From 08cc4b38e3a6bcf0483f8e3d4531812132a3fc84 Mon Sep 17 00:00:00 2001 From: idefixsin Date: Thu, 8 Jan 2015 11:22:46 +0800 Subject: [PATCH] Update Board - Sparky.md --- docs/Board - Sparky.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/Board - Sparky.md b/docs/Board - Sparky.md index af8c89bc7..22e0f492b 100644 --- a/docs/Board - Sparky.md +++ b/docs/Board - Sparky.md @@ -48,6 +48,7 @@ Press: "S19 or Hex.." Go to the folder where you saved the cleanflight_SPARKY.hex file, select it and press open (you might need to change the filetype in the DfuSE explorer window to "hex Files (*.hex)" to be able to see the file Press: "Generate" and select the .dfu output file and location If all worked well you should see " Success for 'Image for lternate Setting 00 (ST..)'!" + ``` Put the device into DFU mode by powering on the sparky with the bootloader pins temporarily bridged. The only light that should come on is the blue PWR led. @@ -70,6 +71,7 @@ Press "Choose.." at the bootom of the window and select the .dfu file created in "File correctly loaded" should appear in the status bar Press "Upgrade" and confirm with "Yes" The status bar will show the upload progress and confirm that the upload is complete at the end + ``` Disconnect and reconnect the board from USB and continue to configure it via the Cleanflight configurator as per normal