rusefi
/
atbetaflight
mirror of https://github.com/rusefi/atbetaflight.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Fix documentation links

This commit is contained in:
Michael Jakob 2015-05-22 11:53:42 +02:00
parent e3e55c64eb
commit 196a0f7369
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Board - AlienWii32.md
View File

@ -25,7 +25,7 @@ Here are the hardware specifications:
set serialrx_provider = 1 (0 for 1024bit, 1 for 2048bit)
set spektrum_sat_bind = 5
For more detail of the different bind modes please refer the “Spektrum bind.md” document
For more detail of the different bind modes please refer the [Spektrum Bind](Spektrum bind.md) document
Deltang receivers in serial mode will work like any other Spektrum satellite receiver (10bit, 22ms) only the bind process will be different.
@ -35,4 +35,4 @@ The pin layout for the ALIENWIIF1 is very similar to NAZE32 or the related clone
The AlienWii32 F1 board can be flashed like the Naze board or the related clones. All the different methods will work in the same way.
The AlienWii32 F3 board needs to be flashed via the USB port in DFU mode. Flashing via the Cleanflight GUI is not possible yet. The DFU mode can be activated via setting the BOOT0 jumper during power on of the board. The second method is to connect with an terminal program (i.e. Putty) to the board and enter the character "R" immediately after connecting. Details about the flashing process can be found in the related section of the Sparky documentation. The BOOT0 jumper should be removed and the board needs to be repowerd after firmware flashing. Please be aware, during reboot of the AlienWii F3 board, the GUI will disconnect and an manual reconnect is required.
The AlienWii32 F3 board needs to be flashed via the USB port in DFU mode. Flashing via the Cleanflight GUI is not possible yet. The DFU mode can be activated via setting the BOOT0 jumper during power on of the board. The second method is to connect with an terminal program (i.e. Putty) to the board and enter the character "R" immediately after connecting. Details about the flashing process can be found in the related section of the [Sparky](Board - Sparky.md) documentation. The BOOT0 jumper should be removed and the board needs to be repowerd after firmware flashing. Please be aware, during reboot of the AlienWii F3 board, the GUI will disconnect and an manual reconnect is required.