Merge pull request #9991 from haslinghuis/Upd-Dev-Docs
Updating Ubuntu development docs
This commit is contained in:
commit
57cc267052
|
@ -1,91 +1,56 @@
|
||||||
# Building in Ubuntu
|
# Building in Ubuntu
|
||||||
|
|
||||||
Building for Ubuntu platform is remarkably easy. The only trick to understand is that the Ubuntu toolchain,
|
Building for Ubuntu platform is remarkably easy.
|
||||||
which they are downstreaming from Debian, is not compatible with Betaflight. We suggest that you take an
|
This document is tested and based on the latest Ubuntu 20.04 LTS release.
|
||||||
alternative PPA from Terry Guo, found here:
|
|
||||||
https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded
|
|
||||||
|
|
||||||
This PPA has several compiler versions and platforms available. For many hardware platforms (notably Naze)
|
### Clone betaflight repository and install toolchain
|
||||||
the 4.9.3 compiler will work fine. For some, older compiler 4.8 (notably Sparky) is more appropriate. We
|
|
||||||
suggest you build with 4.9.3 first, and try to see if you can connect to the CLI or run the Configurator.
|
|
||||||
If you cannot, please see the section below for further hints on what you might do.
|
|
||||||
|
|
||||||
Adjust the ARM_SDK_DIR variable in make/tools.mk file with the correct "gcc-arm-none-eabi-xxx" version.
|
|
||||||
|
|
||||||
## Setup GNU ARM Toolchain
|
|
||||||
|
|
||||||
Note specifically the last paragraph of Terry's PPA documentation -- Ubuntu carries its own package for
|
|
||||||
`gcc-arm-none-eabi`, so you'll have to remove it, and then pin the one from the PPA.
|
|
||||||
For your release, you should first remove any older pacakges (from Debian or Ubuntu directly), introduce
|
|
||||||
Terry's PPA, and update:
|
|
||||||
```bash
|
|
||||||
sudo apt-get remove binutils-arm-none-eabi gcc-arm-none-eabi
|
|
||||||
sudo add-apt-repository ppa:team-gcc-arm-embedded/ppa
|
|
||||||
sudo apt-get update
|
|
||||||
```
|
```
|
||||||
|
sudo apt update
|
||||||
For Ubuntu 14.10 (current release, called Utopic Unicorn), you should pin:
|
sudo apt upgrade
|
||||||
```bash
|
sudo apt install build-essential
|
||||||
sudo apt-get install gcc-arm-none-eabi=4.9.3.2014q4-0utopic12
|
git clone https://github.com/betaflight/betaflight.git
|
||||||
```
|
|
||||||
|
|
||||||
For Ubuntu 14.04 (an LTS as of Q1'2015, called Trusty Tahr), you should pin:
|
|
||||||
```bash
|
|
||||||
sudo apt-get install gcc-arm-none-eabi=4.9.3.2014q4-0trusty12
|
|
||||||
```
|
|
||||||
|
|
||||||
For Ubuntu 12.04 (previous LTS, called Precise Penguin), you should pin:
|
|
||||||
```bash
|
|
||||||
sudo apt-get install gcc-arm-none-eabi=4.9.3.2014q4-0precise12
|
|
||||||
```
|
|
||||||
|
|
||||||
## Building on Ubuntu
|
|
||||||
|
|
||||||
After the ARM toolchain from Terry is installed, you should be able to build from source.
|
|
||||||
```bash
|
|
||||||
cd src
|
|
||||||
git clone git@github.com:betaflight/betaflight.git
|
|
||||||
cd betaflight
|
cd betaflight
|
||||||
make TARGET=NAZE
|
make arm_sdk_install
|
||||||
```
|
```
|
||||||
|
|
||||||
You'll see a set of files being compiled, and finally linked, yielding both an ELF and then a HEX:
|
### Updating and Rebuilding Firmware
|
||||||
|
|
||||||
|
Navigate to your local betaflight repository and use the following steps to pull the latest changes and rebuild your version of betaflight:
|
||||||
|
|
||||||
```
|
```
|
||||||
...
|
|
||||||
arm-none-eabi-size ./obj/main/betaflight_NAZE.elf
|
|
||||||
text data bss dec hex filename
|
|
||||||
97164 320 11080 108564 1a814 ./obj/main/betaflight_NAZE.elf
|
|
||||||
arm-none-eabi-objcopy -O ihex --set-start 0x8000000 obj/main/betaflight_NAZE.elf obj/betaflight_NAZE.hex
|
|
||||||
$ ls -la obj/betaflight_NAZE.hex
|
|
||||||
-rw-rw-r-- 1 pim pim 274258 Jan 12 21:45 obj/betaflight_NAZE.hex
|
|
||||||
```
|
|
||||||
|
|
||||||
You can use the Betaflight-Configurator to flash the `obj/betaflight_NAZE.hex` file.
|
|
||||||
|
|
||||||
## Bricked/Bad build?
|
|
||||||
|
|
||||||
Users have reported that the 4.9.3 compiler for ARM produces bad builds, for example on the Sparky hardware platform.
|
|
||||||
It is very likely that using an older compiler would be fine -- Terry happens to have also a 4.8 2014q2 build in his
|
|
||||||
PPA - to install this, you can fetch the `.deb` directly:
|
|
||||||
http://ppa.launchpad.net/terry.guo/gcc-arm-embedded/ubuntu/pool/main/g/gcc-arm-none-eabi/
|
|
||||||
|
|
||||||
and use `dpkg` to install:
|
|
||||||
```bash
|
|
||||||
sudo dpkg -i gcc-arm-none-eabi_4-8-2014q2-0saucy9_amd64.deb
|
|
||||||
```
|
|
||||||
|
|
||||||
Make sure to remove `obj/` and `make clean`, before building again.
|
|
||||||
|
|
||||||
## Updating and rebuilding
|
|
||||||
|
|
||||||
Navigate to the local betaflight repository and use the following steps to pull the latest changes and rebuild your version of betaflight:
|
|
||||||
|
|
||||||
```bash
|
|
||||||
cd src/betaflight
|
|
||||||
git reset --hard
|
git reset --hard
|
||||||
git pull
|
git pull
|
||||||
make clean TARGET=NAZE
|
make clean TARGET=MATEKF722
|
||||||
make
|
make TARGET=MATEKF722 [OPTIONS=RANGEFINDER] [DEBUG=DBG]
|
||||||
```
|
```
|
||||||
|
|
||||||
Credit goes to K.C. Budd, AKfreak for testing, and pulsar for doing the long legwork that yielded this very short document.
|
Using the optional OPTIONS parameters you can specify options like RANGEFINDER.
|
||||||
|
Using the optional DEBUG parameter you can specify the debugger.
|
||||||
|
|
||||||
|
You'll see a set of files being compiled, and finally linked, yielding both an ELF and then a HEX.
|
||||||
|
You can use the Betaflight-Configurator to flash the `obj/betaflight_MATEKF722.hex` file.
|
||||||
|
Make sure to remove `obj/` and `make clean`, before building again.
|
||||||
|
|
||||||
|
### Building Betaflight Configurator
|
||||||
|
|
||||||
|
See [Betaflight Configurator Development](https://github.com/betaflight/betaflight-configurator#development) for how to build the Betaflight Configurator.
|
||||||
|
|
||||||
|
### Flashing a target with Betaflight Configurator on Ubuntu 20.04
|
||||||
|
|
||||||
|
In most Linux distributions the user won't have access to serial interfaces by default. Flashing a target requires configuration of usb for dfu mode. To add this access right type the following command in a terminal:
|
||||||
|
|
||||||
|
```
|
||||||
|
sudo usermod -a -G dialout $USER
|
||||||
|
sudo usermod -a -G plugdev $USER
|
||||||
|
sudo apt-get remove modemmanager
|
||||||
|
lsusb
|
||||||
|
(echo '# DFU (Internal bootloader for STM32 MCUs)'
|
||||||
|
echo 'ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="0664", GROUP="plugdev"') | sudo tee /etc/udev/rules.d/45-stdfu-permissions.rules > /dev/null
|
||||||
|
```
|
||||||
|
|
||||||
|
Please log out and log in to active the settings. You should now be able to flash your target using Betaflight Configurator.
|
||||||
|
|
||||||
|
|
||||||
|
Credit goes to K.C. Budd, AKfreak for testing, and pulsar for doing the long legwork that yielded the original content of this document.
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue