diff --git a/src/main/target/KIWIF4/README.md b/src/main/target/KIWIF4/README.md
new file mode 100644
index 000000000..cdc79193b
--- /dev/null
+++ b/src/main/target/KIWIF4/README.md
@@ -0,0 +1,16 @@
+##KIWI F4
+
+Available at: flyinglemon.eu
+
+###Board information:
+
+- CPU - STM32F405RGT6
+- MPU6000 SPI gyro
+- SPI Flash
+- MAX7456 (NO DMA)
+- Build in 5V BEC + 12V BEC + LC filter - board can be powered from main battery
+- RC input: S.BUS with HW inverter, Spektrum
+- Other connectors: RSSI, Current sensor, LED strip, Buzzer, Video IN/Out + LC filter
+- dedicated PDB with current sensor
+- Size: 36mm x 36mm
+
diff --git a/src/main/target/KIWIF4/target.c b/src/main/target/KIWIF4/target.c
new file mode 100644
index 000000000..d5327d97d
--- /dev/null
+++ b/src/main/target/KIWIF4/target.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight. If not, see .
+ */
+
+#include
+
+#include
+#include "drivers/io.h"
+
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+ DEF_TIM(TIM2, CH4, PA3, TIM_USE_MOTOR, 1, 1),
+ DEF_TIM(TIM3, CH3, PB0, TIM_USE_MOTOR, 1, 0),
+ DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 1, 0),
+ DEF_TIM(TIM2, CH3, PA2, TIM_USE_MOTOR, 1, 0),
+ DEF_TIM(TIM4, CH2, PB7, TIM_USE_LED, 0, 0), // LED
+};
diff --git a/src/main/target/KIWIF4/target.h b/src/main/target/KIWIF4/target.h
new file mode 100644
index 000000000..d3b02f787
--- /dev/null
+++ b/src/main/target/KIWIF4/target.h
@@ -0,0 +1,144 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight. If not, see .
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "KIWI"
+#define CONFIG_START_FLASH_ADDRESS (0x08080000) //0x08080000 to 0x080A0000 (FLASH_Sector_8)
+
+#define USBD_PRODUCT_STRING "KIWIF4"
+
+#define LED0 PB5
+#define LED1 PB4
+
+
+#define BEEPER PA8
+
+#define INVERTER PC0 // PC0 used as inverter select GPIO
+#define INVERTER_USART USART1
+
+// MPU6000 interrupts
+#define USE_EXTI
+#define MPU_INT_EXTI PC4
+#define USE_MPU_DATA_READY_SIGNAL
+
+#define MPU6000_CS_PIN PA4
+#define MPU6000_SPI_INSTANCE SPI1
+
+#define GYRO
+
+#define USE_GYRO_SPI_MPU6000
+#define GYRO_MPU6000_ALIGN CW180_DEG
+#define USE_ACC_SPI_MPU6000
+#define ACC_MPU6000_ALIGN CW180_DEG
+
+#define USE_ACC_SPI_MPU6000
+#define ACC_MPU6000_ALIGN CW180_DEG
+
+#define OSD
+#define USE_MAX7456
+#define MAX7456_SPI_INSTANCE SPI2
+#define MAX7456_SPI_CS_PIN PB12
+//#define MAX7456_DMA_CHANNEL_TX DMA1_Stream5
+//#define MAX7456_DMA_CHANNEL_RX DMA1_Stream0
+//#define MAX7456_DMA_IRQ_HANDLER_ID DMA1_ST0_HANDLER
+
+
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_CS_PIN SPI3_NSS_PIN
+#define M25P16_SPI_INSTANCE SPI3
+
+#define USE_VCP
+#define VBUS_SENSING_PIN PC5
+#define VBUS_SENSING_ENABLED
+
+#define USE_UART1
+#define UART1_RX_PIN PA10
+#define UART1_TX_PIN PA9
+#define UART1_AHB1_PERIPHERALS RCC_AHB1Periph_DMA2
+
+#define USE_UART3
+#define UART3_RX_PIN PB11
+#define UART3_TX_PIN PB10
+
+#define USE_UART6
+#define UART6_RX_PIN PC7
+#define UART6_TX_PIN PC6
+
+#define SERIAL_PORT_COUNT 4 //VCP, USART1, USART3, USART6
+
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
+
+#define USE_DSHOT
+
+#define USE_SPI
+
+#define USE_SPI_DEVICE_1
+
+#define USE_SPI_DEVICE_2
+#define SPI2_NSS_PIN PB12
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_SPI_DEVICE_3
+#define SPI3_NSS_PIN PA15
+#define SPI3_SCK_PIN PC10
+#define SPI3_MISO_PIN PC11
+#define SPI3_MOSI_PIN PC12
+
+
+
+/* #define USE_I2C
+#define I2C_DEVICE (I2CDEV_1) // PB6-SCL, PB7-SDA
+#define USE_I2C_PULLUP
+#define I2C1_SCL PB6
+#define I2C1_SDA PB7 */
+
+#define USE_ADC
+#define BOARD_HAS_VOLTAGE_DIVIDER
+#define VBAT_ADC_PIN PC1
+#define RSSI_ADC_PIN PC2
+#define CURRENT_METER_ADC_PIN PC3
+
+#define DEFAULT_FEATURES (FEATURE_VBAT | FEATURE_BLACKBOX)
+#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
+#define SERIALRX_PROVIDER SERIALRX_SBUS
+
+#define LED_STRIP
+
+
+#define SPEKTRUM_BIND
+// USART3 Rx, PB11
+#define BIND_PIN PB11
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD (BIT(2))
+
+#define USABLE_TIMER_CHANNEL_COUNT 12
+
+#define USED_TIMERS ( TIM_N(2) | TIM_N(3) | TIM_N(5) | TIM_N(12) | TIM_N(8) | TIM_N(9) )
+
+#define CMS
+#define USE_MSP_DISPLAYPORT
+
diff --git a/src/main/target/KIWIF4/target.mk b/src/main/target/KIWIF4/target.mk
new file mode 100644
index 000000000..97eca5e62
--- /dev/null
+++ b/src/main/target/KIWIF4/target.mk
@@ -0,0 +1,10 @@
+F405_TARGETS += $(TARGET)
+FEATURES += VCP ONBOARDFLASH
+
+TARGET_SRC = \
+ drivers/accgyro_spi_mpu6000.c \
+ drivers/light_ws2811strip.c \
+ drivers/light_ws2811strip_stm32f4xx.c\
+ drivers/max7456.c \
+ io/osd.c
+