FFU,
(LINE_CODING_DTERATE >> 16U) & 0x000000FFU,
(LINE_CODING_DTERATE >> 24U) & 0x000000FFU,
LINE_CODING_CHARFORMAT,
LINE_CODING_PARITYTYPE,
LINE_CODING_DATABITS};
/* Abstract state of cdc device */
static uint8_t s_abstractState[COMM_FEATURE_DATA_SIZE] = {(STATUS_ABSTRACT_STATE >> 0U) & 0x00FFU,
(STATUS_ABSTRACT_STATE >> 8U) & 0x00FFU};
/* Country code of cdc device */
static uint8_t s_countryCode[COMM_FEATURE_DATA_SIZE] = {(COUNTRY_SETTING >> 0U) & 0x00FFU,
(COUNTRY_SETTING >> 8U) & 0x00FFU};
/* CDC ACM information */
USB_DATA_ALIGNMENT static usb_cdc_acm_info_t s_usbCdcAcmInfo = {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 0, 0, 0, 0, 0};
/* Data buffer for receiving and sending*/
USB_DATA_ALIGNMENT static uint8_t s_currRecvBuf[USB_DATA_BUFF_SIZE];
USB_DATA_ALIGNMENT static uint8_t s_currSendBuf[USB_DATA_BUFF_SIZE];
volatile static uint32_t s_recvSize = 0;
volatile static uint32_t s_sendSize = 0;
/* USB device class information */
static usb_device_class_config_struct_t s_cdcAcmConfig[1] = {{
USB_DeviceCdcVcomCallback, 0, &g_UsbDeviceCdcVcomConfig,
}};
/* USB device class configuration information */
static usb_device_class_config_list_struct_t s_cdcAcmConfigList = {
s_cdcAcmConfig, USB_DeviceCallback, 1,
};
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
volatile static uint8_t s_waitForDataReceive = 0;
volatile static uint8_t s_comOpen = 0;
#endif
/*******************************************************************************
* Code
******************************************************************************/
/*!
* @brief CDC class specific callback function.
*
* This function handles the CDC class specific requests.
*
* @param handle The CDC ACM class handle.
* @param event The CDC ACM class event type.
* @param param The parameter of the class specific request.
*
* @return A USB error code or kStatus_USB_Success.
*/
usb_status_t USB_DeviceCdcVcomCallback(class_handle_t handle, uint32_t event, void *param)
{
uint32_t len;
uint16_t *uartBitmap;
usb_device_cdc_acm_request_param_struct_t *acmReqParam;
usb_device_endpoint_callback_message_struct_t *epCbParam;
usb_status_t error = kStatus_USB_Error;
usb_cdc_acm_info_t *acmInfo = &s_usbCdcAcmInfo;
acmReqParam = (usb_device_cdc_acm_request_param_struct_t *)param;
epCbParam = (usb_device_endpoint_callback_message_struct_t *)param;
switch (event)
{
case kUSB_DeviceCdcEventSendResponse:
{
if ((epCbParam->length != 0) && (!(epCbParam->length % g_UsbDeviceCdcVcomDicEndpoints[0].maxPacketSize)))
{
/* If the last packet is the size of endpoint, then send also zero-ended packet,
** meaning that we want to inform the host that we do not have any additional
** data, so it can flush the output.
*/
error = USB_DeviceCdcAcmSend(handle, USB_CDC_VCOM_BULK_IN_ENDPOINT, NULL, 0);
}
//else if ((1 == s_cdcVcom.attach) && (1 == s_cdcVcom.startTransactions))
else if (1 == s_cdcVcom.attach)
{
if ((epCbParam->buffer != NULL) || ((epCbParam->buffer == NULL) && (epCbParam->length == 0)))
{
/* User: add your own code for send complete event */
/* Schedule buffer for next receive event */
error = USB_DeviceCdcAcmRecv(handle, USB_CDC_VCOM_BULK_OUT_ENDPOINT, s_currRecvBuf,
g_UsbDeviceCdcVcomDicEndpoints[0].maxPacketSize);
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
s_waitForDataReceive = 1;
USB0->INTEN &= ~USB_INTEN_SOFTOKEN_MASK;
#endif
}
}
else
{
}
}
break;
case kUSB_DeviceCdcEventRecvResponse:
{
//if ((1 == s_cdcVcom.attach) && (1 == s_cdcVcom.startTransactions))
if (1 == s_cdcVcom.attach)
{
s_recvSize = epCbParam->length;
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
s_waitForDataReceive = 0;
USB0->INTEN |= USB_INTEN_SOFTOKEN_MASK;
#endif
if (!s_recvSize)
{
/* Schedule buffer for next receive event */
error = USB_DeviceCdcAcmRecv(handle, USB_CDC_VCOM_BULK_OUT_ENDPOINT, s_currRecvBuf,
g_UsbDeviceCdcVcomDicEndpoints[0].maxPacketSize);
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
s_waitForDataReceive = 1;
USB0->INTEN &= ~USB_INTEN_SOFTOKEN_MASK;
#endif
}
}
}
break;
case kUSB_DeviceCdcEventSerialStateNotif:
((usb_device_cdc_acm_struct_t *)handle)->hasSentState = 0;
error = kStatus_USB_Success;
break;
case kUSB_DeviceCdcEventSendEncapsulatedCommand:
break;
case kUSB_DeviceCdcEventGetEncapsulatedResponse:
break;
case kUSB_DeviceCdcEventSetCommFeature:
if (USB_DEVICE_CDC_FEATURE_ABSTRACT_STATE == acmReqParam->setupValue)
{
if (1 == acmReqParam->isSetup)
{
*(acmReqParam->buffer) = s_abstractState;
}
else
{
*(acmReqParam->length) = 0;
}
}
else if (USB_DEVICE_CDC_FEATURE_COUNTRY_SETTING == acmReqParam->setupValue)
{
if (1 == acmReqParam->isSetup)
{
*(acmReqParam->buffer) = s_countryCode;
}
else
{
*(acmReqParam->length) = 0;
}
}
else
{
}
error = kStatus_USB_Success;
break;
case kUSB_DeviceCdcEventGetCommFeature:
if (USB_DEVICE_CDC_FEATURE_ABSTRACT_STATE == acmReqParam->setupValue)
{
*(acmReqParam->buffer) = s_abstractState;
*(acmReqParam->length) = COMM_FEATURE_DATA_SIZE;
}
else if (USB_DEVICE_CDC_FEATURE_COUNTRY_SETTING == acmReqParam->setupValue)
{
*(acmReqParam->buffer) = s_countryCode;
*(acmReqParam->length) = COMM_FEATURE_DATA_SIZE;
}
else
{
}
error = kStatus_USB_Success;
break;
case kUSB_DeviceCdcEventClearCommFeature:
break;
case kUSB_DeviceCdcEventGetLineCoding:
*(acmReqParam->buffer) = s_lineCoding;
*(acmReqParam->length) = LINE_CODING_SIZE;
error = kStatus_USB_Success;
break;
case kUSB_DeviceCdcEventSetLineCoding:
{
if (1 == acmReqParam->isSetup)
{
*(acmReqParam->buffer) = s_lineCoding;
}
else
{
*(acmReqParam->length) = 0;
}
}
error = kStatus_USB_Success;
break;
case kUSB_DeviceCdcEventSetControlLineState:
{
s_usbCdcAcmInfo.dteStatus = acmReqParam->setupValue;
/* activate/deactivate Tx carrier */
if (acmInfo->dteStatus & USB_DEVICE_CDC_CONTROL_SIG_BITMAP_CARRIER_ACTIVATION)
{
acmInfo->uartState |= USB_DEVICE_CDC_UART_STATE_TX_CARRIER;
}
else
{
acmInfo->uartState &= (uint16_t)~USB_DEVICE_CDC_UART_STATE_TX_CARRIER;
}
/* activate carrier and DTE */
if (acmInfo->dteStatus & USB_DEVICE_CDC_CONTROL_SIG_BITMAP_DTE_PRESENCE)
{
acmInfo->uartState |= USB_DEVICE_CDC_UART_STATE_RX_CARRIER;
}
else
{
acmInfo->uartState &= (uint16_t)~USB_DEVICE_CDC_UART_STATE_RX_CARRIER;
}
/* Indicates to DCE if DTE is present or not */
acmInfo->dtePresent = (acmInfo->dteStatus & USB_DEVICE_CDC_CONTROL_SIG_BITMAP_DTE_PRESENCE) ? true : false;
/* Initialize the serial state buffer */
acmInfo->serialStateBuf[0] = NOTIF_REQUEST_TYPE; /* bmRequestType */
acmInfo->serialStateBuf[1] = USB_DEVICE_CDC_NOTIF_SERIAL_STATE; /* bNotification */
acmInfo->serialStateBuf[2] = 0x00; /* wValue */
acmInfo->serialStateBuf[3] = 0x00;
acmInfo->serialStateBuf[4] = 0x00; /* wIndex */
acmInfo->serialStateBuf[5] = 0x00;
acmInfo->serialStateBuf[6] = UART_BITMAP_SIZE; /* wLength */
acmInfo->serialStateBuf[7] = 0x00;
/* Notifiy to host the line state */
acmInfo->serialStateBuf[4] = acmReqParam->interfaceIndex;
/* Lower byte of UART BITMAP */
uartBitmap = (uint16_t *)&acmInfo->serialStateBuf[NOTIF_PACKET_SIZE + UART_BITMAP_SIZE - 2];
*uartBitmap = acmInfo->uartState;
len = (uint32_t)(NOTIF_PACKET_SIZE + UART_BITMAP_SIZE);
if (0 == ((usb_device_cdc_acm_struct_t *)handle)->hasSentState)
{
error = USB_DeviceCdcAcmSend(handle, USB_CDC_VCOM_INTERRUPT_IN_ENDPOINT, acmInfo->serialStateBuf, len);
if (kStatus_USB_Success != error)
{
usb_echo("kUSB_DeviceCdcEventSetControlLineState error!");
}
((usb_device_cdc_acm_struct_t *)handle)->hasSentState = 1;
}
/* Update status */
if (acmInfo->dteStatus & USB_DEVICE_CDC_CONTROL_SIG_BITMAP_CARRIER_ACTIVATION)
{
/* To do: CARRIER_ACTIVATED */
}
else
{
/* To do: CARRIER_DEACTIVATED */
}
#if 0
// Disable Transaction for .NET applications
if (acmInfo->dteStatus & USB_DEVICE_CDC_CONTROL_SIG_BITMAP_DTE_PRESENCE)
{
/* DTE_ACTIVATED */
if (1 == s_cdcVcom.attach)
{
s_cdcVcom.startTransactions = 1;
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
s_waitForDataReceive = 1;
USB0->INTEN &= ~USB_INTEN_SOFTOKEN_MASK;
s_comOpen = 1;
usb_echo("USB_APP_CDC_DTE_ACTIVATED\r\n");
#endif
}
}
else
{
/* DTE_DEACTIVATED */
if (1 == s_cdcVcom.attach)
{
s_cdcVcom.startTransactions = 0;
}
}
#endif //0
}
break;
case kUSB_DeviceCdcEventSendBreak:
break;
default:
break;
}
return error;
}
/*!
* @brief USB device callback function.
*
* This function handles the usb device specific requests.
*
* @param handle The USB device handle.
* @param event The USB device event type.
* @param param The parameter of the device specific request.
*
* @return A USB error code or kStatus_USB_Success.
*/
usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param)
{
usb_status_t error = kStatus_USB_Error;
uint16_t *temp16 = (uint16_t *)param;
uint8_t *temp8 = (uint8_t *)param;
switch (event)
{
case kUSB_DeviceEventBusReset:
{
s_cdcVcom.attach = 0;
#if (defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U)) || \
(defined(USB_DEVICE_CONFIG_LPCIP3511HS) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U))
/* Get USB speed to configure the device, including max packet size and interval of the endpoints. */
if (kStatus_USB_Success == USB_DeviceClassGetSpeed(CONTROLLER_ID, &s_cdcVcom.speed))
{
USB_DeviceSetSpeed(handle, s_cdcVcom.speed);
}
#endif
}
break;
case kUSB_DeviceEventSetConfiguration:
if (param)
{
s_cdcVcom.attach = 1;
s_cdcVcom.currentConfiguration = *temp8;
if (USB_CDC_VCOM_CONFIGURE_INDEX == (*temp8))
{
/* Schedule buffer for receive */
USB_DeviceCdcAcmRecv(s_cdcVcom.cdcAcmHandle, USB_CDC_VCOM_BULK_OUT_ENDPOINT, s_currRecvBuf,
g_UsbDeviceCdcVcomDicEndpoints[0].maxPacketSize);
}
}
break;
case kUSB_DeviceEventSetInterface:
if (s_cdcVcom.attach)
{
uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
uint8_t alternateSetting = (uint8_t)(*temp16 & 0x00FFU);
if (interface < USB_CDC_VCOM_INTERFACE_COUNT)
{
s_cdcVcom.currentInterfaceAlternateSetting[interface] = alternateSetting;
}
}
break;
case kUSB_DeviceEventGetConfiguration:
break;
case kUSB_DeviceEventGetInterface:
break;
case kUSB_DeviceEventGetDeviceDescriptor:
if (param)
{
error = USB_DeviceGetDeviceDescriptor(handle, (usb_device_get_device_descriptor_struct_t *)param);
}
break;
case kUSB_DeviceEventGetConfigurationDescriptor:
if (param)
{
error = USB_DeviceGetConfigurationDescriptor(handle,
(usb_device_get_configuration_descriptor_struct_t *)param);
}
break;
case kUSB_DeviceEventGetStringDescriptor:
if (param)
{
/* Get device string descriptor request */
error = USB_DeviceGetStringDescriptor(handle, (usb_device_get_string_descriptor_struct_t *)param);
}
break;
default:
break;
}
return error;
}
/*!
* @brief USB Interrupt service routine.
*
* This function serves as the USB interrupt service routine.
*
* @return None.
*/
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U)
void USBHS_IRQHandler(void)
{
USB_DeviceEhciIsrFunction(s_cdcVcom.deviceHandle);
}
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 1U)
#if defined(FSL_FEATURE_SOC_USBNC_COUNT) && (FSL_FEATURE_SOC_USBNC_COUNT > 1U)
void USB1_IRQHandler(void)
{
USB_DeviceEhciIsrFunction(s_cdcVcom.deviceHandle);
}
#endif
#endif
#endif
#if defined(USB_DEVICE_CONFIG_KHCI) && (USB_DEVICE_CONFIG_KHCI > 0U)
void USB0_IRQHandler(void)
{
USB_DeviceKhciIsrFunction(s_cdcVcom.deviceHandle);
}
#endif
#if (defined(USB_DEVICE_CONFIG_LPCIP3511FS) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U))
void USB0_IRQHandler(void)
{
USB_DeviceLpcIp3511IsrFunction(s_cdcVcom.deviceHandle);
}
#endif
#if defined(USB_DEVICE_CONFIG_LPCIP3511HS) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)
void USB1_IRQHandler(void)
{
USB_DeviceLpcIp3511IsrFunction(s_cdcVcom.deviceHandle);
}
#endif
/*!
* @brief Application initialization function.
*
* This function initializes the application.
*
* @return None.
*/
void VCOM_vStart(uint32* const u32Stat)
{
uint8_t irqNo;
CPU_vDisableMPROT();
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0)
uint8_t ehciIrq[] = USBHS_IRQS;
irqNo = ehciIrq[CONTROLLER_ID - kUSB_ControllerEhci0];
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 1U)
if (CONTROLLER_ID == kUSB_ControllerEhci0)
{
CLOCK_EnableUsbhs0PhyPllClock(USB_HS_PHY_CLK_SRC, USB_HS_PHY_CLK_FREQ);
CLOCK_EnableUsbhs0Clock(USB_HS_CLK_SRC, USB_HS_CLK_FREQ);
}
else
{
CLOCK_EnableUsbhs1PhyPllClock(USB_HS_PHY_CLK_SRC, USB_HS_PHY_CLK_FREQ);
CLOCK_EnableUsbhs1Clock(USB_HS_CLK_SRC, USB_HS_CLK_FREQ);
}
#else
CLOCK_EnableUsbhs0PhyPllClock(USB_HS_PHY_CLK_SRC, USB_HS_PHY_CLK_FREQ);
CLOCK_EnableUsbhs0Clock(USB_HS_CLK_SRC, USB_HS_CLK_FREQ);
#endif
USB_EhciPhyInit(CONTROLLER_ID, BOARD_XTAL0_CLK_HZ);
#endif
#if defined(USB_DEVICE_CONFIG_KHCI) && (USB_DEVICE_CONFIG_KHCI > 0)
uint8_t khciIrq[] = USB_IRQS;
irqNo = khciIrq[CONTROLLER_ID - kUSB_ControllerKhci0];
SystemCoreClockUpdate();
CLOCK_EnableUsbfs0Clock(USB_FS_CLK_SRC, USB_FS_CLK_FREQ);
#endif
#if (defined(USB_DEVICE_CONFIG_LPCIP3511FS) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U))
uint8_t usbDeviceIP3511Irq[] = USB_IRQS;
irqNo = usbDeviceIP3511Irq[CONTROLLER_ID - kUSB_ControllerLpcIp3511Fs0];
/* enable USB IP clock */
CLOCK_EnableUsbfs0DeviceClock(USB_FS_CLK_SRC, USB_FS_CLK_FREQ);
#endif
#if defined(USB_DEVICE_CONFIG_LPCIP3511HS) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)
uint8_t usbDeviceIP3511Irq[] = USBHSD_IRQS;
irqNo = usbDeviceIP3511Irq[CONTROLLER_ID - kUSB_ControllerLpcIp3511Hs0];
/* enable USB IP clock */
CLOCK_EnableUsbhs0DeviceClock(USB_HS_CLK_SRC, USB_HS_CLK_FREQ);
#endif
#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
#if defined(FSL_FEATURE_USBHSD_USB_RAM) && (FSL_FEATURE_USBHSD_USB_RAM)
for (int i = 0; i < FSL_FEATURE_USBHSD_USB_RAM; i++)
{
((uint8_t *)FSL_FEATURE_USBHSD_USB_RAM_BASE_ADDRESS)[i] = 0x00U;
}
#endif
#endif
#if (defined(FSL_FEATURE_SOC_SYSMPU_COUNT) && (FSL_FEATURE_SOC_SYSMPU_COUNT > 0U))
//SYSMPU_Enable(SYSMPU, 0);
#endif /* FSL_FEATURE_SOC_SYSMPU_COUNT */
/*
* If the SOC has USB KHCI dedicated RAM, the RAM memory needs to be clear after
* the KHCI clock is enabled. When the demo uses USB EHCI IP, the USB KHCI dedicated
* RAM can not be used and the memory can't be accessed.
*/
#if (defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U))
#if (defined(FSL_FEATURE_USB_KHCI_USB_RAM_BASE_ADDRESS) && (FSL_FEATURE_USB_KHCI_USB_RAM_BASE_ADDRESS > 0U))
for (int i = 0; i < FSL_FEATURE_USB_KHCI_USB_RAM; i++)
{
((uint8_t *)FSL_FEATURE_USB_KHCI_USB_RAM_BASE_ADDRESS)[i] = 0x00U;
}
#endif /* FSL_FEATURE_USB_KHCI_USB_RAM_BASE_ADDRESS */
#endif /* FSL_FEATURE_USB_KHCI_USB_RAM */
s_cdcVcom.speed = USB_SPEED_FULL;
s_cdcVcom.attach = 0;
s_cdcVcom.cdcAcmHandle = (class_handle_t)NULL;
s_cdcVcom.deviceHandle = NULL;
if (kStatus_USB_Success != USB_DeviceClassInit(CONTROLLER_ID, &s_cdcAcmConfigList, &s_cdcVcom.deviceHandle))
{
usb_echo("USB device init failed\r\n");
}
else
{
usb_echo("USB device CDC virtual com demo\r\n");
s_cdcVcom.cdcAcmHandle = s_cdcAcmConfigList.config->classHandle;
}
#if defined(__GIC_PRIO_BITS)
GIC_SetPriority((IRQn_Type)irqNo, USB_DEVICE_INTERRUPT_PRIORITY);
#else
NVIC_SetPriority((IRQn_Type)irqNo, USB_DEVICE_INTERRUPT_PRIORITY);
#endif
EnableIRQ((IRQn_Type)irqNo);
USB_DeviceRun(s_cdcVcom.deviceHandle);
}
/*!
* @brief Application task function.
*
* This function runs the task for application.
*
* @return None.
*/
void VCOM_vRun(uint32* const u32Stat)
{
usb_status_t error = kStatus_USB_Error;
//if ((1 == s_cdcVcom.attach) && (1 == s_cdcVcom.startTransactions))
if (1 == s_cdcVcom.attach)
{
if ((0 != s_recvSize) && (0xFFFFFFFFU != s_recvSize))
{
DLL_tstRXDLLData* pstRXDLLData = DLL_pstGetRXBuffer(EH_VIO_USB);
puint8 pu8RXData = pstRXDLLData->u8Data;
pstRXDLLData->u8DataCount = s_recvSize;
memcpy(pstRXDLLData->u8Data, s_currRecvBuf, s_recvSize);
/* User Code */
DLL_vFrameRXCB(EH_VIO_USB, pu8RXData);
s_recvSize = 0;
}
if (s_sendSize)
{
uint32_t size = s_sendSize;
s_sendSize = 0;
error = USB_DeviceCdcAcmSend(s_cdcVcom.cdcAcmHandle, USB_CDC_VCOM_BULK_IN_ENDPOINT, s_currSendBuf, size);
if (error != kStatus_USB_Success)
{
/* Failure to send Data Handling code here */
}
}
#if defined(FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED) && (FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED > 0U) && \
defined(USB_DEVICE_CONFIG_KEEP_ALIVE_MODE) && (USB_DEVICE_CONFIG_KEEP_ALIVE_MODE > 0U) && \
defined(FSL_FEATURE_USB_KHCI_USB_RAM) && (FSL_FEATURE_USB_KHCI_USB_RAM > 0U)
if ((s_waitForDataReceive))
{
if (s_comOpen == 1)
{
/* Wait for all the packets been sent during opening the com port. Otherwise these packets may
* wake up the system.
*/
usb_echo("Waiting to enter lowpower ...\r\n");
for (uint32_t i = 0U; i < 16000000U; ++i)
{
__ASM("NOP"); /* delay */
}
s_comOpen = 0;
}
usb_echo("Enter lowpower\r\n");
BOARD_DbgConsole_Deinit();
USB0->INTEN &= ~USB_INTEN_TOKDNEEN_MASK;
SMC_SetPowerModeVlps(SMC);
s_waitForDataReceive = 0;
USB0->INTEN |= USB_INTEN_TOKDNEEN_MASK;
BOARD_DbgConsole_Init();
usb_echo("Exit lowpower\r\n");
}
#endif
}
}
SYSAPI_tenSVCResult VCOM_enInitBus(IOAPI_tenEHIOResource enEHIOResource, IOAPI_tstPortConfigCB* pstPortConfigCB)
{
SYSAPI_tenSVCResult enSVCResult = SYSAPI_enBadResource;
if (TRUE == DLL_boInitDLLChannel(enEHIOResource, pstPortConfigCB))
{
enSVCResult = SYSAPI_enOK;
}
return enSVCResult;
}
void VCOM_vTerminate(uint32* const u32Stat)
{
}
void VCOMHA_vSend(IOAPI_tenEHIOResource enEHIOResource, puint8 pu8Data, uint32 u32TXByteCount)
{
usb_status_t error = kStatus_USB_Error;
if (0 != u32TXByteCount)
{
memcpy(s_currSendBuf, pu8Data, u32TXByteCount);
error = USB_DeviceCdcAcmSend(s_cdcVcom.cdcAcmHandle, USB_CDC_VCOM_BULK_IN_ENDPOINT, s_currSendBuf, u32TXByteCount);
if (error != kStatus_USB_Success)
{
/* Failure to send Data Handling code here */
}
}
}
#if USB_DEVICE_CONFIG_USE_TASK
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U)
// USB_DeviceEhciTaskFunction(s_cdcVcom.deviceHandle);
#endif
#if defined(USB_DEVICE_CONFIG_KHCI) && (USB_DEVICE_CONFIG_KHCI > 0U)
// USB_DeviceKhciTaskFunction(s_cdcVcom.deviceHandle);
#endif
#if (defined(USB_DEVICE_CONFIG_LPCIP3511FS) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U))
// USB_DeviceLpcIp3511TaskFunction(s_cdcVcom.deviceHandle);
#endif
#if defined(USB_DEVICE_CONFIG_LPCIP3511HS) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)
// USB_DeviceLpcIp3511TaskFunction(s_cdcVcom.deviceHandle);
#endif
#endif
// }
//}
Reference in New Issue View Git Blame Copy Permalink