diff --git a/src/main/drivers/pwm_mapping.c b/src/main/drivers/pwm_mapping.c index 2e424a8af..062f2ca50 100755 --- a/src/main/drivers/pwm_mapping.c +++ b/src/main/drivers/pwm_mapping.c @@ -137,234 +137,6 @@ const uint16_t airPWM[] = { #endif -#if defined(COLIBRI_RACE) || defined(LUX_RACE) -const uint16_t multiPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - 0xFFFF -}; - -const uint16_t multiPWM[] = { - // prevent crashing, but do nothing - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - 0xFFFF -}; - -const uint16_t airPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - 0xFFFF -}; - -const uint16_t airPWM[] = { - // prevent crashing, but do nothing - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed - 0xFFFF -}; -#endif - -#if defined(SPARKY) || defined(ALIENFLIGHTF3) -const uint16_t multiPPM[] = { - PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input - - PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1 - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17 - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 - 0xFFFF -}; - -const uint16_t multiPWM[] = { - PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t airPPM[] = { - // TODO - 0xFFFF -}; - -const uint16_t airPWM[] = { - // TODO - 0xFFFF -}; -#endif - - -#ifdef SPRACINGF3EVO -const uint16_t multiPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t multiPWM[] = { - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t airPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 - PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 - PWM5 | (MAP_TO_SERVO_OUTPUT << 8), - PWM6 | (MAP_TO_SERVO_OUTPUT << 8), - PWM7 | (MAP_TO_SERVO_OUTPUT << 8), - PWM8 | (MAP_TO_SERVO_OUTPUT << 8), - PWM9 | (MAP_TO_SERVO_OUTPUT << 8), - PWM10 | (MAP_TO_SERVO_OUTPUT << 8), - PWM11 | (MAP_TO_SERVO_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t airPWM[] = { - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 - PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 - PWM5 | (MAP_TO_SERVO_OUTPUT << 8), - PWM6 | (MAP_TO_SERVO_OUTPUT << 8), - PWM7 | (MAP_TO_SERVO_OUTPUT << 8), - PWM8 | (MAP_TO_SERVO_OUTPUT << 8), - PWM9 | (MAP_TO_SERVO_OUTPUT << 8), - PWM10 | (MAP_TO_SERVO_OUTPUT << 8), - PWM11 | (MAP_TO_SERVO_OUTPUT << 8), - 0xFFFF -}; -#endif - -#ifdef SPRACINGF3MINI -const uint16_t multiPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t multiPWM[] = { - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), - PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), - 0xFFFF -}; - -const uint16_t airPPM[] = { - PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 - PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 - PWM5 | (MAP_TO_SERVO_OUTPUT << 8), - PWM6 | (MAP_TO_SERVO_OUTPUT << 8), - PWM7 | (MAP_TO_SERVO_OUTPUT << 8), - PWM8 | (MAP_TO_SERVO_OUTPUT << 8), - PWM9 | (MAP_TO_SERVO_OUTPUT << 8), - PWM10 | (MAP_TO_SERVO_OUTPUT << 8), - PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8 - 0xFFFF -}; - -const uint16_t airPWM[] = { - PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 - PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 - PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 - PWM5 | (MAP_TO_SERVO_OUTPUT << 8), - PWM6 | (MAP_TO_SERVO_OUTPUT << 8), - PWM7 | (MAP_TO_SERVO_OUTPUT << 8), - PWM8 | (MAP_TO_SERVO_OUTPUT << 8), - PWM9 | (MAP_TO_SERVO_OUTPUT << 8), - PWM10 | (MAP_TO_SERVO_OUTPUT << 8), - PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8 - 0xFFFF -}; -#endif - - const uint16_t * const hardwareMaps[] = { multiPWM, multiPPM, diff --git a/src/main/drivers/timer.c b/src/main/drivers/timer.c index 6e0b6a318..86a871ae8 100755 --- a/src/main/drivers/timer.c +++ b/src/main/drivers/timer.c @@ -93,32 +93,6 @@ const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { #endif -#if defined(COLIBRI_RACE) || defined(LUX_RACE) -const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { - { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8 - - { TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6 - { TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7 - { TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8 - { TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9 - - { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0 - { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1 - { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2 - { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3 - - { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14 - { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15 -}; - -#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15)) - -#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) -#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15) -#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC) - -#endif - #ifdef CHEBUZZF3 const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { // INPUTS CH1-8 @@ -179,117 +153,6 @@ const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { #endif -#if defined(SPARKY) || defined(ALIENFLIGHTF3) -const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { - // - // 6 x 3 pin headers - // - - { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2 - { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1 - { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR - { TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N - { TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1 - { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1 - - // - // 6 pin header - // - - // PWM7-10 - { TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N - { TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1 - { TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2 - { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N - - // - // PPM PORT - Also USART2 RX (AF5) - // - - { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 - //{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 - - // USART3 RX/TX - // RX conflicts with PPM port - //{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11 - //{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12 - -}; - -#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17)) - -#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) -#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17) -#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) - -#endif - - -#if defined(SPRACINGF3EVO) -const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { - // PPM / UART2 RX - { TIM8, GPIOA, Pin_15, TIM_Channel_1, TIM8_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_2}, // PPM - - { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM1 - { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM2 - { TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM3 - { TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM4 - { TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - { TIM3, GPIOA, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM6 - { TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM7 - { TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM8 - - // UART3 RX/TX - { TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // RC_CH4 - PB10 - *TIM2_CH3, USART3_TX (AF7) - { TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // RC_CH3 - PB11 - *TIM2_CH4, USART3_RX (AF7) - - // IR / LED Strip Pad - { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP -}; - -#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(8) | TIM_N(15)) - -#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) -#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM8 | RCC_APB2Periph_TIM15) -#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) - -#endif - -#if defined(SPRACINGF3MINI) -const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { - // PPM Pad -#ifdef SPRACINGF3MINI_MKII_REVA - { TIM3, GPIOB, Pin_5, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource5, GPIO_AF_2}, // PPM - PB5 - // PB4 / TIM3 CH1 is connected to USBPresent -#else - { TIM3, GPIOB, Pin_4, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PPM - PB4 - // PB5 / TIM3 CH2 is connected to USBPresent -#endif - - { TIM16, GPIOA, Pin_6, TIM_Channel_1, TIM1_UP_TIM16_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_1}, // PWM1 - PA6 - { TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM2 - PA7 - { TIM4, GPIOB, Pin_8, TIM_Channel_3, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PWM3 - PB8 - { TIM4, GPIOB, Pin_9, TIM_Channel_4, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM4 - PB9 - { TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM5 - PA2 - { TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM6 - PA3 - { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM7 - PA0 - { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM8 - PA1 - - // UART3 RX/TX - { TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // PWM9 - PB10 - TIM2_CH3 / USART3_TX (AF7) - { TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // PWM10 - PB11 - TIM2_CH4 / USART3_RX (AF7) - - // LED Strip Pad - { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP -}; - -#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(15) | TIM_N(16) |TIM_N(17)) - -#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | RCC_APB1Periph_TIM4) -#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM16 | RCC_APB2Periph_TIM17) -#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) - -#endif #define USED_TIMER_COUNT BITCOUNT(USED_TIMERS) diff --git a/src/main/target/ALIENFLIGHTF3/target.c b/src/main/target/ALIENFLIGHTF3/target.c new file mode 100644 index 000000000..70783afd7 --- /dev/null +++ b/src/main/target/ALIENFLIGHTF3/target.c @@ -0,0 +1,84 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input + + PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1 + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17 + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 + 0xFFFF +}; + +const uint16_t multiPWM[] = { + PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t airPPM[] = { + // TODO + 0xFFFF +}; + +const uint16_t airPWM[] = { + // TODO + 0xFFFF +}; + + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + // + // 6 x 3 pin headers + // + + { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2 + { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1 + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR + { TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N + { TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1 + { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1 + + // + // 6 pin header + // + + // PWM7-10 + { TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N + { TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1 + { TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N + + // + // PPM PORT - Also USART2 RX (AF5) + // + + { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 + //{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 + + // USART3 RX/TX + // RX conflicts with PPM port + //{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11 + //{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12 + +}; + diff --git a/src/main/target/ALIENFLIGHTF3/target.h b/src/main/target/ALIENFLIGHTF3/target.h index 0aa0e83e9..ef803639d 100644 --- a/src/main/target/ALIENFLIGHTF3/target.h +++ b/src/main/target/ALIENFLIGHTF3/target.h @@ -150,3 +150,11 @@ #define TARGET_IO_PORTC 0xffff #define TARGET_IO_PORTD (BIT(2)) #define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) + diff --git a/src/main/target/COLIBRI_RACE/target.c b/src/main/target/COLIBRI_RACE/target.c new file mode 100644 index 000000000..00ab273c0 --- /dev/null +++ b/src/main/target/COLIBRI_RACE/target.c @@ -0,0 +1,84 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t multiPWM[] = { + // prevent crashing, but do nothing + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t airPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t airPWM[] = { + // prevent crashing, but do nothing + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8 + + { TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6 + { TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7 + { TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8 + { TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9 + + { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1 + { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2 + { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3 + + { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14 + { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15 +}; + diff --git a/src/main/target/COLIBRI_RACE/target.h b/src/main/target/COLIBRI_RACE/target.h index 6d6bf2e83..417703115 100755 --- a/src/main/target/COLIBRI_RACE/target.h +++ b/src/main/target/COLIBRI_RACE/target.h @@ -177,3 +177,10 @@ #define TARGET_IO_PORTC 0xffff #define TARGET_IO_PORTD (BIT(2)) #define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC) + diff --git a/src/main/target/LUX_RACE/target.c b/src/main/target/LUX_RACE/target.c new file mode 100644 index 000000000..00ab273c0 --- /dev/null +++ b/src/main/target/LUX_RACE/target.c @@ -0,0 +1,84 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t multiPWM[] = { + // prevent crashing, but do nothing + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t airPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const uint16_t airPWM[] = { + // prevent crashing, but do nothing + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed + 0xFFFF +}; + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8 + + { TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6 + { TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7 + { TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8 + { TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9 + + { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1 + { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2 + { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3 + + { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14 + { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15 +}; + diff --git a/src/main/target/LUX_RACE/target.h b/src/main/target/LUX_RACE/target.h index 1dac95694..033e151ed 100644 --- a/src/main/target/LUX_RACE/target.h +++ b/src/main/target/LUX_RACE/target.h @@ -147,3 +147,10 @@ #define TARGET_IO_PORTC 0xffff #define TARGET_IO_PORTD (BIT(2)) #define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC) + diff --git a/src/main/target/SPARKY/target.c b/src/main/target/SPARKY/target.c new file mode 100644 index 000000000..70783afd7 --- /dev/null +++ b/src/main/target/SPARKY/target.c @@ -0,0 +1,84 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input + + PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1 + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17 + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3 + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2 + 0xFFFF +}; + +const uint16_t multiPWM[] = { + PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t airPPM[] = { + // TODO + 0xFFFF +}; + +const uint16_t airPWM[] = { + // TODO + 0xFFFF +}; + + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + // + // 6 x 3 pin headers + // + + { TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2 + { TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1 + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR + { TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N + { TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1 + { TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1 + + // + // 6 pin header + // + + // PWM7-10 + { TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N + { TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1 + { TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N + + // + // PPM PORT - Also USART2 RX (AF5) + // + + { TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 + //{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13 + + // USART3 RX/TX + // RX conflicts with PPM port + //{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11 + //{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12 + +}; + diff --git a/src/main/target/SPARKY/target.h b/src/main/target/SPARKY/target.h index 3010b3492..e5bc096ff 100644 --- a/src/main/target/SPARKY/target.h +++ b/src/main/target/SPARKY/target.h @@ -19,6 +19,8 @@ #define TARGET_BOARD_IDENTIFIER "SPKY" // SParKY +#define CONFIG_FASTLOOP_PREFERRED_ACC 1 + #define LED0 PB4 // Blue (Rev 1 & 2) - PB4 #define LED1 PB5 // Green (Rev 1) / Red (Rev 2) - PB5 @@ -156,5 +158,17 @@ // available IO pins (from schematics) -#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15)) -#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)) +//#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15)) +//#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)) +// !!TODO - check following lines are correct +#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15)) +#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(6)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(12)|BIT(13)) +#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) + diff --git a/src/main/target/SPRACINGF3EVO/target.c b/src/main/target/SPRACINGF3EVO/target.c new file mode 100644 index 000000000..62eda81e3 --- /dev/null +++ b/src/main/target/SPRACINGF3EVO/target.c @@ -0,0 +1,87 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t multiPWM[] = { + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t airPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 + PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 + PWM5 | (MAP_TO_SERVO_OUTPUT << 8), + PWM6 | (MAP_TO_SERVO_OUTPUT << 8), + PWM7 | (MAP_TO_SERVO_OUTPUT << 8), + PWM8 | (MAP_TO_SERVO_OUTPUT << 8), + PWM9 | (MAP_TO_SERVO_OUTPUT << 8), + PWM10 | (MAP_TO_SERVO_OUTPUT << 8), + PWM11 | (MAP_TO_SERVO_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t airPWM[] = { + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 + PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 + PWM5 | (MAP_TO_SERVO_OUTPUT << 8), + PWM6 | (MAP_TO_SERVO_OUTPUT << 8), + PWM7 | (MAP_TO_SERVO_OUTPUT << 8), + PWM8 | (MAP_TO_SERVO_OUTPUT << 8), + PWM9 | (MAP_TO_SERVO_OUTPUT << 8), + PWM10 | (MAP_TO_SERVO_OUTPUT << 8), + PWM11 | (MAP_TO_SERVO_OUTPUT << 8), + 0xFFFF +}; + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + // PPM / UART2 RX + { TIM8, GPIOA, Pin_15, TIM_Channel_1, TIM8_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_2}, // PPM + + { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM1 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM2 + { TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM3 + { TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM4 + { TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 + { TIM3, GPIOA, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM6 + { TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM7 + { TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM8 + + // UART3 RX/TX + { TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // RC_CH4 - PB10 - *TIM2_CH3, USART3_TX (AF7) + { TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // RC_CH3 - PB11 - *TIM2_CH4, USART3_RX (AF7) + + // IR / LED Strip Pad + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP +}; + diff --git a/src/main/target/SPRACINGF3EVO/target.h b/src/main/target/SPRACINGF3EVO/target.h index d4e48ee7b..0b65d6b03 100755 --- a/src/main/target/SPRACINGF3EVO/target.h +++ b/src/main/target/SPRACINGF3EVO/target.h @@ -198,3 +198,11 @@ #define TARGET_IO_PORTB 0xffff #define TARGET_IO_PORTC (BIT(13)|BIT(14)|BIT(15)) #define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(8) | TIM_N(15)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM8 | RCC_APB2Periph_TIM15) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB) + diff --git a/src/main/target/SPRACINGF3MINI/target.c b/src/main/target/SPRACINGF3MINI/target.c new file mode 100644 index 000000000..a7df9d0f0 --- /dev/null +++ b/src/main/target/SPRACINGF3MINI/target.c @@ -0,0 +1,93 @@ + +#include +#include + +#include +#include "drivers/pwm_mapping.h" + +const uint16_t multiPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t multiPWM[] = { + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), + PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), + 0xFFFF +}; + +const uint16_t airPPM[] = { + PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 + PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 + PWM5 | (MAP_TO_SERVO_OUTPUT << 8), + PWM6 | (MAP_TO_SERVO_OUTPUT << 8), + PWM7 | (MAP_TO_SERVO_OUTPUT << 8), + PWM8 | (MAP_TO_SERVO_OUTPUT << 8), + PWM9 | (MAP_TO_SERVO_OUTPUT << 8), + PWM10 | (MAP_TO_SERVO_OUTPUT << 8), + PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8 + 0xFFFF +}; + +const uint16_t airPWM[] = { + PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1 + PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2 + PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1 + PWM5 | (MAP_TO_SERVO_OUTPUT << 8), + PWM6 | (MAP_TO_SERVO_OUTPUT << 8), + PWM7 | (MAP_TO_SERVO_OUTPUT << 8), + PWM8 | (MAP_TO_SERVO_OUTPUT << 8), + PWM9 | (MAP_TO_SERVO_OUTPUT << 8), + PWM10 | (MAP_TO_SERVO_OUTPUT << 8), + PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8 + 0xFFFF +}; + +const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = { + // PPM Pad +#ifdef SPRACINGF3MINI_MKII_REVA + { TIM3, GPIOB, Pin_5, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource5, GPIO_AF_2}, // PPM - PB5 + // PB4 / TIM3 CH1 is connected to USBPresent +#else + { TIM3, GPIOB, Pin_4, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PPM - PB4 + // PB5 / TIM3 CH2 is connected to USBPresent +#endif + + { TIM16, GPIOA, Pin_6, TIM_Channel_1, TIM1_UP_TIM16_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_1}, // PWM1 - PA6 + { TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM2 - PA7 + { TIM4, GPIOB, Pin_8, TIM_Channel_3, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PWM3 - PB8 + { TIM4, GPIOB, Pin_9, TIM_Channel_4, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM4 - PB9 + { TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM5 - PA2 + { TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM6 - PA3 + { TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM7 - PA0 + { TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM8 - PA1 + + // UART3 RX/TX + { TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // PWM9 - PB10 - TIM2_CH3 / USART3_TX (AF7) + { TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // PWM10 - PB11 - TIM2_CH4 / USART3_RX (AF7) + + // LED Strip Pad + { TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP +}; + diff --git a/src/main/target/SPRACINGF3MINI/target.h b/src/main/target/SPRACINGF3MINI/target.h index ac19cda41..d53010cb7 100644 --- a/src/main/target/SPRACINGF3MINI/target.h +++ b/src/main/target/SPRACINGF3MINI/target.h @@ -19,6 +19,8 @@ #define TARGET_BOARD_IDENTIFIER "SRFM" +#define CONFIG_FASTLOOP_PREFERRED_ACC 1 + // early prototype had slightly different pin mappings. //#define SPRACINGF3MINI_MKII_REVA @@ -209,3 +211,9 @@ #define TARGET_IO_PORTB 0xffff #define TARGET_IO_PORTC (BIT(13)|BIT(14)|BIT(15)) #define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4)) + +#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(15) | TIM_N(16) |TIM_N(17)) + +#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | RCC_APB1Periph_TIM4) +#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM16 | RCC_APB2Periph_TIM17) +#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)