Merge pull request #825 from tianbin4279/betaflight
Add target for AIORACERF3
This commit is contained in:
borisbstyle
GitHub
commit
33b86fcd85
|
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/io.h"
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// PPM / UART2 RX
|
||||
{ TIM8, IO_TAG(PA15), TIM_Channel_1, TIM8_CC_IRQn, 0, IOCFG_AF_PP_PD, GPIO_AF_2 }, // PPM
|
||||
{ TIM3, IO_TAG(PB1), TIM_Channel_4, TIM3_IRQn, 1, IOCFG_AF_PP, GPIO_AF_2 }, // PWM1
|
||||
{ TIM3, IO_TAG(PA7), TIM_Channel_2, TIM3_IRQn, 1, IOCFG_AF_PP, GPIO_AF_2 }, // PWM2
|
||||
{ TIM15, IO_TAG(PA2), TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, IOCFG_AF_PP, GPIO_AF_9 }, // PWM3
|
||||
{ TIM2, IO_TAG(PA1), TIM_Channel_2, TIM2_IRQn, 1, IOCFG_AF_PP, GPIO_AF_1 }, // PWM4
|
||||
{ TIM3, IO_TAG(PB0), TIM_Channel_3, TIM3_IRQn, 1, IOCFG_AF_PP, GPIO_AF_2 }, // PWM5
|
||||
{ TIM3, IO_TAG(PA6), TIM_Channel_1, TIM3_IRQn, 1, IOCFG_AF_PP, GPIO_AF_2 }, // PWM6
|
||||
{ TIM15, IO_TAG(PA3), TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, IOCFG_AF_PP, GPIO_AF_9 }, // PWM7
|
||||
{ TIM2, IO_TAG(PA0), TIM_Channel_1, TIM2_IRQn, 1, IOCFG_AF_PP, GPIO_AF_1 }, // PWM8
|
||||
{ TIM2, IO_TAG(PB10), TIM_Channel_3, TIM2_IRQn, 1, IOCFG_AF_PP, GPIO_AF_1 }, // UART3_TX (AF7)
|
||||
{ TIM2, IO_TAG(PB11), TIM_Channel_4, TIM2_IRQn, 1, IOCFG_AF_PP, GPIO_AF_1 }, // UART3_RX (AF7)
|
||||
{ TIM1, IO_TAG(PA8), TIM_Channel_1, TIM1_CC_IRQn, 1, IOCFG_AF_PP, GPIO_AF_6 }, //LED_STRIP
|
||||
};
|
||||
|
|
@ -0,0 +1,164 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define TARGET_BOARD_IDENTIFIER "ARF3"
|
||||
|
||||
#define CONFIG_FASTLOOP_PREFERRED_ACC ACC_DEFAULT
|
||||
|
||||
#define LED0 PB8
|
||||
|
||||
#define BEEPER PC15
|
||||
#define BEEPER_INVERTED
|
||||
|
||||
#define USABLE_TIMER_CHANNEL_COUNT 12 // PPM, 8 PWM, UART3 RX/TX, LED Strip
|
||||
|
||||
#define EXTI15_10_CALLBACK_HANDLER_COUNT 2 // MPU_INT, SDCardDetect
|
||||
|
||||
#define USE_EXTI
|
||||
#define MPU_INT_EXTI PC13
|
||||
#define USE_MPU_DATA_READY_SIGNAL
|
||||
#define ENSURE_MPU_DATA_READY_IS_LOW
|
||||
|
||||
#define USE_MAG_DATA_READY_SIGNAL
|
||||
#define ENSURE_MAG_DATA_READY_IS_HIGH
|
||||
|
||||
|
||||
#define GYRO
|
||||
#define USE_GYRO_SPI_MPU6500
|
||||
|
||||
#define ACC
|
||||
#define USE_ACC_SPI_MPU6500
|
||||
|
||||
#define ACC_MPU6500_ALIGN CW180_DEG
|
||||
#define GYRO_MPU6500_ALIGN CW180_DEG
|
||||
|
||||
#define BARO
|
||||
#define USE_BARO_BMP280
|
||||
|
||||
#define MAG
|
||||
#define USE_MAG_AK8963
|
||||
//#define USE_MAG_HMC5883 // External
|
||||
|
||||
#define MAG_AK8963_ALIGN CW90_DEG_FLIP
|
||||
|
||||
//#define SONAR
|
||||
|
||||
#define USB_IO
|
||||
|
||||
#define USE_VCP
|
||||
#define USE_UART1
|
||||
#define USE_UART2
|
||||
#define USE_UART3
|
||||
#define SERIAL_PORT_COUNT 4
|
||||
|
||||
#define UART1_TX_PIN PA9
|
||||
#define UART1_RX_PIN PA10
|
||||
|
||||
#define UART2_TX_PIN PA14 // PA14 / SWCLK
|
||||
#define UART2_RX_PIN PA15
|
||||
|
||||
#define UART3_TX_PIN PB10 // PB10 (AF7)
|
||||
#define UART3_RX_PIN PB11 // PB11 (AF7)
|
||||
|
||||
#define USE_I2C
|
||||
#define I2C_DEVICE (I2CDEV_1) // PB6/SCL, PB7/SDA
|
||||
|
||||
#define USE_SPI
|
||||
#define USE_SPI_DEVICE_1 // PB9,3,4,5 on AF5 SPI1 (MPU)
|
||||
#define USE_SPI_DEVICE_2 // PB12,13,14,15 on AF5 SPI2 (SDCard)
|
||||
|
||||
#define SPI1_NSS_PIN PB9
|
||||
#define SPI1_SCK_PIN PB3
|
||||
#define SPI1_MISO_PIN PB4
|
||||
#define SPI1_MOSI_PIN PB5
|
||||
|
||||
#define SPI2_NSS_PIN PB12
|
||||
#define SPI2_SCK_PIN PB13
|
||||
#define SPI2_MISO_PIN PB14
|
||||
#define SPI2_MOSI_PIN PB15
|
||||
|
||||
#define USE_SDCARD
|
||||
#define USE_SDCARD_SPI2
|
||||
|
||||
#define SDCARD_DETECT_INVERTED
|
||||
|
||||
#define SDCARD_DETECT_PIN PC14
|
||||
#define SDCARD_SPI_INSTANCE SPI2
|
||||
#define SDCARD_SPI_CS_PIN SPI2_NSS_PIN
|
||||
|
||||
// SPI2 is on the APB1 bus whose clock runs at 36MHz. Divide to under 400kHz for init:
|
||||
#define SDCARD_SPI_INITIALIZATION_CLOCK_DIVIDER 128
|
||||
// Divide to under 25MHz for normal operation:
|
||||
#define SDCARD_SPI_FULL_SPEED_CLOCK_DIVIDER 2
|
||||
|
||||
// Note, this is the same DMA channel as UART1_RX. Luckily we don't use DMA for USART Rx.
|
||||
#define SDCARD_DMA_CHANNEL_TX DMA1_Channel5
|
||||
#define SDCARD_DMA_CHANNEL_TX_COMPLETE_FLAG DMA1_FLAG_TC5
|
||||
|
||||
#define MPU6500_CS_PIN PB9
|
||||
#define MPU6500_SPI_INSTANCE SPI1
|
||||
|
||||
#define BOARD_HAS_VOLTAGE_DIVIDER
|
||||
#define USE_ADC
|
||||
#define ADC_INSTANCE ADC2
|
||||
#define VBAT_ADC_PIN PA5
|
||||
#define CURRENT_METER_ADC_PIN PA4
|
||||
#define RSSI_ADC_PIN PB2
|
||||
|
||||
#define LED_STRIP
|
||||
#define USE_LED_STRIP_ON_DMA1_CHANNEL2
|
||||
#define WS2811_PIN PA8
|
||||
#define WS2811_TIMER TIM1
|
||||
#define WS2811_DMA_CHANNEL DMA1_Channel2
|
||||
#define WS2811_IRQ DMA1_Channel2_IRQn
|
||||
#define WS2811_DMA_TC_FLAG DMA1_FLAG_TC2
|
||||
#define WS2811_DMA_HANDLER_IDENTIFER DMA1_CH2_HANDLER
|
||||
|
||||
#define TRANSPONDER
|
||||
#define TRANSPONDER_GPIO GPIOA
|
||||
#define TRANSPONDER_GPIO_AHB_PERIPHERAL RCC_AHBPeriph_GPIOA
|
||||
#define TRANSPONDER_GPIO_AF GPIO_AF_6
|
||||
#define TRANSPONDER_PIN GPIO_Pin_8
|
||||
#define TRANSPONDER_PIN_SOURCE GPIO_PinSource8
|
||||
#define TRANSPONDER_TIMER TIM1
|
||||
#define TRANSPONDER_TIMER_APB2_PERIPHERAL RCC_APB2Periph_TIM1
|
||||
#define TRANSPONDER_DMA_CHANNEL DMA1_Channel2
|
||||
#define TRANSPONDER_IRQ DMA1_Channel2_IRQn
|
||||
#define TRANSPONDER_DMA_TC_FLAG DMA1_FLAG_TC2
|
||||
#define TRANSPONDER_DMA_HANDLER_IDENTIFER DMA1_CH2_HANDLER
|
||||
|
||||
#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
|
||||
|
||||
#define DEFAULT_RX_FEATURE FEATURE_RX_PPM
|
||||
#define DEFAULT_FEATURES (FEATURE_TRANSPONDER | FEATURE_BLACKBOX | FEATURE_RSSI_ADC | FEATURE_CURRENT_METER | FEATURE_TELEMETRY)
|
||||
|
||||
#define SPEKTRUM_BIND
|
||||
// USART3,
|
||||
#define BIND_PIN PB11
|
||||
|
||||
#define USE_SERIAL_4WAY_BLHELI_INTERFACE
|
||||
|
||||
// IO - stm32f303cc in 48pin package
|
||||
#define TARGET_IO_PORTA 0xffff
|
||||
#define TARGET_IO_PORTB 0xffff
|
||||
#define TARGET_IO_PORTC (BIT(13)|BIT(14)|BIT(15))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(8) | TIM_N(15))
|
||||
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
F3_TARGETS += $(TARGET)
|
||||
FEATURES = VCP SDCARD
|
||||
|
||||
TARGET_SRC = \
|
||||
drivers/accgyro_mpu.c \
|
||||
drivers/accgyro_mpu6500.c \
|
||||
drivers/accgyro_spi_mpu6500.c \
|
||||
drivers/barometer_bmp280.c \
|
||||
drivers/compass_ak8963.c \
|
||||
drivers/light_ws2811strip.c \
|
||||
drivers/light_ws2811strip_stm32f30x.c \
|
||||
drivers/serial_usb_vcp.c \
|
||||
drivers/transponder_ir.c \
|
||||
drivers/transponder_ir_stm32f30x.c \
|
||||
io/transponder_ir.c
|
||||
|
||||
Loading…
Reference in New Issue