Code formatting and style fixes.
This commit is contained in:
parent
4d572800ee
commit
89d2c3152f
|
@ -1,4 +1,3 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
#ifndef sq
|
||||
|
@ -9,8 +8,7 @@
|
|||
#define M_PI 3.14159265358979323846f
|
||||
#endif /* M_PI */
|
||||
|
||||
#define RADX10 (M_PI / 1800.0f) // 0.001745329252f
|
||||
#define RAD (M_PI / 180.0f)
|
||||
#define RADX10 (M_PI / 1800.0f) // 0.001745329252f
#define RAD (M_PI / 180.0f)
|
||||
|
||||
#define DEG2RAD(degrees) (degrees * RAD)
|
||||
|
||||
|
|
|
@ -12,7 +12,6 @@
|
|||
#include "accgyro_common.h"
|
||||
#include "accgyro_l3g4200d.h"
|
||||
|
||||
|
||||
// L3G4200D, Standard address 0x68
|
||||
#define L3G4200D_ADDRESS 0x68
|
||||
#define L3G4200D_ID 0xD3
|
||||
|
@ -61,7 +60,7 @@ bool l3g4200dDetect(gyro_t *gyro, uint16_t lpf)
|
|||
// default LPF is set to 32Hz
|
||||
switch (lpf) {
|
||||
default:
|
||||
case 32:
|
||||
case 32:
|
||||
mpuLowPassFilter = L3G4200D_DLPF_32HZ;
|
||||
break;
|
||||
case 54:
|
||||
|
|
|
@ -1,17 +1,17 @@
|
|||
/*
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
@ -39,8 +39,6 @@ extern int16_t debug[4];
|
|||
#define OUT_TEMP_ADDR 0x26
|
||||
#define OUT_X_L_ADDR 0x28
|
||||
|
||||
|
||||
|
||||
#define MODE_ACTIVE ((uint8_t)0x08)
|
||||
|
||||
#define OUTPUT_DATARATE_1 ((uint8_t)0x00)
|
||||
|
@ -65,8 +63,6 @@ extern int16_t debug[4];
|
|||
|
||||
#define BOOT ((uint8_t)0x80)
|
||||
|
||||
|
||||
|
||||
static volatile uint16_t spi1ErrorCount = 0;
|
||||
static volatile uint16_t spi2ErrorCount = 0;
|
||||
static volatile uint16_t spi3ErrorCount = 0;
|
||||
|
@ -84,50 +80,46 @@ static volatile uint16_t spi3ErrorCount = 0;
|
|||
|
||||
uint32_t spiTimeoutUserCallback(SPI_TypeDef *SPIx)
|
||||
{
|
||||
if (SPIx == SPI1)
|
||||
{
|
||||
if (SPIx == SPI1) {
|
||||
spi1ErrorCount++;
|
||||
return spi1ErrorCount;
|
||||
}
|
||||
else if (SPIx == SPI2)
|
||||
{
|
||||
} else if (SPIx == SPI2) {
|
||||
spi2ErrorCount++;
|
||||
return spi2ErrorCount;
|
||||
}
|
||||
else
|
||||
{ spi3ErrorCount++;
|
||||
return spi3ErrorCount;
|
||||
} else {
|
||||
spi3ErrorCount++;
|
||||
return spi3ErrorCount;
|
||||
}
|
||||
}
|
||||
|
||||
static void l3gd20SpiInit(SPI_TypeDef *SPIx)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
SPI_InitTypeDef SPI_InitStructure;
|
||||
SPI_InitTypeDef SPI_InitStructure;
|
||||
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(SPI1_SCK_CLK | SPI1_MISO_CLK | SPI1_MOSI_CLK, ENABLE);
|
||||
|
||||
GPIO_PinAFConfig(SPI1_GPIO, SPI1_SCK_PIN_SOURCE, GPIO_AF_5);
|
||||
GPIO_PinAFConfig(SPI1_GPIO, SPI1_SCK_PIN_SOURCE, GPIO_AF_5);
|
||||
GPIO_PinAFConfig(SPI1_GPIO, SPI1_MISO_PIN_SOURCE, GPIO_AF_5);
|
||||
GPIO_PinAFConfig(SPI1_GPIO, SPI1_MOSI_PIN_SOURCE, GPIO_AF_5);
|
||||
|
||||
// Init pins
|
||||
GPIO_InitStructure.GPIO_Pin = SPI1_SCK_PIN | SPI1_MISO_PIN | SPI1_MOSI_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Pin = SPI1_SCK_PIN | SPI1_MISO_PIN | SPI1_MOSI_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_Init(SPI1_GPIO, &GPIO_InitStructure);
|
||||
|
||||
RCC_AHBPeriphClockCmd(L3GD20_CS_GPIO_CLK, ENABLE);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = L3GD20_CS_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_Pin = L3GD20_CS_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_Init(L3GD20_CS_GPIO, &GPIO_InitStructure);
|
||||
|
||||
|
@ -135,15 +127,15 @@ static void l3gd20SpiInit(SPI_TypeDef *SPIx)
|
|||
|
||||
SPI_I2S_DeInit(SPI1);
|
||||
|
||||
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
|
||||
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
|
||||
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
|
||||
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
|
||||
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
|
||||
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
|
||||
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
|
||||
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
|
||||
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
|
||||
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
|
||||
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
|
||||
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
|
||||
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4; // 36/4 = 9 MHz SPI Clock
|
||||
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
|
||||
SPI_InitStructure.SPI_CRCPolynomial = 7;
|
||||
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
|
||||
SPI_InitStructure.SPI_CRCPolynomial = 7;
|
||||
|
||||
SPI_Init(SPI1, &SPI_InitStructure);
|
||||
|
||||
|
@ -152,22 +144,27 @@ static void l3gd20SpiInit(SPI_TypeDef *SPIx)
|
|||
SPI_Cmd(SPI1, ENABLE);
|
||||
}
|
||||
|
||||
|
||||
static uint8_t spiTransfer(SPI_TypeDef *SPIx, uint8_t data)
|
||||
{
|
||||
uint16_t spiTimeout;
|
||||
|
||||
spiTimeout = 0x1000;
|
||||
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_TXE) == RESET)
|
||||
if ((spiTimeout--) == 0) return spiTimeoutUserCallback(SPIx);
|
||||
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_TXE) == RESET) {
|
||||
if ((spiTimeout--) == 0) {
|
||||
return spiTimeoutUserCallback(SPIx);
|
||||
}
|
||||
}
|
||||
|
||||
SPI_SendData8(SPIx, data);
|
||||
|
||||
spiTimeout = 0x1000;
|
||||
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_RXNE) == RESET)
|
||||
if ((spiTimeout--) == 0) return spiTimeoutUserCallback(SPIx);
|
||||
while (SPI_I2S_GetFlagStatus(SPIx, SPI_I2S_FLAG_RXNE) == RESET) {
|
||||
if ((spiTimeout--) == 0) {
|
||||
return spiTimeoutUserCallback(SPIx);
|
||||
}
|
||||
}
|
||||
|
||||
return((uint8_t)SPI_ReceiveData8(SPIx));
|
||||
return ((uint8_t) SPI_ReceiveData8(SPIx));
|
||||
}
|
||||
|
||||
void l3gd20GyroInit(void)
|
||||
|
@ -175,16 +172,16 @@ void l3gd20GyroInit(void)
|
|||
|
||||
l3gd20SpiInit(L3GD20_SPI);
|
||||
|
||||
GPIO_ResetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
GPIO_ResetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
|
||||
spiTransfer(L3GD20_SPI, CTRL_REG5_ADDR);
|
||||
spiTransfer(L3GD20_SPI, BOOT);
|
||||
spiTransfer(L3GD20_SPI, CTRL_REG5_ADDR);
|
||||
spiTransfer(L3GD20_SPI, BOOT);
|
||||
|
||||
GPIO_SetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
GPIO_SetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
|
||||
delayMicroseconds(100);
|
||||
delayMicroseconds(100);
|
||||
|
||||
GPIO_ResetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
GPIO_ResetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
|
||||
spiTransfer(L3GD20_SPI, CTRL_REG1_ADDR);
|
||||
|
||||
|
@ -210,7 +207,7 @@ static void l3gd20GyroRead(int16_t *gyroData)
|
|||
uint8_t buf[6];
|
||||
|
||||
GPIO_ResetBits(L3GD20_CS_GPIO, L3GD20_CS_PIN);
|
||||
spiTransfer(L3GD20_SPI, OUT_X_L_ADDR | READ_CMD |MULTIPLEBYTE_CMD);
|
||||
spiTransfer(L3GD20_SPI, OUT_X_L_ADDR | READ_CMD | MULTIPLEBYTE_CMD);
|
||||
|
||||
uint8_t index;
|
||||
for (index = 0; index < sizeof(buf); index++) {
|
||||
|
|
|
@ -1,17 +1,17 @@
|
|||
/*
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
|
|
@ -58,7 +58,6 @@ extern int16_t debug[4];
|
|||
|
||||
#define CONTINUOUS_CONVERSION 0x00
|
||||
|
||||
|
||||
uint8_t accelCalibrating = false;
|
||||
|
||||
float accelOneG = 9.8065;
|
||||
|
@ -124,5 +123,3 @@ bool lsm303dlhcAccDetect(acc_t *acc)
|
|||
return true;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
|
|
@ -19,25 +19,12 @@
|
|||
#define DMP_MEM_START_ADDR 0x6E
|
||||
#define DMP_MEM_R_W 0x6F
|
||||
|
||||
#define MPU_RA_XG_OFFS_TC 0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD
|
||||
#define MPU_RA_YG_OFFS_TC 0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD
|
||||
#define MPU_RA_ZG_OFFS_TC 0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD
|
||||
#define MPU_RA_X_FINE_GAIN 0x03 //[7:0] X_FINE_GAIN
|
||||
#define MPU_RA_Y_FINE_GAIN 0x04 //[7:0] Y_FINE_GAIN
|
||||
#define MPU_RA_Z_FINE_GAIN 0x05 //[7:0] Z_FINE_GAIN
|
||||
#define MPU_RA_XA_OFFS_H 0x06 //[15:0] XA_OFFS
|
||||
#define MPU_RA_XA_OFFS_L_TC 0x07
|
||||
#define MPU_RA_YA_OFFS_H 0x08 //[15:0] YA_OFFS
|
||||
#define MPU_RA_YA_OFFS_L_TC 0x09
|
||||
#define MPU_RA_ZA_OFFS_H 0x0A //[15:0] ZA_OFFS
|
||||
#define MPU_RA_ZA_OFFS_L_TC 0x0B
|
||||
#define MPU_RA_PRODUCT_ID 0x0C // Product ID Register
|
||||
#define MPU_RA_XG_OFFS_USRH 0x13 //[15:0] XG_OFFS_USR
|
||||
#define MPU_RA_XG_OFFS_USRL 0x14
|
||||
#define MPU_RA_YG_OFFS_USRH 0x15 //[15:0] YG_OFFS_USR
|
||||
#define MPU_RA_YG_OFFS_USRL 0x16
|
||||
#define MPU_RA_ZG_OFFS_USRH 0x17 //[15:0] ZG_OFFS_USR
|
||||
#define MPU_RA_ZG_OFFS_USRL 0x18
|
||||
#define MPU_RA_XG_OFFS_TC 0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD
#define MPU_RA_YG_OFFS_TC 0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD
#define MPU_RA_ZG_OFFS_TC 0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD
#define MPU_RA_X_FINE_GAIN 0x03 //[7:0] X_FINE_GAIN
#define MPU_RA_Y_FINE_GAIN 0x04 //[7:0] Y_FINE_GAIN
#define MPU_RA_Z_FINE_GAIN 0x05 //[7:0] Z_FINE_GAIN
#define MPU_RA_XA_OFFS_H 0x06 //[15:0] XA_OFFS
#define MPU_RA_XA_OFFS_L_TC 0x07
|
||||
#define MPU_RA_YA_OFFS_H 0x08 //[15:0] YA_OFFS
#define MPU_RA_YA_OFFS_L_TC 0x09
|
||||
#define MPU_RA_ZA_OFFS_H 0x0A //[15:0] ZA_OFFS
#define MPU_RA_ZA_OFFS_L_TC 0x0B
|
||||
#define MPU_RA_PRODUCT_ID 0x0C // Product ID Register
#define MPU_RA_XG_OFFS_USRH 0x13 //[15:0] XG_OFFS_USR
#define MPU_RA_XG_OFFS_USRL 0x14
|
||||
#define MPU_RA_YG_OFFS_USRH 0x15 //[15:0] YG_OFFS_USR
#define MPU_RA_YG_OFFS_USRL 0x16
|
||||
#define MPU_RA_ZG_OFFS_USRH 0x17 //[15:0] ZG_OFFS_USR
#define MPU_RA_ZG_OFFS_USRL 0x18
|
||||
#define MPU_RA_SMPLRT_DIV 0x19
|
||||
#define MPU_RA_CONFIG 0x1A
|
||||
#define MPU_RA_GYRO_CONFIG 0x1B
|
||||
|
@ -109,7 +96,6 @@
|
|||
#define MPU_RA_WHO_AM_I 0x75
|
||||
|
||||
#define MPU6050_SMPLRT_DIV 0 // 8000Hz
|
||||
|
||||
#define MPU6050_LPF_256HZ 0
|
||||
#define MPU6050_LPF_188HZ 1
|
||||
#define MPU6050_LPF_98HZ 2
|
||||
|
@ -137,7 +123,7 @@ static bool mpu6050Detect(void)
|
|||
bool ack;
|
||||
uint8_t sig;
|
||||
|
||||
delay(35); // datasheet page 13 says 30ms. other stuff could have been running meanwhile. but we'll be safe
|
||||
delay(35); // datasheet page 13 says 30ms. other stuff could have been running meanwhile. but we'll be safe
|
||||
|
||||
ack = i2cRead(MPU6050_ADDRESS, MPU_RA_WHO_AM_I, 1, &sig);
|
||||
if (!ack)
|
||||
|
@ -193,7 +179,7 @@ bool mpu6050AccDetect(acc_t *acc)
|
|||
|
||||
acc->init = mpu6050AccInit;
|
||||
acc->read = mpu6050AccRead;
|
||||
acc->revisionCode = (mpuAccelTrim == MPU_6050_HALF_RESOLUTION ? 'o' : 'n'); // es/non-es variance between MPU6050 sensors, half of the naze boards are mpu6000ES.
|
||||
acc->revisionCode = (mpuAccelTrim == MPU_6050_HALF_RESOLUTION ? 'o' : 'n'); // es/non-es variance between MPU6050 sensors, half of the naze boards are mpu6000ES.
|
||||
|
||||
return true;
|
||||
}
|
||||
|
@ -222,7 +208,7 @@ bool mpu6050GyroDetect(gyro_t *gyro, uint16_t lpf)
|
|||
mpuLowPassFilter = MPU6050_LPF_98HZ;
|
||||
break;
|
||||
default:
|
||||
case 42:
|
||||
case 42:
|
||||
mpuLowPassFilter = MPU6050_LPF_42HZ;
|
||||
break;
|
||||
case 20:
|
||||
|
@ -241,7 +227,7 @@ bool mpu6050GyroDetect(gyro_t *gyro, uint16_t lpf)
|
|||
|
||||
static void mpu6050AccInit(void)
|
||||
{
|
||||
switch(mpuAccelTrim) {
|
||||
switch (mpuAccelTrim) {
|
||||
case MPU_6050_HALF_RESOLUTION:
|
||||
acc_1G = 256 * 8;
|
||||
break;
|
||||
|
@ -276,11 +262,12 @@ static void mpu6050GyroInit(void)
|
|||
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_PWR_MGMT_1, 0x80); //PWR_MGMT_1 -- DEVICE_RESET 1
|
||||
delay(5);
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_SMPLRT_DIV, 0x00); //SMPLRT_DIV -- SMPLRT_DIV = 0 Sample Rate = Gyroscope Output Rate / (1 + SMPLRT_DIV)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_PWR_MGMT_1, 0x03); //PWR_MGMT_1 -- SLEEP 0; CYCLE 0; TEMP_DIS 0; CLKSEL 3 (PLL with Z Gyro reference)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_INT_PIN_CFG, 0 << 7 | 0 << 6 | 0 << 5 | 0 << 4 | 0 << 3 | 0 << 2 | 1 << 1 | 0 << 0); // INT_PIN_CFG -- INT_LEVEL_HIGH, INT_OPEN_DIS, LATCH_INT_DIS, INT_RD_CLEAR_DIS, FSYNC_INT_LEVEL_HIGH, FSYNC_INT_DIS, I2C_BYPASS_EN, CLOCK_DIS
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_CONFIG, mpuLowPassFilter); //CONFIG -- EXT_SYNC_SET 0 (disable input pin for data sync) ; default DLPF_CFG = 0 => ACC bandwidth = 260Hz GYRO bandwidth = 256Hz)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_GYRO_CONFIG, 0x18); //GYRO_CONFIG -- FS_SEL = 3: Full scale set to 2000 deg/sec
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_SMPLRT_DIV, 0x00); //SMPLRT_DIV -- SMPLRT_DIV = 0 Sample Rate = Gyroscope Output Rate / (1 + SMPLRT_DIV)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_PWR_MGMT_1, 0x03); //PWR_MGMT_1 -- SLEEP 0; CYCLE 0; TEMP_DIS 0; CLKSEL 3 (PLL with Z Gyro reference)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_INT_PIN_CFG,
|
||||
0 << 7 | 0 << 6 | 0 << 5 | 0 << 4 | 0 << 3 | 0 << 2 | 1 << 1 | 0 << 0); // INT_PIN_CFG -- INT_LEVEL_HIGH, INT_OPEN_DIS, LATCH_INT_DIS, INT_RD_CLEAR_DIS, FSYNC_INT_LEVEL_HIGH, FSYNC_INT_DIS, I2C_BYPASS_EN, CLOCK_DIS
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_CONFIG, mpuLowPassFilter); //CONFIG -- EXT_SYNC_SET 0 (disable input pin for data sync) ; default DLPF_CFG = 0 => ACC bandwidth = 260Hz GYRO bandwidth = 256Hz)
|
||||
i2cWrite(MPU6050_ADDRESS, MPU_RA_GYRO_CONFIG, 0x18); //GYRO_CONFIG -- FS_SEL = 3: Full scale set to 2000 deg/sec
|
||||
|
||||
// ACC Init stuff. Moved into gyro init because the reset above would screw up accel config. Oops.
|
||||
// Accel scale 8g (4096 LSB/g)
|
||||
|
|
|
@ -17,7 +17,7 @@ extern int16_t debug[4];
|
|||
uint16_t adcGetChannel(uint8_t channel)
|
||||
{
|
||||
#if 0
|
||||
switch(adcChannelCount) {
|
||||
switch (adcChannelCount) {
|
||||
case 3:
|
||||
debug[2] = adcValues[adcConfig[2].dmaIndex];
|
||||
/* no break */
|
||||
|
|
|
@ -15,7 +15,7 @@ typedef struct adc_config_t {
|
|||
} adc_config_t;
|
||||
|
||||
typedef struct drv_adc_config_t {
|
||||
uint8_t powerAdcChannel; // which channel used for current monitor, allowed PA1, PB1 (ADC_Channel_1, ADC_Channel_9)
|
||||
uint8_t powerAdcChannel; // which channel used for current monitor, allowed PA1, PB1 (ADC_Channel_1, ADC_Channel_9)
|
||||
} drv_adc_config_t;
|
||||
|
||||
void adcInit(drv_adc_config_t *init);
|
||||
|
|
|
@ -5,16 +5,14 @@
|
|||
|
||||
#include "platform.h"
|
||||
|
||||
#include "sensors_common.h" // FIXME dependency into the main code
|
||||
#include "accgyro_common.h"
|
||||
|
||||
#include "sensors_common.h" // FIXME dependency into the main code
#include "accgyro_common.h"
|
||||
#include "system_common.h"
|
||||
|
||||
#include "adc_fy90q.h"
|
||||
|
||||
//#include "boardalignment.h"
|
||||
|
||||
volatile uint16_t adcData[ADC_CHANNELS] = { 0, };
|
||||
volatile uint16_t adcData[ADC_CHANNELS] = {0,};
|
||||
|
||||
void adcCalibrateADC(ADC_TypeDef *ADCx, int n)
|
||||
{
|
||||
|
|
|
@ -56,9 +56,7 @@ typedef struct {
|
|||
#define E_SENSOR_NOT_DETECTED (char) 0
|
||||
#define BMP085_PROM_START__ADDR 0xaa
|
||||
#define BMP085_PROM_DATA__LEN 22
|
||||
#define BMP085_T_MEASURE 0x2E // temperature measurent
|
||||
#define BMP085_P_MEASURE 0x34 // pressure measurement
|
||||
#define BMP085_CTRL_MEAS_REG 0xF4
|
||||
#define BMP085_T_MEASURE 0x2E // temperature measurent
#define BMP085_P_MEASURE 0x34 // pressure measurement
#define BMP085_CTRL_MEAS_REG 0xF4
|
||||
#define BMP085_ADC_OUT_MSB_REG 0xF6
|
||||
#define BMP085_ADC_OUT_LSB_REG 0xF7
|
||||
#define BMP085_CHIP_ID__POS 0
|
||||
|
@ -79,10 +77,7 @@ typedef struct {
|
|||
#define BMP085_GET_BITSLICE(regvar, bitname) (regvar & bitname##__MSK) >> bitname##__POS
|
||||
#define BMP085_SET_BITSLICE(regvar, bitname, val) (regvar & ~bitname##__MSK) | ((val<<bitname##__POS)&bitname##__MSK)
|
||||
|
||||
#define SMD500_PARAM_MG 3038 //calibration parameter
|
||||
#define SMD500_PARAM_MH -7357 //calibration parameter
|
||||
#define SMD500_PARAM_MI 3791 //calibration parameter
|
||||
|
||||
#define SMD500_PARAM_MG 3038 //calibration parameter
#define SMD500_PARAM_MH -7357 //calibration parameter
#define SMD500_PARAM_MI 3791 //calibration parameter
|
||||
static bmp085_t bmp085 = { { 0, } };
|
||||
static bool bmp085InitDone = false;
|
||||
static uint16_t bmp085_ut; // static result of temperature measurement
|
||||
|
@ -140,14 +135,14 @@ bool bmp085Detect(baro_t *baro)
|
|||
|
||||
delay(20); // datasheet says 10ms, we'll be careful and do 20. this is after ms5611 driver kills us, so longer the better.
|
||||
|
||||
i2cRead(BMP085_I2C_ADDR, BMP085_CHIP_ID__REG, 1, &data); /* read Chip Id */
|
||||
i2cRead(BMP085_I2C_ADDR, BMP085_CHIP_ID__REG, 1, &data); /* read Chip Id */
|
||||
bmp085.chip_id = BMP085_GET_BITSLICE(data, BMP085_CHIP_ID);
|
||||
bmp085.oversampling_setting = 3;
|
||||
|
||||
if (bmp085.chip_id == BMP085_CHIP_ID) { /* get bitslice */
|
||||
if (bmp085.chip_id == BMP085_CHIP_ID) { /* get bitslice */
|
||||
i2cRead(BMP085_I2C_ADDR, BMP085_VERSION_REG, 1, &data); /* read Version reg */
|
||||
bmp085.ml_version = BMP085_GET_BITSLICE(data, BMP085_ML_VERSION); /* get ML Version */
|
||||
bmp085.al_version = BMP085_GET_BITSLICE(data, BMP085_AL_VERSION); /* get AL Version */
|
||||
bmp085.ml_version = BMP085_GET_BITSLICE(data, BMP085_ML_VERSION); /* get ML Version */
|
||||
bmp085.al_version = BMP085_GET_BITSLICE(data, BMP085_AL_VERSION); /* get AL Version */
|
||||
bmp085_get_cal_param(); /* readout bmp085 calibparam structure */
|
||||
bmp085InitDone = true;
|
||||
baro->ut_delay = 6000;
|
||||
|
@ -170,8 +165,8 @@ static int32_t bmp085_get_temperature(uint32_t ut)
|
|||
int32_t temperature;
|
||||
int32_t x1, x2;
|
||||
|
||||
x1 = (((int32_t)ut - (int32_t)bmp085.cal_param.ac6) * (int32_t)bmp085.cal_param.ac5) >> 15;
|
||||
x2 = ((int32_t)bmp085.cal_param.mc << 11) / (x1 + bmp085.cal_param.md);
|
||||
x1 = (((int32_t) ut - (int32_t) bmp085.cal_param.ac6) * (int32_t) bmp085.cal_param.ac5) >> 15;
|
||||
x2 = ((int32_t) bmp085.cal_param.mc << 11) / (x1 + bmp085.cal_param.md);
|
||||
bmp085.param_b5 = x1 + x2;
|
||||
temperature = ((bmp085.param_b5 * 10 + 8) >> 4); // temperature in 0.01°C (make same as MS5611)
|
||||
|
||||
|
@ -194,7 +189,7 @@ static int32_t bmp085_get_pressure(uint32_t up)
|
|||
|
||||
x3 = x1 + x2;
|
||||
|
||||
b3 = (((((int32_t)bmp085.cal_param.ac1) * 4 + x3) << bmp085.oversampling_setting) + 2) >> 2;
|
||||
b3 = (((((int32_t) bmp085.cal_param.ac1) * 4 + x3) << bmp085.oversampling_setting) + 2) >> 2;
|
||||
|
||||
// *****calculate B4************
|
||||
x1 = (bmp085.cal_param.ac3 * b6) >> 13;
|
||||
|
@ -246,9 +241,9 @@ static void bmp085_start_up(void)
|
|||
}
|
||||
|
||||
/** read out up for pressure conversion
|
||||
depending on the oversampling ratio setting up can be 16 to 19 bit
|
||||
\return up parameter that represents the uncompensated pressure value
|
||||
*/
|
||||
depending on the oversampling ratio setting up can be 16 to 19 bit
|
||||
\return up parameter that represents the uncompensated pressure value
|
||||
*/
|
||||
static void bmp085_get_up(void)
|
||||
{
|
||||
uint8_t data[3];
|
||||
|
@ -258,7 +253,8 @@ static void bmp085_get_up(void)
|
|||
convOverrun++;
|
||||
|
||||
i2cRead(BMP085_I2C_ADDR, BMP085_ADC_OUT_MSB_REG, 3, data);
|
||||
bmp085_up = (((uint32_t)data[0] << 16) | ((uint32_t)data[1] << 8) | (uint32_t)data[2]) >> (8 - bmp085.oversampling_setting);
|
||||
bmp085_up = (((uint32_t) data[0] << 16) | ((uint32_t) data[1] << 8) | (uint32_t) data[2])
|
||||
>> (8 - bmp085.oversampling_setting);
|
||||
}
|
||||
|
||||
static void bmp085_calculate(int32_t *pressure, int32_t *temperature)
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
#pragma once
|
||||
|
||||
typedef void (*baroOpFuncPtr)(void); // baro start operation
|
||||
typedef void (*baroCalculateFuncPtr)(int32_t *pressure, int32_t *temperature); // baro calculation (filled params are pressure and temperature)
|
||||
typedef void (*baroCalculateFuncPtr)(int32_t *pressure, int32_t *temperature); // baro calculation (filled params are pressure and temperature)
|
||||
|
||||
typedef struct baro_t {
|
||||
uint16_t ut_delay;
|
||||
|
|
|
@ -11,7 +11,6 @@
|
|||
// SCL PB10
|
||||
// SDA PB11
|
||||
|
||||
|
||||
#ifdef SOFT_I2C
|
||||
|
||||
#define SCL_H GPIOB->BSRR = Pin_10 /* GPIO_SetBits(GPIOB , GPIO_Pin_10) */
|
||||
|
@ -26,8 +25,9 @@
|
|||
static void I2C_delay(void)
|
||||
{
|
||||
volatile int i = 7;
|
||||
while (i)
|
||||
i--;
|
||||
while (i) {
|
||||
i--;
|
||||
}
|
||||
}
|
||||
|
||||
static bool I2C_Start(void)
|
||||
|
@ -35,12 +35,14 @@ static bool I2C_Start(void)
|
|||
SDA_H;
|
||||
SCL_H;
|
||||
I2C_delay();
|
||||
if (!SDA_read)
|
||||
return false;
|
||||
if (!SDA_read) {
|
||||
return false;
|
||||
}
|
||||
SDA_L;
|
||||
I2C_delay();
|
||||
if (SDA_read)
|
||||
return false;
|
||||
if (SDA_read) {
|
||||
return false;
|
||||
}
|
||||
SDA_L;
|
||||
I2C_delay();
|
||||
return true;
|
||||
|
@ -104,10 +106,11 @@ static void I2C_SendByte(uint8_t byte)
|
|||
while (i--) {
|
||||
SCL_L;
|
||||
I2C_delay();
|
||||
if (byte & 0x80)
|
||||
SDA_H;
|
||||
else
|
||||
SDA_L;
|
||||
if (byte & 0x80) {
|
||||
SDA_H;
|
||||
} else {
|
||||
SDA_L;
|
||||
}
|
||||
byte <<= 1;
|
||||
I2C_delay();
|
||||
SCL_H;
|
||||
|
@ -149,8 +152,9 @@ void i2cInit(I2C_TypeDef * I2C)
|
|||
bool i2cWriteBuffer(uint8_t addr, uint8_t reg, uint8_t len, uint8_t * data)
|
||||
{
|
||||
int i;
|
||||
if (!I2C_Start())
|
||||
return false;
|
||||
if (!I2C_Start()) {
|
||||
return false;
|
||||
}
|
||||
I2C_SendByte(addr << 1 | I2C_Direction_Transmitter);
|
||||
if (!I2C_WaitAck()) {
|
||||
I2C_Stop();
|
||||
|
@ -171,8 +175,9 @@ bool i2cWriteBuffer(uint8_t addr, uint8_t reg, uint8_t len, uint8_t * data)
|
|||
|
||||
bool i2cWrite(uint8_t addr, uint8_t reg, uint8_t data)
|
||||
{
|
||||
if (!I2C_Start())
|
||||
return false;
|
||||
if (!I2C_Start()) {
|
||||
return false;
|
||||
}
|
||||
I2C_SendByte(addr << 1 | I2C_Direction_Transmitter);
|
||||
if (!I2C_WaitAck()) {
|
||||
I2C_Stop();
|
||||
|
@ -188,8 +193,9 @@ bool i2cWrite(uint8_t addr, uint8_t reg, uint8_t data)
|
|||
|
||||
bool i2cRead(uint8_t addr, uint8_t reg, uint8_t len, uint8_t *buf)
|
||||
{
|
||||
if (!I2C_Start())
|
||||
return false;
|
||||
if (!I2C_Start()) {
|
||||
return false;
|
||||
}
|
||||
I2C_SendByte(addr << 1 | I2C_Direction_Transmitter);
|
||||
if (!I2C_WaitAck()) {
|
||||
I2C_Stop();
|
||||
|
@ -202,10 +208,11 @@ bool i2cRead(uint8_t addr, uint8_t reg, uint8_t len, uint8_t *buf)
|
|||
I2C_WaitAck();
|
||||
while (len) {
|
||||
*buf = I2C_ReceiveByte();
|
||||
if (len == 1)
|
||||
I2C_NoAck();
|
||||
else
|
||||
I2C_Ack();
|
||||
if (len == 1) {
|
||||
I2C_NoAck();
|
||||
} else {
|
||||
I2C_Ack();
|
||||
}
|
||||
buf++;
|
||||
len--;
|
||||
}
|
||||
|
|
|
@ -60,28 +60,29 @@ static void i2c_er_handler(void)
|
|||
volatile uint32_t SR1Register;
|
||||
// Read the I2C1 status register
|
||||
SR1Register = I2Cx->SR1;
|
||||
if (SR1Register & 0x0F00) { //an error
|
||||
if (SR1Register & 0x0F00) {
|
||||
error = true;
|
||||
// I2C1error.error = ((SR1Register & 0x0F00) >> 8); //save error
|
||||
// I2C1error.job = job; //the task
|
||||
// I2C1error.error = ((SR1Register & 0x0F00) >> 8); // save error
|
||||
// I2C1error.job = job; // the task
|
||||
}
|
||||
|
||||
// If AF, BERR or ARLO, abandon the current job and commence new if there are jobs
|
||||
if (SR1Register & 0x0700) {
|
||||
(void)I2Cx->SR2; // read second status register to clear ADDR if it is set (note that BTF will not be set after a NACK)
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); // disable the RXNE/TXE interrupt - prevent the ISR tailchaining onto the ER (hopefully)
|
||||
if (!(SR1Register & 0x0200) && !(I2Cx->CR1 & 0x0200)) { // if we dont have an ARLO error, ensure sending of a stop
|
||||
if (I2Cx->CR1 & 0x0100) { // We are currently trying to send a start, this is very bad as start,stop will hang the peripheral
|
||||
while (I2Cx->CR1 & 0x0100); // wait for any start to finish sending
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // send stop to finalise bus transaction
|
||||
while (I2Cx->CR1 & 0x0200); // wait for stop to finish sending
|
||||
i2cInit(I2Cx); // reset and configure the hardware
|
||||
(void) I2Cx->SR2; // read second status register to clear ADDR if it is set (note that BTF will not be set after a NACK)
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); // disable the RXNE/TXE interrupt - prevent the ISR tailchaining onto the ER (hopefully)
|
||||
if (!(SR1Register & 0x0200) && !(I2Cx->CR1 & 0x0200)) { // if we dont have an ARLO error, ensure sending of a stop
|
||||
if (I2Cx->CR1 & 0x0100) { // We are currently trying to send a start, this is very bad as start,stop will hang the peripheral
|
||||
while (I2Cx->CR1 & 0x0100); // wait for any start to finish sending
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // send stop to finalise bus transaction
|
||||
while (I2Cx->CR1 & 0x0200); // wait for stop to finish sending
|
||||
i2cInit(I2Cx); // reset and configure the hardware
|
||||
} else {
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // stop to free up the bus
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); // Disable EVT and ERR interrupts while bus inactive
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // stop to free up the bus
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); // Disable EVT and ERR interrupts while bus inactive
|
||||
}
|
||||
}
|
||||
}
|
||||
I2Cx->SR1 &= ~0x0F00; // reset all the error bits to clear the interrupt
|
||||
I2Cx->SR1 &= ~0x0F00; // reset all the error bits to clear the interrupt
|
||||
busy = 0;
|
||||
}
|
||||
|
||||
|
@ -99,12 +100,12 @@ bool i2cWriteBuffer(uint8_t addr_, uint8_t reg_, uint8_t len_, uint8_t *data)
|
|||
busy = 1;
|
||||
error = false;
|
||||
|
||||
if (!(I2Cx->CR2 & I2C_IT_EVT)) { //if we are restarting the driver
|
||||
if (!(I2Cx->CR1 & 0x0100)) { // ensure sending a start
|
||||
while (I2Cx->CR1 & 0x0200) { ; } //wait for any stop to finish sending
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); //send the start for the new job
|
||||
if (!(I2Cx->CR2 & I2C_IT_EVT)) { // if we are restarting the driver
|
||||
if (!(I2Cx->CR1 & 0x0100)) { // ensure sending a start
|
||||
while (I2Cx->CR1 & 0x0200); // wait for any stop to finish sending
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); // send the start for the new job
|
||||
}
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, ENABLE); //allow the interrupts to fire off again
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, ENABLE); // allow the interrupts to fire off again
|
||||
}
|
||||
|
||||
while (busy && --timeout > 0);
|
||||
|
@ -137,12 +138,12 @@ bool i2cRead(uint8_t addr_, uint8_t reg_, uint8_t len, uint8_t* buf)
|
|||
busy = 1;
|
||||
error = false;
|
||||
|
||||
if (!(I2Cx->CR2 & I2C_IT_EVT)) { //if we are restarting the driver
|
||||
if (!(I2Cx->CR1 & 0x0100)) { // ensure sending a start
|
||||
while (I2Cx->CR1 & 0x0200) { ; } //wait for any stop to finish sending
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); //send the start for the new job
|
||||
if (!(I2Cx->CR2 & I2C_IT_EVT)) { // if we are restarting the driver
|
||||
if (!(I2Cx->CR1 & 0x0100)) { // ensure sending a start
|
||||
while (I2Cx->CR1 & 0x0200); // wait for any stop to finish sending
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); // send the start for the new job
|
||||
}
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, ENABLE); //allow the interrupts to fire off again
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, ENABLE); // allow the interrupts to fire off again
|
||||
}
|
||||
|
||||
while (busy && --timeout > 0);
|
||||
|
@ -158,82 +159,83 @@ bool i2cRead(uint8_t addr_, uint8_t reg_, uint8_t len, uint8_t* buf)
|
|||
|
||||
void i2c_ev_handler(void)
|
||||
{
|
||||
static uint8_t subaddress_sent, final_stop; //flag to indicate if subaddess sent, flag to indicate final bus condition
|
||||
static int8_t index; //index is signed -1==send the subaddress
|
||||
uint8_t SReg_1 = I2Cx->SR1; //read the status register here
|
||||
static uint8_t subaddress_sent, final_stop; // flag to indicate if subaddess sent, flag to indicate final bus condition
|
||||
static int8_t index; // index is signed -1==send the subaddress
|
||||
uint8_t SReg_1 = I2Cx->SR1; // read the status register here
|
||||
|
||||
if (SReg_1 & 0x0001) { //we just sent a start - EV5 in ref manual
|
||||
I2Cx->CR1 &= ~0x0800; //reset the POS bit so ACK/NACK applied to the current byte
|
||||
I2C_AcknowledgeConfig(I2Cx, ENABLE); //make sure ACK is on
|
||||
index = 0; //reset the index
|
||||
if (reading && (subaddress_sent || 0xFF == reg)) { //we have sent the subaddr
|
||||
subaddress_sent = 1; //make sure this is set in case of no subaddress, so following code runs correctly
|
||||
if (SReg_1 & 0x0001) { // we just sent a start - EV5 in ref manual
|
||||
I2Cx->CR1 &= ~0x0800; // reset the POS bit so ACK/NACK applied to the current byte
|
||||
I2C_AcknowledgeConfig(I2Cx, ENABLE); // make sure ACK is on
|
||||
index = 0; // reset the index
|
||||
if (reading && (subaddress_sent || 0xFF == reg)) { // we have sent the subaddr
|
||||
subaddress_sent = 1; // make sure this is set in case of no subaddress, so following code runs correctly
|
||||
if (bytes == 2)
|
||||
I2Cx->CR1 |= 0x0800; //set the POS bit so NACK applied to the final byte in the two byte read
|
||||
I2C_Send7bitAddress(I2Cx, addr, I2C_Direction_Receiver); //send the address and set hardware mode
|
||||
} else { //direction is Tx, or we havent sent the sub and rep start
|
||||
I2C_Send7bitAddress(I2Cx, addr, I2C_Direction_Transmitter); //send the address and set hardware mode
|
||||
if (reg != 0xFF) //0xFF as subaddress means it will be ignored, in Tx or Rx mode
|
||||
index = -1; //send a subaddress
|
||||
I2Cx->CR1 |= 0x0800; // set the POS bit so NACK applied to the final byte in the two byte read
|
||||
I2C_Send7bitAddress(I2Cx, addr, I2C_Direction_Receiver); // send the address and set hardware mode
|
||||
} else { // direction is Tx, or we havent sent the sub and rep start
|
||||
I2C_Send7bitAddress(I2Cx, addr, I2C_Direction_Transmitter); // send the address and set hardware mode
|
||||
if (reg != 0xFF) // 0xFF as subaddress means it will be ignored, in Tx or Rx mode
|
||||
index = -1; // send a subaddress
|
||||
}
|
||||
} else if (SReg_1 & 0x0002) { //we just sent the address - EV6 in ref manual
|
||||
} else if (SReg_1 & 0x0002) { // we just sent the address - EV6 in ref manual
|
||||
// Read SR1,2 to clear ADDR
|
||||
__DMB(); // memory fence to control hardware
|
||||
if (bytes == 1 && reading && subaddress_sent) { // we are receiving 1 byte - EV6_3
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); // turn off ACK
|
||||
if (bytes == 1 && reading && subaddress_sent) { // we are receiving 1 byte - EV6_3
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); // turn off ACK
|
||||
__DMB();
|
||||
(void)I2Cx->SR2; // clear ADDR after ACK is turned off
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // program the stop
|
||||
(void) I2Cx->SR2; // clear ADDR after ACK is turned off
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // program the stop
|
||||
final_stop = 1;
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, ENABLE); // allow us to have an EV7
|
||||
} else { // EV6 and EV6_1
|
||||
(void)I2Cx->SR2; // clear the ADDR here
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, ENABLE); // allow us to have an EV7
|
||||
} else { // EV6 and EV6_1
|
||||
(void) I2Cx->SR2; // clear the ADDR here
|
||||
__DMB();
|
||||
if (bytes == 2 && reading && subaddress_sent) { //rx 2 bytes - EV6_1
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); //turn off ACK
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); //disable TXE to allow the buffer to fill
|
||||
} else if (bytes == 3 && reading && subaddress_sent) //rx 3 bytes
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); //make sure RXNE disabled so we get a BTF in two bytes time
|
||||
else //receiving greater than three bytes, sending subaddress, or transmitting
|
||||
if (bytes == 2 && reading && subaddress_sent) { // rx 2 bytes - EV6_1
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); // turn off ACK
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); // disable TXE to allow the buffer to fill
|
||||
} else if (bytes == 3 && reading && subaddress_sent) // rx 3 bytes
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); // make sure RXNE disabled so we get a BTF in two bytes time
|
||||
else
|
||||
//receiving greater than three bytes, sending subaddress, or transmitting
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, ENABLE);
|
||||
}
|
||||
} else if (SReg_1 & 0x004) { //Byte transfer finished - EV7_2, EV7_3 or EV8_2
|
||||
} else if (SReg_1 & 0x004) { // Byte transfer finished - EV7_2, EV7_3 or EV8_2
|
||||
final_stop = 1;
|
||||
if (reading && subaddress_sent) { //EV7_2, EV7_3
|
||||
if (bytes > 2) { //EV7_2
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); //turn off ACK
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); //read data N-2
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); //program the Stop
|
||||
final_stop = 1; //reuired to fix hardware
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); //read data N-1
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, ENABLE); //enable TXE to allow the final EV7
|
||||
} else { //EV7_3
|
||||
if (reading && subaddress_sent) { // EV7_2, EV7_3
|
||||
if (bytes > 2) { // EV7_2
|
||||
I2C_AcknowledgeConfig(I2Cx, DISABLE); // turn off ACK
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); // read data N-2
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // program the Stop
|
||||
final_stop = 1; // required to fix hardware
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); // read data N-1
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, ENABLE); // enable TXE to allow the final EV7
|
||||
} else { // EV7_3
|
||||
if (final_stop)
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); //program the Stop
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // program the Stop
|
||||
else
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); //program a rep start
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); //read data N-1
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); //read data N
|
||||
index++; //to show job completed
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); // program a rep start
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); // read data N-1
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx); // read data N
|
||||
index++; // to show job completed
|
||||
}
|
||||
} else { //EV8_2, which may be due to a subaddress sent or a write completion
|
||||
} else { // EV8_2, which may be due to a subaddress sent or a write completion
|
||||
if (subaddress_sent || (writing)) {
|
||||
if (final_stop)
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); //program the Stop
|
||||
I2C_GenerateSTOP(I2Cx, ENABLE); // program the Stop
|
||||
else
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); //program a rep start
|
||||
index++; //to show that the job is complete
|
||||
} else { //We need to send a subaddress
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); //program the repeated Start
|
||||
subaddress_sent = 1; //this is set back to zero upon completion of the current task
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); // program a rep start
|
||||
index++; // to show that the job is complete
|
||||
} else { // We need to send a subaddress
|
||||
I2C_GenerateSTART(I2Cx, ENABLE); // program the repeated Start
|
||||
subaddress_sent = 1; // this is set back to zero upon completion of the current task
|
||||
}
|
||||
}
|
||||
//we must wait for the start to clear, otherwise we get constant BTF
|
||||
while (I2Cx->CR1 & 0x0100) { ; }
|
||||
while (I2Cx->CR1 & 0x0100);
|
||||
} else if (SReg_1 & 0x0040) { //Byte received - EV7
|
||||
read_p[index++] = I2C_ReceiveData(I2Cx);
|
||||
if (bytes == (index + 3))
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); //disable TXE to allow the buffer to flush so we can get an EV7_2
|
||||
I2C_ITConfig(I2Cx, I2C_IT_BUF, DISABLE); // disable TXE to allow the buffer to flush so we can get an EV7_2
|
||||
if (bytes == index) //We have completed a final EV7
|
||||
index++; //to show job is complete
|
||||
} else if (SReg_1 & 0x0080) { //Byte transmitted -EV8/EV8_1
|
||||
|
@ -249,12 +251,12 @@ void i2c_ev_handler(void)
|
|||
}
|
||||
}
|
||||
if (index == bytes + 1) { //we have completed the current job
|
||||
//Completion Tasks go here
|
||||
//End of completion tasks
|
||||
//Completion Tasks go here
|
||||
//End of completion tasks
|
||||
subaddress_sent = 0; //reset this here
|
||||
// I2Cx->CR1 &= ~0x0800; //reset the POS bit so NACK applied to the current byte
|
||||
if (final_stop) //If there is a final stop and no more jobs, bus is inactive, disable interrupts to prevent BTF
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); //Disable EVT and ERR interrupts while bus inactive
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); //Disable EVT and ERR interrupts while bus inactive
|
||||
busy = 0;
|
||||
}
|
||||
}
|
||||
|
@ -280,7 +282,7 @@ void i2cInit(I2C_TypeDef *I2C)
|
|||
I2C_DeInit(I2Cx);
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); //Enable EVT and ERR interrupts - they are enabled by the first request
|
||||
I2C_ITConfig(I2Cx, I2C_IT_EVT | I2C_IT_ERR, DISABLE); //Enable EVT and ERR interrupts - they are enabled by the first request
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;
|
||||
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
|
||||
|
@ -301,7 +303,6 @@ void i2cInit(I2C_TypeDef *I2C)
|
|||
NVIC_InitStructure.NVIC_IRQChannel = I2C2_EV_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
}
|
||||
|
||||
uint16_t i2cGetErrorCounter(void)
|
||||
|
|
|
@ -15,7 +15,6 @@
|
|||
#define I2C_SHORT_TIMEOUT ((uint32_t)0x1000)
|
||||
#define I2C_LONG_TIMEOUT ((uint32_t)(10 * I2C_SHORT_TIMEOUT))
|
||||
|
||||
|
||||
#define I2C1_SCL_GPIO GPIOB
|
||||
#define I2C1_SCL_PIN GPIO_Pin_6
|
||||
#define I2C1_SCL_PIN_SOURCE GPIO_PinSource6
|
||||
|
@ -34,7 +33,7 @@
|
|||
#define I2C2_SDA_PIN_SOURCE GPIO_PinSource10
|
||||
#define I2C2_SDA_CLK_SOURCE RCC_AHBPeriph_GPIOA
|
||||
|
||||
static uint32_t i2cTimeout;
|
||||
static uint32_t i2cTimeout;
|
||||
|
||||
static volatile uint16_t i2c1ErrorCount = 0;
|
||||
static volatile uint16_t i2c2ErrorCount = 0;
|
||||
|
@ -45,12 +44,9 @@ static volatile uint16_t i2c2ErrorCount = 0;
|
|||
|
||||
uint32_t i2cTimeoutUserCallback(I2C_TypeDef *I2Cx)
|
||||
{
|
||||
if (I2Cx == I2C1)
|
||||
{
|
||||
if (I2Cx == I2C1) {
|
||||
i2c1ErrorCount++;
|
||||
}
|
||||
else
|
||||
{
|
||||
} else {
|
||||
i2c2ErrorCount++;
|
||||
}
|
||||
return false;
|
||||
|
@ -59,13 +55,10 @@ uint32_t i2cTimeoutUserCallback(I2C_TypeDef *I2Cx)
|
|||
void i2cInitPort(I2C_TypeDef *I2Cx)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
I2C_InitTypeDef I2C_InitStructure;
|
||||
I2C_InitTypeDef I2C_InitStructure;
|
||||
|
||||
///////////////////////////////////
|
||||
|
||||
if (I2Cx == I2C1)
|
||||
{
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
if (I2Cx == I2C1) {
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(I2C1_SCL_CLK_SOURCE | I2C1_SDA_CLK_SOURCE, ENABLE);
|
||||
RCC_I2CCLKConfig(RCC_I2C1CLK_SYSCLK);
|
||||
|
@ -80,24 +73,24 @@ void i2cInitPort(I2C_TypeDef *I2Cx)
|
|||
|
||||
// Init pins
|
||||
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SCL_PIN;
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SCL_PIN;
|
||||
GPIO_Init(I2C1_SCL_GPIO, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SDA_PIN;
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SDA_PIN;
|
||||
GPIO_Init(I2C1_SDA_GPIO, &GPIO_InitStructure);
|
||||
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
|
||||
I2C_InitStructure.I2C_Timing = 0x00E0257A; // 400 Khz, 72Mhz Clock, Analog Filter Delay ON, Rise 100, Fall 10.
|
||||
//I2C_InitStructure.I2C_Timing = 0x8000050B;
|
||||
|
@ -107,13 +100,10 @@ void i2cInitPort(I2C_TypeDef *I2Cx)
|
|||
I2C_Cmd(I2C1, ENABLE);
|
||||
}
|
||||
|
||||
///////////////////////////////////
|
||||
|
||||
if (I2Cx == I2C2)
|
||||
{
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
if (I2Cx == I2C2) {
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(I2C2_SCL_CLK_SOURCE |I2C2_SDA_CLK_SOURCE, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(I2C2_SCL_CLK_SOURCE | I2C2_SDA_CLK_SOURCE, ENABLE);
|
||||
RCC_I2CCLKConfig(RCC_I2C2CLK_SYSCLK);
|
||||
|
||||
//i2cUnstick(I2Cx); // Clock out stuff to make sure slaves arent stuck
|
||||
|
@ -125,24 +115,24 @@ void i2cInitPort(I2C_TypeDef *I2Cx)
|
|||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
// Init pins
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SCL_PIN;
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SCL_PIN;
|
||||
GPIO_Init(I2C2_SCL_GPIO, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SDA_PIN;
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SDA_PIN;
|
||||
GPIO_Init(I2C2_SDA_GPIO, &GPIO_InitStructure);
|
||||
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
|
||||
I2C_InitStructure.I2C_Timing = 0x00E0257A; // 400 Khz, 72Mhz Clock, Analog Filter Delay ON, Rise 100, Fall 10.
|
||||
//I2C_InitStructure.I2C_Timing = 0x8000050B;
|
||||
|
@ -160,7 +150,6 @@ void i2cInit(I2C_TypeDef *I2C)
|
|||
|
||||
uint16_t i2cGetErrorCounter(void)
|
||||
{
|
||||
// FIXME implement
|
||||
return i2c1ErrorCount;
|
||||
}
|
||||
|
||||
|
@ -170,10 +159,10 @@ bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
|||
|
||||
/* Test on BUSY Flag */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
|
@ -181,10 +170,10 @@ bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
|||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Send Register address */
|
||||
|
@ -192,10 +181,11 @@ bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
|||
|
||||
/* Wait until TCR flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TCR) == RESET)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_TCR) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
|
@ -203,10 +193,10 @@ bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
|||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return
|
||||
i2cTimeoutUserCallback(I2Cx);
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Write data to TXDR */
|
||||
|
@ -214,9 +204,10 @@ bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
|||
|
||||
/* Wait until STOPF flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return i2cTimeoutUserCallback(I2Cx);
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Clear STOPF flag */
|
||||
|
@ -230,10 +221,10 @@ bool i2cRead(uint8_t addr_, uint8_t reg, uint8_t len, uint8_t* buf)
|
|||
I2C_TypeDef* I2Cx = I2C1;
|
||||
/* Test on BUSY Flag */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
|
@ -241,38 +232,38 @@ bool i2cRead(uint8_t addr_, uint8_t reg, uint8_t len, uint8_t* buf)
|
|||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
if(len > 1)
|
||||
if (len > 1) {
|
||||
reg |= 0x80;
|
||||
}
|
||||
|
||||
/* Send Register address */
|
||||
I2C_SendData(I2Cx, (uint8_t)reg);
|
||||
I2C_SendData(I2Cx, (uint8_t) reg);
|
||||
|
||||
/* Wait until TC flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TC) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_TC) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
I2C_TransferHandling(I2Cx, addr_, len, I2C_AutoEnd_Mode, I2C_Generate_Start_Read);
|
||||
|
||||
/* Wait until all data are received */
|
||||
while (len)
|
||||
{
|
||||
while (len) {
|
||||
/* Wait until RXNE flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_RXNE) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_RXNE) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Read data from RXDR */
|
||||
|
@ -286,10 +277,10 @@ bool i2cRead(uint8_t addr_, uint8_t reg, uint8_t len, uint8_t* buf)
|
|||
|
||||
/* Wait until STOPF flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return
|
||||
i2cTimeoutUserCallback(I2Cx);
|
||||
while (I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET) {
|
||||
if ((i2cTimeout--) == 0) {
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
}
|
||||
|
||||
/* Clear STOPF flag */
|
||||
|
|
|
@ -1,4 +1,3 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
|
@ -16,8 +15,8 @@
|
|||
void pwmICConfig(TIM_TypeDef *tim, uint8_t channel, uint16_t polarity); // from pwm_output.c
|
||||
|
||||
typedef enum {
|
||||
INPUT_MODE_PPM,
|
||||
INPUT_MODE_PWM,
|
||||
INPUT_MODE_PPM,
|
||||
INPUT_MODE_PWM,
|
||||
} pwmInputMode_t;
|
||||
|
||||
typedef struct {
|
||||
|
@ -36,7 +35,6 @@ static pwmInputPort_t pwmInputPorts[MAX_PWM_INPUT_PORTS];
|
|||
|
||||
static uint16_t captures[MAX_PWM_INPUT_PORTS];
|
||||
|
||||
|
||||
static void ppmCallback(uint8_t port, captureCompare_t capture)
|
||||
{
|
||||
int32_t diff;
|
||||
|
@ -61,8 +59,8 @@ static void ppmCallback(uint8_t port, captureCompare_t capture)
|
|||
|
||||
static void pwmCallback(uint8_t port, captureCompare_t capture)
|
||||
{
|
||||
pwmInputPort_t *pwmInputPort = &pwmInputPorts[port];
|
||||
const timerHardware_t *timerHardware = pwmInputPort->timerHardware;
|
||||
pwmInputPort_t *pwmInputPort = &pwmInputPorts[port];
|
||||
const timerHardware_t *timerHardware = pwmInputPort->timerHardware;
|
||||
|
||||
if (pwmInputPort->state == 0) {
|
||||
pwmInputPort->rise = capture;
|
||||
|
@ -95,7 +93,7 @@ static void pwmGPIOConfig(GPIO_TypeDef *gpio, uint32_t pin, GPIO_Mode mode)
|
|||
|
||||
void pwmICConfig(TIM_TypeDef *tim, uint8_t channel, uint16_t polarity)
|
||||
{
|
||||
TIM_ICInitTypeDef TIM_ICInitStructure;
|
||||
TIM_ICInitTypeDef TIM_ICInitStructure;
|
||||
|
||||
TIM_ICStructInit(&TIM_ICInitStructure);
|
||||
TIM_ICInitStructure.TIM_Channel = channel;
|
||||
|
|
|
@ -1,4 +1,3 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
|
|
|
@ -1,6 +1,5 @@
|
|||
#pragma once
|
||||
|
||||
|
||||
typedef enum {
|
||||
SERIAL_NOT_INVERTED = 0,
|
||||
SERIAL_INVERTED
|
||||
|
|
Loading…
Reference in New Issue