Update Safety.md
Added note to direct user to other important docs
This commit is contained in:
parent
e43c4b90b9
commit
145c761567
|
@ -4,5 +4,14 @@ As many can attest, multirotors and RC models in general can be very dangerous,
|
|||
* **NEVER** arm your model with propellers fitted unless you intend to fly!
|
||||
* **Always** remove your propellers if you are setting up for the first time, flashing firmware, or if in any doubt.
|
||||
|
||||
## Before installing the Flight Controller in your craft
|
||||
|
||||
Please consult the Cli.md, Controls.md, Failsafe.md and Modes.md, documentations for further important information and familiarisation with CleanFlight's terminolgies.
|
||||
|
||||
You are highly advised to use the Receiver tab in CleanFlight Configurator, making sure your Rx channel values are centered at 1500 (1520 for Futaba RC) and Min/Max values are reached when controls are operated.
|
||||
The referenced values for each channel, have marked impact on the operation of Flight Controller and its Flight Modes.
|
||||
|
||||
You may have to adjust your channel endpoints and trims/sub-trims, on your RC transmitter, to achieve the expected values.
|
||||
|
||||
## Feature MOTOR_STOP
|
||||
The default Cleanflight configuration has the MOTOR_STOP feature DISABLED by default. What this means is that as soon as the controller is armed, the propellers *WILL* begin spinning at low speed. It is recommended that this setting be retained as it provides a good visual indication that the craft is armed. You can read more about arming and setting the MOTOR_STOP feature if desired in the relevant sections of the manual.
|
||||
|
|
Loading…
Reference in New Issue