2014-09-15 15:40:17 -07:00
|
|
|
# Buzzer
|
|
|
|
|
|
|
|
Cleanflight supports a buzzer which is used for the following purposes, and more:
|
|
|
|
|
|
|
|
Low Battery alarm (when battery monitoring enabled)
|
|
|
|
Notification of calibration complete status.
|
|
|
|
AUX operated beeping - useful for locating your aircraft after a crash.
|
|
|
|
Failsafe status.
|
|
|
|
|
|
|
|
Buzzer is enabled by default on platforms that have buzzer connections.
|
|
|
|
|
|
|
|
## Types of buzzer supported
|
|
|
|
|
|
|
|
The buzzers are enabled/disabled by simply enabling or disabling a GPIO output pin on the board.
|
|
|
|
This means the buzzer must be able to generate it's own tone simply by having power applied to it.
|
|
|
|
|
|
|
|
Buzzers that need an analogue or PWM signal do not work and will make clicking noises or no sound at all.
|
|
|
|
|
|
|
|
Example of a known-working buzzer.
|
|
|
|
|
|
|
|
http://www.rapidonline.com/Audio-Visual/Hcm1205x-Miniature-Buzzer-5v-35-0055
|
|
|
|
|
2014-09-19 13:35:30 -07:00
|
|
|
## Connections
|
|
|
|
|
|
|
|
### Naze32
|
|
|
|
|
|
|
|
Connect a supported buzzer directly to the BUZZ pins. Observe polarity.
|
|
|
|
|
|
|
|
### CC3D
|
|
|
|
|
|
|
|
Buzzer support on the CC3D requires that a buzzer circuit be created to which the input is PA15.
|
|
|
|
PA15 is unused and not connected according to the CC3D Revision A schematic.
|
|
|
|
Connecting to PA15 requires careful soldering.
|
|
|
|
|
|
|
|
See the CC3D - buzzer circuir.pdf for details.
|