Updating FrSky telemetry docs to match recent code changes.
This commit is contained in:
parent
1b47d3cbae
commit
8fef02fe8d
|
@ -46,6 +46,14 @@ For 2 and 3 use the cli command as follows:
|
|||
set frsky_inversion = 1
|
||||
```
|
||||
|
||||
### Notes
|
||||
|
||||
RPM shows throttle output when armed.
|
||||
RPM shows when diarmed.
|
||||
TEMP2 shows Satallite Signal Quality when GPS is enabled.
|
||||
|
||||
RPM requires that the 'blades' setting is set to 12 on your receiver/display - tested with Taranis/OpenTX.
|
||||
|
||||
## HoTT telemetry
|
||||
|
||||
HoTT telemetry can be used when the TX and RX pins of a serial port are connected using a diode and a single wire to the T port on a HoTT receiver.
|
||||
|
|
Loading…
Reference in New Issue