Forgot to add one image

2020-08-27 23:41:03 -07:00 · 2020-08-27 23:41:03 -07:00 · 882f086c59
parent 8570a9a35a
commit 882f086c59
1 changed files with 3 additions and 0 deletions
--- a/can_db/ft86.md
+++ b/can_db/ft86.md
@ -86,6 +86,9 @@ instead of adding a 12V-to-5V converter to your hardware design.
 You can use the two middle pins of a
 [Toyota radio harness](https://www.amazon.com/gp/product/B0002BEQJ8)
 to connect to the CAN bus in a reliable way.
+
+![CAN socket wiring](../images/ft86_socket_wiring.jpg)
+
 It's recommended to use a ~60–90 cm (2–3') twisted pair cable between that port
 and your CAN reader. I would strongly discourage you from using the screw
 terminals on the MCP2515 board, as if the cable comes loose it can cause a short