Add ESCSERIAL for missing targets

src/main/target/F4BY/target.h

@@ -103,6 +103,9 @@
 
 #define SERIAL_PORT_COUNT       6 //VCP, UART1, UART2, UART3, UART4, UART5, UART6
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 8 // PWM 9
+
 #define USE_SPI
 #define USE_SPI_DEVICE_1
 #define SPI1_SCK_PIN            PA5

src/main/target/FURYF4/target.h

@@ -133,6 +133,9 @@
 
 #define SERIAL_PORT_COUNT       4 //VCP, USART1, USART3, USART6
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define USE_SPI
 
 #define USE_SPI_DEVICE_1

src/main/target/FishDroneF4/target.h

@@ -69,6 +69,9 @@
 
 #define SERIAL_PORT_COUNT       4 // VCP, USART1, USART3, USART6
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 // *************** OSD *****************************
 #define USE_SPI_DEVICE_2
 #define SPI2_NSS_PIN            PB12

src/main/target/IMPULSERCF3/target.h

@@ -55,6 +55,9 @@
 #define USE_UART3
 #define SERIAL_PORT_COUNT 4
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10
 

src/main/target/IRCFUSIONF3/target.h

@@ -47,6 +47,9 @@
 #define USE_UART3
 #define SERIAL_PORT_COUNT 3
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10
 

src/main/target/ISHAPEDF3/target.h

@@ -61,6 +61,9 @@
 #define USE_SOFTSERIAL2
 #define SERIAL_PORT_COUNT       5
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10
 

src/main/target/KAKUTEF4/target.h

@@ -93,6 +93,9 @@
 
 #define SERIAL_PORT_COUNT 4
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define USE_SPI
 
 #define USE_SPI_DEVICE_1 //ICM20689

src/main/target/LUX_RACE/target.h

@@ -160,6 +160,9 @@
 
 #define USE_SERIAL_4WAY_BLHELI_INTERFACE
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 // IO - assuming 303 in 64pin package, TODO
 #define TARGET_IO_PORTA         0xffff
 #define TARGET_IO_PORTB         0xffff

src/main/target/MOTOLAB/target.h

@@ -61,6 +61,9 @@
 #define USE_UART3
 #define SERIAL_PORT_COUNT       4
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define UART1_TX_PIN            PB6
 #define UART1_RX_PIN            PB7
 

src/main/target/SPRACINGF3NEO/target.h

@@ -72,6 +72,9 @@
 #define UART3_TX_PIN            PB10
 #define UART3_RX_PIN            PB11
 
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
 #define USE_I2C
 #define I2C_DEVICE              (I2CDEV_1) // PB6/SCL, PB7/SDA
 
@@ -179,7 +182,6 @@
 #define HARDWARE_BIND_PLUG
 #define BINDPLUG_PIN            PD2
 
-
 #define USE_SERIAL_4WAY_BLHELI_INTERFACE
 
 // IO - assuming 303 in 64pin package, TODO