RomRaider/release notes.txt

                      - Enginuity 0.4.0 Beta -
            Open-Source ECU Tuning -- www.enginuity.org


PLEASE MAKE SURE TO READ RELEASE _NOTES.TXT_ EACH TIME YOU DOWNLOAD
A NEW VERSION OF ENGINUITY. IMPORTANT NOTICES, KNOWN ISSUES AND
NEW FEATURES WILL BE DISCUSSED.

Enginuity is a full featured Engine Control Unit editing application 
for tuning virtually any manufacturer, meant to be used in conjuction
with ECU flash and dump utilities. Enginuity will give you full 
control over timing, fuel, boost and many other parameters in your 
ECU, competing with very expensive and proprietary software. Enginuity 
will remove your need for piggyback systems designed to control these 
functions, and, in most cases, work as well as or better than any 
stand alone engine management. Reflashing your stock ECU also has the 
added benefit of a manufacturer tested base map, giving you top notch 
performance and saving time tuning idle and low throttle applications
while retaining all of the benefit of the research and development
manufacturer's spend millions of dollars on.

Enginuity is currently in BETA TEST status, meaning it is not 
thoroughly tested and not intended for use by inexperienced users. In 
addition to being incomplete and untested, only experienced tuners 
with the required tools (ie, wideband oxygen sensor) should modify an 
ECU image. As with any engine management, changes could result in 
severe engine damage. Use at your own risk.

Documentation is available at http://wiki.enginuity.org and the
official Enginuity FAQ can be found at
http://www.enginuity.org/about444.html. Please be aware that as 
Enginuity is still in beta status and changing frequently, 
documentation may be incomplete or out of date.



-----------------------------
- 0.4.0b Notes (11/10/2006) -
-----------------------------
We've been very busy in the last few months and have added some major
new features, including data logging via Subaru Select Protocol and
3D graphing of table data. Please be aware that these new features 
are considered alpha quality and are expected to have some bugs.
Please check the Bug Reporting forum on Enginuity.org before reporting
any problems you may find.



-----------------------
- 0.4.0b Known Issues -
-----------------------
- 3d graph
  - Java3d over most VNC implementations will show a blank JFrame
  - You MUST have up to date graphics drivers that support OpenGL 1.2 
  - Expect ~200 megs of usage when using 3d graphing
  - Expect possible memory leaks when using 3d graphing
  - There are some problems with cell selection in 3d graphs
  - Numerical interpolation can take some time on slower machines
- Logging
  - Logger does not remember last selected COM port
  - Some parameters may display incorrectly. WE KNOW THIS and will
    work to improve it in later releases. You may check Enginuity.org
    for updated logger definition (xml) files.
- Other
  - File associations will work only in Windows systems



------------------------
- Future Release Notes -
------------------------
The next release, 0.4.1b, will include an overhauled XML definition
parser and significant changes to the XML schema. Current definition
files will become obsolete. The release will include a new definition
file, but if you have created your own custom definitions you will
need to convert them. We MAY include an automatic converter with
the release. You can follow our discussion on the new format in this
thread:
http://www.enginuity.org/viewtopic.php?t=822



-----------
- Changes -
-----------

0.4.0b (11/10/2006)
-------------------
- Add file associations
- Ability to view (but not modify) tables above userlevel
- Add link to latest ECU definitions
- Fix switch (CEL fix) inheritance
- Fix table ordering in child ROMs
- Fix table level display in property panel
- Fix label fonts on 3D tables
- Logging
- 3D graphing
- Interpolating (map smoothing)


0.3.2b (8/12/2006)
------------------
- Installer/Shortcuts
- Add status bar
- Add support for hex ID strings for Mitsubishi support
- Fix goofy behavior of increase/decrease at limits
- Add multiply values function
- Improve exception handling in XML parser
- Add lockable tables via ECU definitions
- Rearrange 3D table labels
- Improve datacell colorize method
- Add limits to table values in XML
- Fix exiting through menu not saving settings
- Add ECU Definition Manager


0.3.1b (7/11/2006)
------------------
- Change year attribute to string from int
- Fix incrementing in compare mode 
- Fix refresh tables working improperly with multiple ROMs open 
- Update table property panel
- Fix float values not incrementing properly in axiis
- Fix values not incrementing if increment amount is less than LSB
- Add option whether to display tables higher than userlevel
- Add option whether to save changes made to debug tables
- Fix clicking on ROM tree opening/closing wrong tables
- Fix switch tables not compensating for RAM
- Fix many memory leak problems
- List tables above userlevel, but disabled
- Color debug tables red
- Add "version" tag to settings
- Show release notes on first run
- Remove unnecessary variables from settings XML
- Add name and description to CEL/checksum fix tables
- Fix "(null)" text on static 2D axiis
- Remove table name from bottom of 2D table
- Allow single clicking to open tables (via settings)
- Add fine adjustment values to ECU definition
- Fix map copy/paste
- Increment affects real instead of binary value
- User levels
- Fix definition parser rounding incrementby values
- Improve table properties display
- Fix byte/real conversion validation


0.3.0b (7/2/2006)
---------------------------------------
- Finish map comparing implementation


0.2.93a Private Test Release (7/1/2006)
---------------------------------------
- Added "switch" table type


0.2.92a Private Test Release (7/1/2006)
----------------------------------------
- Fixed squares appearing instead of some float values
- Fixed exception when entering decimals in coarse value
- Fixed set value field being cast to integer instead of decimal
- Fixed progress bar not closing on errors
- Pressing "." now focuses set value field


0.2.91a Private Test Release (6/30/2006)
----------------------------------------
- Fixed memory usage issues
- Added performance and other memory optimizations


0.2.90a Private Test Release (6/30/2006)
----------------------------------------
- Added 32-bit ECU (float) support


0.2.7.4b (5/09/2006)
--------------------
- Fixed 16-bit 3D tables saving improperly
- Added compare to original value function


0.2.7.3b (4/17/2006)
--------------------
- Fix border colors not showing changes from keyboard
- Add progress indicators
- Remove table definition generator
- Fix refresh button closing images with same filename
- Fix border/background of static axiis
- Fix rounding problems causing false conflicts for conversion expressions
- Fix set value not updating borders
- Reset default settings option
- Fix cell border not saving 
- Improve warning messages
- Fix ECU definition file settings not saving
- Fix last image directory resetting
- Fix updated cell border not updating


0.2.7.2b (4/12/2006)
--------------------
- Fixed close all images


0.2.7.1b (4/12/2006)
--------------------
- Fixed ECU definitions not saving
- Fixed last image directory not saving
- Fixed colors not saving
- Fixed increased/decreased cell borders not updating


0.2.7b (4/12/2006)
------------------
- Replace serialized settings object with XML
- Settings panel
- Custom sizes/fonts/colors for tables
- Fix blue 2D table axiis
- Fix exception when clicking on table list
- Expression/to_byte conflict warning
- Rename packages to conventional lowercase
- Improve refresh method when saving
- Improve exception reporting
- Implement "obsolete" tag -- set up wiki with ROM revision info
- Group tables by category
- Fix descriptions not working
- Fix 2D table navigation


0.2.6b (4/5/2006)
-----------------
- Shortcut keys
- Improve display of tables too large for window (MDI)
- Improve exception reporting
- Improve saved window position on exit (panel size, maximized)
- Remove "copy" from table menu -- its in the edit menu
- Fix vertical overhead on table size for new graphical buttons
- Fix rounding issues with set value
- Fix ctrl-click on tables  
- Resize cells to make best use of screen
- Prevent simultaneous selection of axiis and table values 
- Map copying
- Graphical icons
- Cascade windows (MDI)
- Fix table frame JScrollPane (MDI)


0.2.5b (3/28/2006)
------------------
- Import tables by single address
- Refresh image button
- Table properties
- Add "obsolete" tag for images with more recent revisions
- Fix application not closing files after reading
- Add file extensions to open/save dialog (HEX, BIN)
- Fix parser searching by XML ID instead of internal storage ID
- Image properties
- Show positive (red) and negative (blue) value changes on tables
BUG FIXES:
- Decrement (fine) increments
- Files not closing after being read
- Set value rounds goofy
- 1D tables not colorizing properly
- 2D tables not working properly
- Set value field shows negative numbers


0.2.4a (3/21/2006)
------------------
- "Base" attribute for extending/duplicating tables
- "Omit" attribute not required to omit tables -- just set storageaddress to "0"
- Fine and coarse adjustment of values
- Direct value input
- Support for ROMs with or without RAM sectors


0.2.3a (2/27/2006)
------------------
- ECU definitions including each other (endless loop) is now handled
- "Omit" attribute allows incomplete tables to be removed from inheriting definitions
- Nested includes (includes more than 1 definition deep) tested and working properly


0.2.2a (2/26/2006)
------------------
- Include support in XML definitions (exception handling not yet implemented!)


0.2.1a (2/13/2006)
------------------
- Handles storage addresses that are out of range
- Fixed conflicting parent/child table sizes (done) 
- Replaced "<Table Name>" menu with "Table" -- makes it more obviously a menu
- Fixed 3D table sizing problem
- Fixed colorizing exception
- Fixed backwards endians
- Fixed storage address out of range exception
- Improved close image method


.20a (2/11/2006)
----------------
-Completely rewritten
-XML ECU definitions
-View multiple images and tables


.14a (11/26/2005)
------------------
-Improved axis cell modification
-Fixed absolute value calculations

.13a
-----
-Revised text entry of values
-Added EUDM WRX support
-Improved multiple cell selection
-Improved axis cell modification
-Axis cell changes can be saved

Supported ECU Versions/Version Added - Deprecated as of version .20a. ECU versions are now defined in ecu_defs.xml.
----------------------
2004/2005 USDM WRX:
-A4TF300E .13a
-A4TF400E .13a
-A4TF800E .13a
-A4TF500F .13a
-A4TF510F .13a
-A4TF800F .13a

2002/2003 USDM WRX:
-A4TC300L .13a
-A4SGC00C .13a
-A4SGD10C .13a
-A4SG900C .13a

2003 EUDM WRX:
-A4TE001G .13a