Additional cleanup of generic Flashing docs.
This commit is contained in:
parent
ab30a208e1
commit
02d8313437
|
@ -1,7 +1,7 @@
|
||||||
# Installation
|
# Installation
|
||||||
|
|
||||||
## Using the configurator
|
## Using the configurator
|
||||||
This is a generic procedure to flash a board using the configurator. The configurator does not yet support all boards, so please check the docs corresponding to your board before proceeding.
|
This is a generic procedure to flash a board using the configurator. The configurator does not yet support all boards, so please check the documentation corresponding to your board before proceeding.
|
||||||
|
|
||||||
Make sure you have the [Cleanflight Configurator](https://github.com/cleanflight/cleanflight-configurator) installed, then:
|
Make sure you have the [Cleanflight Configurator](https://github.com/cleanflight/cleanflight-configurator) installed, then:
|
||||||
|
|
||||||
|
@ -15,7 +15,7 @@ Make sure you have the [Cleanflight Configurator](https://github.com/cleanflight
|
||||||
* If this is the first time Cleanflight is flashed to the board, tick the "Full Chip Erase" checkbox.
|
* If this is the first time Cleanflight is flashed to the board, tick the "Full Chip Erase" checkbox.
|
||||||
* Connect the flight controller board to the PC. Ensure the correct serial port is selected.
|
* Connect the flight controller board to the PC. Ensure the correct serial port is selected.
|
||||||
* Click on the "Flash Firmware" button and hold still (do not breathe, too).
|
* Click on the "Flash Firmware" button and hold still (do not breathe, too).
|
||||||
* When the progress becomes green and reads "Programming: SUCCESSFUL" you are done!
|
* When the progress bar becomes green and reads "Programming: SUCCESSFUL" you are done!
|
||||||
|
|
||||||
## Manually
|
## Manually
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue