41 lines
1.5 KiB
C
41 lines
1.5 KiB
C
#if !defined(RACECHRONO_BIY_BLE_DEVICE_CONFIG_H)
|
|
#define RACECHRONO_BIY_BLE_DEVICE_CONFIG_H
|
|
|
|
// Change the value to customize the name of your device.
|
|
#define DEVICE_NAME "BLE CAN device demo"
|
|
|
|
// We use RaceChronoPidMap to keep track of stuff for each CAN ID.
|
|
// In this implementation, we're going to ignore "update intervals" requested by
|
|
// RaceChrono, and instead send every Nth CAN message we receive, per CAN ID, where
|
|
// N is different for different PIDs.
|
|
const uint8_t DEFAULT_UPDATE_RATE_DIVIDER = 10;
|
|
|
|
// You need to pick one of the provided configurations below, or define your own
|
|
// configuration. Your configuration should define the following constant and
|
|
// function:
|
|
|
|
// Defines the baud rate to use for the CAN bus. For example, 500k baud rate
|
|
// should be written as 500 * 1e3.
|
|
extern const long BAUD_RATE; // 500k.
|
|
|
|
// Returns an "update rate divider for a given CAN ID.
|
|
// If the value is N, only every Nth message received from the CAN bus will be
|
|
// communicated to RaceChrono via BLE.
|
|
uint8_t getUpdateRateDivider(uint32_t can_id);
|
|
|
|
|
|
// Here are some configurations you can pick from by uncommenting one of the
|
|
// following lines:
|
|
//#include "configs/ft86_gen1.h"
|
|
//#include "configs/ft86_gen2.h"
|
|
|
|
// Once you read all the comments and address what they asked of you, please
|
|
// uncomment the nest line:
|
|
//#define I_READ_THE_COMMENTS
|
|
|
|
#if !defined(I_READ_THE_COMMENTS)
|
|
#error Please open config.h and read all the comments!
|
|
#endif // I_READ_THE_COMMENTS
|
|
|
|
#endif // RACECHRONO_BIY_BLE_DEVICE_CONFIG_H
|