ADD CLRACINGF7
This commit is contained in:
Cheng Lin
parent
f5d226d62f
commit
1190482469
|
|
@ -0,0 +1,14 @@
|
|||
MCU: STM32F722RE
|
||||
IMU: MPU-6000
|
||||
IMU Interrupt: yes
|
||||
BARO: NO
|
||||
VCP: YES
|
||||
Hardware UARTS:
|
||||
OSD: uses a AB7456 chip
|
||||
Blackbox: SD Card
|
||||
PPM/UART NOT Shared: YES
|
||||
Battery Voltage Sensor: 10:1
|
||||
Current sensor: 0.5 mOhm, 250 Current scale in the setting
|
||||
Integrated Voltage Regulator: 1.2A 5v
|
||||
Integrated Volrage Regulator: 1.2A 7.8V for clean vtx and camera power
|
||||
120A Current sensing PDB and 150A burst current for 10S on the current sensing Resistor
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/io.h"
|
||||
|
||||
#include "drivers/dma.h"
|
||||
#include "drivers/timer.h"
|
||||
#include "drivers/timer_def.h"
|
||||
|
||||
// DSHOT will work for motor 1-6.
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
|
||||
DEF_TIM(TIM4, CH3, PB8, TIM_USE_PPM | TIM_USE_LED, TIMER_INPUT_ENABLED, 0), // PPM -DMA1_ST7
|
||||
|
||||
DEF_TIM(TIM2, CH4, PA3, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 1), // PWM1 - DMA1_ST6
|
||||
DEF_TIM(TIM8, CH3, PC8, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 1), // PWM2 - DMA2_ST2
|
||||
DEF_TIM(TIM2, CH3, PA2, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 0), // PWM3 - DMA1_ST1
|
||||
DEF_TIM(TIM3, CH4, PC9, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 0), // PWM4 - DMA1_ST2
|
||||
DEF_TIM(TIM1, CH1, PA8, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 2), // PWM5 - DMA2_ST3
|
||||
DEF_TIM(TIM4, CH1, PB6, TIM_USE_MOTOR, TIMER_OUTPUT_ENABLED, 0), // PWM6 - DMA1_ST0
|
||||
|
||||
DEF_TIM(TIM1, CH3N, PB1, TIM_USE_MOTOR | TIM_USE_LED, TIMER_OUTPUT_ENABLED | TIMER_OUTPUT_INVERTED, 0), // S5_OUT - DMA2_ST6
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,135 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#define TARGET_BOARD_IDENTIFIER "CLR7"
|
||||
|
||||
#define USBD_PRODUCT_STRING "CL_RACING F7"
|
||||
|
||||
#define LED0 PB0
|
||||
#define BEEPER PB4
|
||||
#define BEEPER_INVERTED
|
||||
|
||||
#define MPU6000_CS_PIN PA4
|
||||
#define MPU6000_SPI_INSTANCE SPI1
|
||||
#define ACC
|
||||
#define USE_ACC_SPI_MPU6000
|
||||
#define GYRO
|
||||
#define USE_GYRO_SPI_MPU6000
|
||||
|
||||
// MPU6000 interrupts
|
||||
#define USE_EXTI
|
||||
#define MPU_INT_EXTI PC4
|
||||
#define USE_MPU_DATA_READY_SIGNAL
|
||||
#define GYRO_MPU6000_ALIGN CW0_DEG
|
||||
#define ACC_MPU6000_ALIGN CW0_DEG
|
||||
|
||||
#define OSD
|
||||
#define USE_MAX7456
|
||||
#define MAX7456_SPI_INSTANCE SPI3
|
||||
#define MAX7456_SPI_CS_PIN PA15
|
||||
#define MAX7456_SPI_CLK (SPI_CLOCK_STANDARD*2)
|
||||
#define MAX7456_RESTORE_CLK (SPI_CLOCK_FAST)
|
||||
|
||||
#define USE_SDCARD
|
||||
#define SDCARD_DETECT_PIN PB7
|
||||
#define SDCARD_SPI_INSTANCE SPI2
|
||||
#define SDCARD_SPI_CS_PIN SPI2_NSS_PIN
|
||||
|
||||
#define SDCARD_SPI_INITIALIZATION_CLOCK_DIVIDER 256 // 422kHz
|
||||
// Divide to under 25MHz for normal operation:
|
||||
#define SDCARD_SPI_FULL_SPEED_CLOCK_DIVIDER 8 // 27MHz
|
||||
|
||||
#define SDCARD_DMA_CHANNEL_TX DMA1_Stream4
|
||||
#define SDCARD_DMA_CHANNEL_TX_COMPLETE_FLAG DMA_FLAG_TCIF1_5
|
||||
#define SDCARD_DMA_CLK RCC_AHB1Periph_DMA2
|
||||
#define SDCARD_DMA_CHANNEL DMA_CHANNEL_0
|
||||
|
||||
|
||||
#define USE_VCP
|
||||
#define USE_UART1
|
||||
#define UART1_RX_PIN PA10
|
||||
#define UART1_TX_PIN PA9
|
||||
|
||||
#define USE_UART3
|
||||
#define UART3_RX_PIN PB11
|
||||
#define UART3_TX_PIN PB10
|
||||
|
||||
#define USE_UART4
|
||||
#define UART4_RX_PIN PA1
|
||||
#define UART4_TX_PIN PA0
|
||||
|
||||
#define USE_UART6
|
||||
#define UART6_RX_PIN PC7
|
||||
#define UART6_TX_PIN PC6
|
||||
|
||||
#define SERIAL_PORT_COUNT 5
|
||||
|
||||
#define USE_I2C
|
||||
|
||||
#define USE_SPI
|
||||
#define USE_SPI_DEVICE_1
|
||||
#define USE_SPI_DEVICE_2
|
||||
#define USE_SPI_DEVICE_3
|
||||
|
||||
#define SPI1_NSS_PIN PA4
|
||||
#define SPI1_SCK_PIN PA5
|
||||
#define SPI1_MISO_PIN PA6
|
||||
#define SPI1_MOSI_PIN PA7
|
||||
|
||||
#define SPI2_NSS_PIN PB12
|
||||
#define SPI2_SCK_PIN PB13
|
||||
#define SPI2_MISO_PIN PB14
|
||||
#define SPI2_MOSI_PIN PB15
|
||||
|
||||
#define SPI3_NSS_PIN PA15
|
||||
#define SPI3_SCK_PIN PC10
|
||||
#define SPI3_MISO_PIN PC11
|
||||
#define SPI3_MOSI_PIN PC12
|
||||
|
||||
|
||||
#define USE_ADC
|
||||
#define BOARD_HAS_VOLTAGE_DIVIDER
|
||||
#define BOARD_HAS_CURRENT_SENSOR
|
||||
#define CURRENT_METER_ADC_PIN PC1
|
||||
#define VBAT_ADC_PIN PC2
|
||||
#define RSSI_ADC_PIN PC3
|
||||
|
||||
#define CURRENT_METER_SCALE_DEFAULT 250 // 3/120A = 25mv/A
|
||||
|
||||
// LED strip configuration.
|
||||
#define LED_STRIP
|
||||
#define SPEKTRUM_BIND_PIN UART6_RX_PIN
|
||||
#define BINDPLUG_PIN PB2
|
||||
|
||||
#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
|
||||
|
||||
#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
|
||||
#define SERIALRX_UART SERIAL_PORT_USART6
|
||||
|
||||
#define TELEMETRY_UART SERIAL_PORT_USART1
|
||||
|
||||
#define USE_SERIAL_4WAY_BLHELI_INTERFACE
|
||||
|
||||
#define TARGET_IO_PORTA 0xffff
|
||||
#define TARGET_IO_PORTB 0xffff
|
||||
#define TARGET_IO_PORTC 0xffff
|
||||
#define TARGET_IO_PORTD (BIT(2))
|
||||
|
||||
#define USABLE_TIMER_CHANNEL_COUNT 9
|
||||
#define USED_TIMERS ( TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(8) )
|
||||
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
F7X2RE_TARGETS += $(TARGET)
|
||||
FEATURES += SDCARD VCP
|
||||
|
||||
TARGET_SRC = \
|
||||
drivers/accgyro/accgyro_spi_mpu6000.c\
|
||||
drivers/max7456.c
|
||||
Loading…
Reference in New Issue