CF/BF - Extract cli settings so they can be re-used.
CF/BF - Save 1280 bytes of flash and delete over 300 lines of code by removing giant switch statement and static variables in the CLI. fix CF/BF - Remove some conditional code because there is a copy of every PG so it will always be found*. * unless a developer makes an error in the value table by specifying an invalid PG. CF/BF - Remove final usages of getCurrentAndDefaultConfigs to save more flash space. CF/BF - Change CLI command 'dump showdefaults' to simply 'dump defaults'. * This will save a few bytes of flash space due to string re-use of the 'defaults' string. CF/BF - Save a few more bytes by re-using the 'defaults' string again. CF/BF - Fix CLI not being size optimized. * The file had moved but the makefile was not updated to reflect that. CF/BF - Add 'fc_init.c' and 'settings.c' to the size optimizations list. CF/BF - Add some config source files to the size-optimized list. CF/BF - De-duplicate CR/LF code by using appropriate methods. Promote additional string re-use. * This saves quite a lot of space when the file is size optimized, but grows it otherwise. CF/BF - Further flash savings by removing more CR/LF on the cliDump/cliDefaultPrintf format strings. * It turns out that all the format strings ended in CR+LF so they could all be removed. CF/BF - Fix LF+CR being used instead of CR+LF for further flash savings.
This commit is contained in:
Dominic Clifton
Michael Keller
parent
63552348c0
commit
970f193dd7
9
Makefile
9
Makefile
|
|
@ -723,6 +723,7 @@ FC_SRC = \
|
|||
fc/rc_adjustments.c \
|
||||
fc/rc_controls.c \
|
||||
fc/cli.c \
|
||||
fc/settings.c \
|
||||
flight/altitude.c \
|
||||
flight/failsafe.c \
|
||||
flight/imu.c \
|
||||
|
|
@ -885,7 +886,13 @@ SPEED_OPTIMISED_SRC := $(SPEED_OPTIMISED_SRC) \
|
|||
SIZE_OPTIMISED_SRC := $(SIZE_OPTIMISED_SRC) \
|
||||
drivers/serial_escserial.c \
|
||||
drivers/vtx_common.c \
|
||||
io/cli.c \
|
||||
fc/fc_init.c \
|
||||
fc/cli.c \
|
||||
fc/settings.c \
|
||||
config/config_eeprom.c \
|
||||
config/feature.c \
|
||||
config/parameter_group.c \
|
||||
config/config_streamer.c \
|
||||
io/serial_4way.c \
|
||||
io/serial_4way_avrootloader.c \
|
||||
io/serial_4way_stk500v2.c \
|
||||
|
|
|
|||
|
|
@ -49,6 +49,7 @@ typedef struct pgRegistry_s {
|
|||
pgn_t pgn; // The parameter group number, the top 4 bits are reserved for version
|
||||
uint16_t size; // Size of the group in RAM, the top 4 bits are reserved for flags
|
||||
uint8_t *address; // Address of the group in RAM.
|
||||
uint8_t *copy; // Address of the copy in RAM.
|
||||
uint8_t **ptr; // The pointer to update after loading the record into ram.
|
||||
union {
|
||||
void *ptr; // Pointer to init template
|
||||
|
|
@ -107,14 +108,16 @@ extern const uint8_t __pg_resetdata_end[];
|
|||
// Declare system config
|
||||
#define PG_DECLARE(_type, _name) \
|
||||
extern _type _name ## _System; \
|
||||
extern _type _name ## _Copy; \
|
||||
static inline const _type* _name(void) { return &_name ## _System; }\
|
||||
static inline _type* _name ## Mutable(void) { return &_name ## _System; }\
|
||||
struct _dummy \
|
||||
/**/
|
||||
|
||||
// Declare system config array
|
||||
#define PG_DECLARE_ARRAY(_type, _size, _name) \
|
||||
#define PG_DECLARE_ARRAY(_type, _size, _name) \
|
||||
extern _type _name ## _SystemArray[_size]; \
|
||||
extern _type _name ## _CopyArray[_size]; \
|
||||
static inline const _type* _name(int _index) { return &_name ## _SystemArray[_index]; } \
|
||||
static inline _type* _name ## Mutable(int _index) { return &_name ## _SystemArray[_index]; } \
|
||||
static inline _type (* _name ## _array(void))[_size] { return &_name ## _SystemArray; } \
|
||||
|
|
@ -133,12 +136,14 @@ extern const uint8_t __pg_resetdata_end[];
|
|||
// Register system config
|
||||
#define PG_REGISTER_I(_type, _name, _pgn, _version, _reset) \
|
||||
_type _name ## _System; \
|
||||
_type _name ## _Copy; \
|
||||
/* Force external linkage for g++. Catch multi registration */ \
|
||||
extern const pgRegistry_t _name ## _Registry; \
|
||||
const pgRegistry_t _name ##_Registry PG_REGISTER_ATTRIBUTES = { \
|
||||
.pgn = _pgn | (_version << 12), \
|
||||
.size = sizeof(_type) | PGR_SIZE_SYSTEM_FLAG, \
|
||||
.address = (uint8_t*)&_name ## _System, \
|
||||
.copy = (uint8_t*)&_name ## _Copy, \
|
||||
.ptr = 0, \
|
||||
_reset, \
|
||||
} \
|
||||
|
|
@ -161,11 +166,13 @@ extern const uint8_t __pg_resetdata_end[];
|
|||
// Register system config array
|
||||
#define PG_REGISTER_ARRAY_I(_type, _size, _name, _pgn, _version, _reset) \
|
||||
_type _name ## _SystemArray[_size]; \
|
||||
_type _name ## _CopyArray[_size]; \
|
||||
extern const pgRegistry_t _name ##_Registry; \
|
||||
const pgRegistry_t _name ## _Registry PG_REGISTER_ATTRIBUTES = { \
|
||||
.pgn = _pgn | (_version << 12), \
|
||||
.size = (sizeof(_type) * _size) | PGR_SIZE_SYSTEM_FLAG, \
|
||||
.address = (uint8_t*)&_name ## _SystemArray, \
|
||||
.copy = (uint8_t*)&_name ## _CopyArray, \
|
||||
.ptr = 0, \
|
||||
_reset, \
|
||||
} \
|
||||
|
|
|
|||
1551
src/main/fc/cli.c
1551
src/main/fc/cli.c
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,693 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <stdarg.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
#include <ctype.h>
|
||||
|
||||
#include "platform.h"
|
||||
|
||||
#include "build/debug.h"
|
||||
|
||||
#include "common/utils.h"
|
||||
|
||||
#include "config/parameter_group.h"
|
||||
#include "config/parameter_group_ids.h"
|
||||
|
||||
#include "sensors/gyro.h"
|
||||
|
||||
#include "fc/settings.h"
|
||||
|
||||
#include "blackbox/blackbox.h"
|
||||
|
||||
#include "cms/cms.h"
|
||||
|
||||
#include "fc/config.h"
|
||||
#include "fc/controlrate_profile.h"
|
||||
#include "fc/fc_core.h"
|
||||
#include "fc/rc_adjustments.h"
|
||||
|
||||
#include "flight/altitude.h"
|
||||
#include "flight/failsafe.h"
|
||||
#include "flight/imu.h"
|
||||
#include "flight/mixer.h"
|
||||
#include "flight/navigation.h"
|
||||
#include "flight/pid.h"
|
||||
#include "flight/servos.h"
|
||||
|
||||
#include "io/gimbal.h"
|
||||
#include "io/gps.h"
|
||||
#include "io/ledstrip.h"
|
||||
#include "io/osd.h"
|
||||
#include "io/vtx_rtc6705.h"
|
||||
|
||||
#include "rx/rx.h"
|
||||
#include "rx/spektrum.h"
|
||||
|
||||
#include "sensors/acceleration.h"
|
||||
#include "sensors/barometer.h"
|
||||
#include "sensors/battery.h"
|
||||
#include "sensors/boardalignment.h"
|
||||
#include "sensors/compass.h"
|
||||
|
||||
#include "telemetry/frsky.h"
|
||||
#include "telemetry/telemetry.h"
|
||||
|
||||
// Sensor names (used in lookup tables for *_hardware settings and in status command output)
|
||||
// sync with accelerationSensor_e
|
||||
const char * const lookupTableAccHardware[] = {
|
||||
"AUTO", "NONE", "ADXL345", "MPU6050", "MMA8452", "BMA280", "LSM303DLHC",
|
||||
"MPU6000", "MPU6500", "MPU9250", "ICM20601", "ICM20602", "ICM20608", "ICM20689", "BMI160", "FAKE"
|
||||
};
|
||||
#if defined(USE_SENSOR_NAMES) || defined(BARO)
|
||||
// sync with baroSensor_e
|
||||
const char * const lookupTableBaroHardware[] = {
|
||||
"AUTO", "NONE", "BMP085", "MS5611", "BMP280"
|
||||
};
|
||||
#endif
|
||||
#if defined(USE_SENSOR_NAMES) || defined(MAG)
|
||||
// sync with magSensor_e
|
||||
const char * const lookupTableMagHardware[] = {
|
||||
"AUTO", "NONE", "HMC5883", "AK8975", "AK8963"
|
||||
};
|
||||
#endif
|
||||
|
||||
static const char * const lookupTableOffOn[] = {
|
||||
"OFF", "ON"
|
||||
};
|
||||
|
||||
static const char * const lookupTableCrashRecovery[] = {
|
||||
"OFF", "ON" ,"BEEP"
|
||||
};
|
||||
|
||||
static const char * const lookupTableUnit[] = {
|
||||
"IMPERIAL", "METRIC"
|
||||
};
|
||||
|
||||
static const char * const lookupTableAlignment[] = {
|
||||
"DEFAULT",
|
||||
"CW0",
|
||||
"CW90",
|
||||
"CW180",
|
||||
"CW270",
|
||||
"CW0FLIP",
|
||||
"CW90FLIP",
|
||||
"CW180FLIP",
|
||||
"CW270FLIP"
|
||||
};
|
||||
|
||||
#ifdef GPS
|
||||
static const char * const lookupTableGPSProvider[] = {
|
||||
"NMEA", "UBLOX"
|
||||
};
|
||||
|
||||
static const char * const lookupTableGPSSBASMode[] = {
|
||||
"AUTO", "EGNOS", "WAAS", "MSAS", "GAGAN"
|
||||
};
|
||||
#endif
|
||||
|
||||
static const char * const lookupTableCurrentSensor[] = {
|
||||
"NONE", "ADC", "VIRTUAL", "ESC"
|
||||
};
|
||||
|
||||
static const char * const lookupTableBatterySensor[] = {
|
||||
"NONE", "ADC", "ESC"
|
||||
};
|
||||
|
||||
#ifdef USE_SERVOS
|
||||
static const char * const lookupTableGimbalMode[] = {
|
||||
"NORMAL", "MIXTILT"
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BLACKBOX
|
||||
static const char * const lookupTableBlackboxDevice[] = {
|
||||
"NONE", "SPIFLASH", "SDCARD", "SERIAL"
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef SERIAL_RX
|
||||
static const char * const lookupTableSerialRX[] = {
|
||||
"SPEK1024",
|
||||
"SPEK2048",
|
||||
"SBUS",
|
||||
"SUMD",
|
||||
"SUMH",
|
||||
"XB-B",
|
||||
"XB-B-RJ01",
|
||||
"IBUS",
|
||||
"JETIEXBUS",
|
||||
"CRSF",
|
||||
"SRXL"
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef USE_RX_SPI
|
||||
// sync with rx_spi_protocol_e
|
||||
static const char * const lookupTableRxSpi[] = {
|
||||
"V202_250K",
|
||||
"V202_1M",
|
||||
"SYMA_X",
|
||||
"SYMA_X5C",
|
||||
"CX10",
|
||||
"CX10A",
|
||||
"H8_3D",
|
||||
"INAV"
|
||||
};
|
||||
#endif
|
||||
|
||||
static const char * const lookupTableGyroLpf[] = {
|
||||
"OFF",
|
||||
"188HZ",
|
||||
"98HZ",
|
||||
"42HZ",
|
||||
"20HZ",
|
||||
"10HZ",
|
||||
"5HZ",
|
||||
"EXPERIMENTAL"
|
||||
};
|
||||
|
||||
static const char * const lookupTableDebug[DEBUG_COUNT] = {
|
||||
"NONE",
|
||||
"CYCLETIME",
|
||||
"BATTERY",
|
||||
"GYRO",
|
||||
"ACCELEROMETER",
|
||||
"MIXER",
|
||||
"AIRMODE",
|
||||
"PIDLOOP",
|
||||
"NOTCH",
|
||||
"RC_INTERPOLATION",
|
||||
"VELOCITY",
|
||||
"DFILTER",
|
||||
"ANGLERATE",
|
||||
"ESC_SENSOR",
|
||||
"SCHEDULER",
|
||||
"STACK",
|
||||
"ESC_SENSOR_RPM",
|
||||
"ESC_SENSOR_TMP",
|
||||
"ALTITUDE"
|
||||
};
|
||||
|
||||
#ifdef OSD
|
||||
static const char * const lookupTableOsdType[] = {
|
||||
"AUTO",
|
||||
"PAL",
|
||||
"NTSC"
|
||||
};
|
||||
#endif
|
||||
|
||||
static const char * const lookupTableSuperExpoYaw[] = {
|
||||
"OFF", "ON", "ALWAYS"
|
||||
};
|
||||
|
||||
static const char * const lookupTablePwmProtocol[] = {
|
||||
"OFF", "ONESHOT125", "ONESHOT42", "MULTISHOT", "BRUSHED",
|
||||
#ifdef USE_DSHOT
|
||||
"DSHOT150", "DSHOT300", "DSHOT600", "DSHOT1200"
|
||||
#endif
|
||||
};
|
||||
|
||||
static const char * const lookupTableRcInterpolation[] = {
|
||||
"OFF", "PRESET", "AUTO", "MANUAL"
|
||||
};
|
||||
|
||||
static const char * const lookupTableRcInterpolationChannels[] = {
|
||||
"RP", "RPY", "RPYT"
|
||||
};
|
||||
|
||||
static const char * const lookupTableLowpassType[] = {
|
||||
"PT1", "BIQUAD", "FIR"
|
||||
};
|
||||
|
||||
static const char * const lookupTableFailsafe[] = {
|
||||
"AUTO-LAND", "DROP"
|
||||
};
|
||||
|
||||
const lookupTableEntry_t lookupTables[] = {
|
||||
{ lookupTableOffOn, sizeof(lookupTableOffOn) / sizeof(char *) },
|
||||
{ lookupTableUnit, sizeof(lookupTableUnit) / sizeof(char *) },
|
||||
{ lookupTableAlignment, sizeof(lookupTableAlignment) / sizeof(char *) },
|
||||
#ifdef GPS
|
||||
{ lookupTableGPSProvider, sizeof(lookupTableGPSProvider) / sizeof(char *) },
|
||||
{ lookupTableGPSSBASMode, sizeof(lookupTableGPSSBASMode) / sizeof(char *) },
|
||||
#endif
|
||||
#ifdef BLACKBOX
|
||||
{ lookupTableBlackboxDevice, sizeof(lookupTableBlackboxDevice) / sizeof(char *) },
|
||||
#endif
|
||||
{ lookupTableCurrentSensor, sizeof(lookupTableCurrentSensor) / sizeof(char *) },
|
||||
{ lookupTableBatterySensor, sizeof(lookupTableBatterySensor) / sizeof(char *) },
|
||||
#ifdef USE_SERVOS
|
||||
{ lookupTableGimbalMode, sizeof(lookupTableGimbalMode) / sizeof(char *) },
|
||||
#endif
|
||||
#ifdef SERIAL_RX
|
||||
{ lookupTableSerialRX, sizeof(lookupTableSerialRX) / sizeof(char *) },
|
||||
#endif
|
||||
#ifdef USE_RX_SPI
|
||||
{ lookupTableRxSpi, sizeof(lookupTableRxSpi) / sizeof(char *) },
|
||||
#endif
|
||||
{ lookupTableGyroLpf, sizeof(lookupTableGyroLpf) / sizeof(char *) },
|
||||
{ lookupTableAccHardware, sizeof(lookupTableAccHardware) / sizeof(char *) },
|
||||
#ifdef BARO
|
||||
{ lookupTableBaroHardware, sizeof(lookupTableBaroHardware) / sizeof(char *) },
|
||||
#endif
|
||||
#ifdef MAG
|
||||
{ lookupTableMagHardware, sizeof(lookupTableMagHardware) / sizeof(char *) },
|
||||
#endif
|
||||
{ lookupTableDebug, sizeof(lookupTableDebug) / sizeof(char *) },
|
||||
{ lookupTableSuperExpoYaw, sizeof(lookupTableSuperExpoYaw) / sizeof(char *) },
|
||||
{ lookupTablePwmProtocol, sizeof(lookupTablePwmProtocol) / sizeof(char *) },
|
||||
{ lookupTableRcInterpolation, sizeof(lookupTableRcInterpolation) / sizeof(char *) },
|
||||
{ lookupTableRcInterpolationChannels, sizeof(lookupTableRcInterpolationChannels) / sizeof(char *) },
|
||||
{ lookupTableLowpassType, sizeof(lookupTableLowpassType) / sizeof(char *) },
|
||||
{ lookupTableFailsafe, sizeof(lookupTableFailsafe) / sizeof(char *) },
|
||||
{ lookupTableCrashRecovery, sizeof(lookupTableCrashRecovery) / sizeof(char *) },
|
||||
#ifdef OSD
|
||||
{ lookupTableOsdType, sizeof(lookupTableOsdType) / sizeof(char *) },
|
||||
#endif
|
||||
};
|
||||
|
||||
const clivalue_t valueTable[] = {
|
||||
// PG_GYRO_CONFIG
|
||||
{ "align_gyro", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_align) },
|
||||
{ "gyro_lpf", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GYRO_LPF }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_lpf) },
|
||||
{ "gyro_sync_denom", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 32 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_sync_denom) },
|
||||
{ "gyro_lowpass_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_LOWPASS_TYPE }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_lpf_type) },
|
||||
{ "gyro_lowpass", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 255 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_lpf_hz) },
|
||||
{ "gyro_notch1_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_hz_1) },
|
||||
{ "gyro_notch1_cutoff", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_cutoff_1) },
|
||||
{ "gyro_notch2_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_hz_2) },
|
||||
{ "gyro_notch2_cutoff", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_cutoff_2) },
|
||||
{ "moron_threshold", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyroMovementCalibrationThreshold) },
|
||||
#if defined(GYRO_USES_SPI)
|
||||
#if defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU9250) || defined(USE_GYRO_SPI_ICM20689)
|
||||
{ "gyro_use_32khz", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_use_32khz) },
|
||||
#endif
|
||||
#if defined(USE_MPU_DATA_READY_SIGNAL)
|
||||
{ "gyro_isr_update", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_isr_update) },
|
||||
#endif
|
||||
#endif
|
||||
#ifdef USE_DUAL_GYRO
|
||||
{ "gyro_to_use", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 1 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_to_use) },
|
||||
#endif
|
||||
|
||||
// PG_ACCELEROMETER_CONFIG
|
||||
{ "align_acc", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_align) },
|
||||
{ "acc_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ACC_HARDWARE }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_hardware) },
|
||||
{ "acc_lpf_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 400 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_lpf_hz) },
|
||||
{ "acc_trim_pitch", VAR_INT16 | MASTER_VALUE, .config.minmax = { -300, 300 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, accelerometerTrims.values.pitch) },
|
||||
{ "acc_trim_roll", VAR_INT16 | MASTER_VALUE, .config.minmax = { -300, 300 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, accelerometerTrims.values.roll) },
|
||||
|
||||
// PG_COMPASS_CONFIG
|
||||
#ifdef MAG
|
||||
{ "align_mag", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_align) },
|
||||
{ "mag_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_MAG_HARDWARE }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_hardware) },
|
||||
{ "mag_declination", VAR_INT16 | MASTER_VALUE, .config.minmax = { -18000, 18000 }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_declination) },
|
||||
{ "magzero_x", VAR_INT16 | MASTER_VALUE, .config.minmax = { INT16_MIN, INT16_MAX }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, magZero.raw[X]) },
|
||||
{ "magzero_y", VAR_INT16 | MASTER_VALUE, .config.minmax = { INT16_MIN, INT16_MAX }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, magZero.raw[Y]) },
|
||||
{ "magzero_z", VAR_INT16 | MASTER_VALUE, .config.minmax = { INT16_MIN, INT16_MAX }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, magZero.raw[Z]) },
|
||||
#endif
|
||||
|
||||
// PG_BAROMETER_CONFIG
|
||||
#ifdef BARO
|
||||
{ "baro_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BARO_HARDWARE }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_hardware) },
|
||||
{ "baro_tab_size", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, BARO_SAMPLE_COUNT_MAX }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_sample_count) },
|
||||
{ "baro_noise_lpf", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_noise_lpf) },
|
||||
{ "baro_cf_vel", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_cf_vel) },
|
||||
{ "baro_cf_alt", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_cf_alt) },
|
||||
#endif
|
||||
|
||||
// PG_RX_CONFIG
|
||||
{ "mid_rc", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1200, 1700 }, PG_RX_CONFIG, offsetof(rxConfig_t, midrc) },
|
||||
{ "min_check", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, mincheck) },
|
||||
{ "max_check", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, maxcheck) },
|
||||
{ "rssi_channel", VAR_INT8 | MASTER_VALUE, .config.minmax = { 0, MAX_SUPPORTED_RC_CHANNEL_COUNT }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_channel) },
|
||||
{ "rssi_scale", VAR_UINT8 | MASTER_VALUE, .config.minmax = { RSSI_SCALE_MIN, RSSI_SCALE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_scale) },
|
||||
{ "rssi_invert", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_invert) },
|
||||
{ "rc_interp", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_INTERPOLATION }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolation) },
|
||||
{ "rc_interp_ch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_INTERPOLATION_CHANNELS }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolationChannels) },
|
||||
{ "rc_interp_int", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 50 }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolationInterval) },
|
||||
{ "fpv_mix_degrees", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 50 }, PG_RX_CONFIG, offsetof(rxConfig_t, fpvCamAngleDegrees) },
|
||||
{ "max_aux_channels", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, MAX_AUX_CHANNEL_COUNT }, PG_RX_CONFIG, offsetof(rxConfig_t, max_aux_channel) },
|
||||
#ifdef SERIAL_RX
|
||||
{ "serialrx_provider", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_SERIAL_RX }, PG_RX_CONFIG, offsetof(rxConfig_t, serialrx_provider) },
|
||||
{ "sbus_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, sbus_inversion) },
|
||||
#endif
|
||||
#ifdef SPEKTRUM_BIND_PIN
|
||||
{ "spektrum_sat_bind", VAR_UINT8 | MASTER_VALUE, .config.minmax = { SPEKTRUM_SAT_BIND_DISABLED, SPEKTRUM_SAT_BIND_MAX}, PG_RX_CONFIG, offsetof(rxConfig_t, spektrum_sat_bind) },
|
||||
{ "spektrum_sat_bind_autoreset",VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 1 }, PG_RX_CONFIG, offsetof(rxConfig_t, spektrum_sat_bind_autoreset) },
|
||||
#endif
|
||||
{ "airmode_start_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1000, 2000 }, PG_RX_CONFIG, offsetof(rxConfig_t, airModeActivateThreshold) },
|
||||
{ "rx_min_usec", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rx_min_usec) },
|
||||
{ "rx_max_usec", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rx_max_usec) },
|
||||
#ifdef STM32F4
|
||||
{ "serialrx_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, halfDuplex) },
|
||||
#endif
|
||||
|
||||
// PG_PWM_CONFIG
|
||||
#if defined(USE_PWM)
|
||||
{ "input_filtering_mode", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PWM_CONFIG, offsetof(pwmConfig_t, inputFilteringMode) },
|
||||
#endif
|
||||
|
||||
// PG_BLACKBOX_CONFIG
|
||||
#ifdef BLACKBOX
|
||||
{ "blackbox_rate_num", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 32 }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, rate_num) },
|
||||
{ "blackbox_rate_denom", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 32 }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, rate_denom) },
|
||||
{ "blackbox_device", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BLACKBOX_DEVICE }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, device) },
|
||||
{ "blackbox_on_motor_test", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, on_motor_test) },
|
||||
#endif
|
||||
|
||||
// PG_MOTOR_CONFIG
|
||||
{ "min_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, minthrottle) },
|
||||
{ "max_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, maxthrottle) },
|
||||
{ "min_command", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, mincommand) },
|
||||
#ifdef USE_DSHOT
|
||||
{ "digital_idle_value", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, digitalIdleOffsetValue) },
|
||||
#endif
|
||||
{ "use_unsynced_pwm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.useUnsyncedPwm) },
|
||||
{ "motor_pwm_protocol", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_MOTOR_PWM_PROTOCOL }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmProtocol) },
|
||||
{ "motor_pwm_rate", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 200, 32000 }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmRate) },
|
||||
{ "motor_pwm_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmInversion) },
|
||||
|
||||
// PG_THROTTLE_CORRECTION_CONFIG
|
||||
{ "thr_corr_value", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 150 }, PG_THROTTLE_CORRECTION_CONFIG, offsetof(throttleCorrectionConfig_t, throttle_correction_value) },
|
||||
{ "thr_corr_angle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 900 }, PG_THROTTLE_CORRECTION_CONFIG, offsetof(throttleCorrectionConfig_t, throttle_correction_angle) },
|
||||
|
||||
// PG_FAILSAFE_CONFIG
|
||||
{ "failsafe_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_delay) },
|
||||
{ "failsafe_off_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_off_delay) },
|
||||
{ "failsafe_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_MIN, PWM_RANGE_MAX }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_throttle) },
|
||||
{ "failsafe_kill_switch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_kill_switch) },
|
||||
{ "failsafe_throttle_low_delay",VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 300 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_throttle_low_delay) },
|
||||
{ "failsafe_procedure", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_FAILSAFE }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_procedure) },
|
||||
|
||||
// PG_BOARDALIGNMENT_CONFIG
|
||||
{ "align_board_roll", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, rollDegrees) },
|
||||
{ "align_board_pitch", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, pitchDegrees) },
|
||||
{ "align_board_yaw", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, yawDegrees) },
|
||||
|
||||
// PG_GIMBAL_CONFIG
|
||||
#ifdef USE_SERVOS
|
||||
{ "gimbal_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GIMBAL_MODE }, PG_GIMBAL_CONFIG, offsetof(gimbalConfig_t, mode) },
|
||||
#endif
|
||||
|
||||
// PG_BATTERY_CONFIG
|
||||
{ "bat_capacity", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 20000 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, batteryCapacity) },
|
||||
{ "vbat_max_cell_voltage", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 10, 50 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatmaxcellvoltage) },
|
||||
{ "vbat_min_cell_voltage", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 10, 50 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatmincellvoltage) },
|
||||
{ "vbat_warning_cell_voltage", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 10, 50 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatwarningcellvoltage) },
|
||||
{ "vbat_hysteresis", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 250 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbathysteresis) },
|
||||
{ "current_meter", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_CURRENT_METER }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, currentMeterSource) },
|
||||
{ "battery_meter", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_VOLTAGE_METER }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, voltageMeterSource) },
|
||||
{ "bat_detect_thresh", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, batteryNotPresentLevel) },
|
||||
{ "use_vbat_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, useVBatAlerts) },
|
||||
{ "use_cbat_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, useConsumptionAlerts) },
|
||||
{ "cbat_alert_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, consumptionWarningPercentage) },
|
||||
|
||||
// PG_VOLTAGE_SENSOR_ADC_CONFIG
|
||||
{ "vbat_scale", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VBAT_SCALE_MIN, VBAT_SCALE_MAX }, PG_VOLTAGE_SENSOR_ADC_CONFIG, offsetof(voltageSensorADCConfig_t, vbatscale) },
|
||||
|
||||
// PG_CURRENT_SENSOR_ADC_CONFIG
|
||||
{ "ibata_scale", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_ADC_CONFIG, offsetof(currentSensorADCConfig_t, scale) },
|
||||
{ "ibata_offset", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_ADC_CONFIG, offsetof(currentSensorADCConfig_t, offset) },
|
||||
// PG_CURRENT_SENSOR_ADC_CONFIG
|
||||
#ifdef USE_VIRTUAL_CURRENT_METER
|
||||
{ "ibatv_scale", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_VIRTUAL_CONFIG, offsetof(currentSensorVirtualConfig_t, scale) },
|
||||
{ "ibatv_offset", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_VIRTUAL_CONFIG, offsetof(currentSensorVirtualConfig_t, offset) },
|
||||
#endif
|
||||
|
||||
// PG_BEEPER_DEV_CONFIG
|
||||
#ifdef BEEPER
|
||||
{ "beeper_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, isInverted) },
|
||||
{ "beeper_od", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, isOpenDrain) },
|
||||
{ "beeper_frequency", VAR_INT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, frequency) },
|
||||
#endif
|
||||
|
||||
// PG_MIXER_CONFIG
|
||||
{ "yaw_motors_reversed", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MIXER_CONFIG, offsetof(mixerConfig_t, yaw_motors_reversed) },
|
||||
|
||||
// PG_MOTOR_3D_CONFIG
|
||||
{ "3d_deadband_low", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_low) }, // FIXME upper limit should match code in the mixer, 1500 currently
|
||||
{ "3d_deadband_high", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_high) }, // FIXME lower limit should match code in the mixer, 1500 currently,
|
||||
{ "3d_neutral", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, neutral3d) },
|
||||
{ "3d_deadband_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_throttle) },
|
||||
|
||||
// PG_SERVO_CONFIG
|
||||
#ifdef USE_SERVOS
|
||||
{ "servo_center_pulse", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX }, PG_SERVO_CONFIG, offsetof(servoConfig_t, dev.servoCenterPulse) },
|
||||
{ "servo_pwm_rate", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 50, 498 }, PG_SERVO_CONFIG, offsetof(servoConfig_t, dev.servoPwmRate) },
|
||||
{ "servo_lowpass_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 400}, PG_SERVO_CONFIG, offsetof(servoConfig_t, servo_lowpass_freq) },
|
||||
{ "tri_unarmed_servo", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SERVO_CONFIG, offsetof(servoConfig_t, tri_unarmed_servo) },
|
||||
{ "channel_forwarding_start", VAR_UINT8 | MASTER_VALUE, .config.minmax = { AUX1, MAX_SUPPORTED_RC_CHANNEL_COUNT }, PG_SERVO_CONFIG, offsetof(servoConfig_t, channelForwardingStartChannel) },
|
||||
#endif
|
||||
|
||||
// PG_CONTROLRATE_PROFILES
|
||||
{ "rc_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 255 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcRate8) },
|
||||
{ "rc_rate_yaw", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 255 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcYawRate8) },
|
||||
{ "rc_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcExpo8) },
|
||||
{ "rc_yaw_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcYawExpo8) },
|
||||
{ "thr_mid", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, thrMid8) },
|
||||
{ "thr_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, thrExpo8) },
|
||||
{ "roll_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_ROLL_PITCH_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_ROLL]) },
|
||||
{ "pitch_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_ROLL_PITCH_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_PITCH]) },
|
||||
{ "yaw_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_YAW_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_YAW]) },
|
||||
{ "tpa_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_TPA_MAX}, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, dynThrPID) },
|
||||
{ "tpa_breakpoint", VAR_UINT16 | PROFILE_RATE_VALUE, .config.minmax = { PWM_RANGE_MIN, PWM_RANGE_MAX}, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, tpa_breakpoint) },
|
||||
|
||||
// PG_SERIAL_CONFIG
|
||||
{ "reboot_character", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 48, 126 }, PG_SERIAL_CONFIG, offsetof(serialConfig_t, reboot_character) },
|
||||
{ "serial_update_rate_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 100, 2000 }, PG_SERIAL_CONFIG, offsetof(serialConfig_t, serial_update_rate_hz) },
|
||||
|
||||
// PG_IMU_CONFIG
|
||||
{ "accxy_deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_IMU_CONFIG, offsetof(imuConfig_t, accDeadband.xy) },
|
||||
{ "accz_deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_IMU_CONFIG, offsetof(imuConfig_t, accDeadband.z) },
|
||||
{ "acc_unarmedcal", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_IMU_CONFIG, offsetof(imuConfig_t, acc_unarmedcal) },
|
||||
{ "imu_dcm_kp", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 32000 }, PG_IMU_CONFIG, offsetof(imuConfig_t, dcm_kp) },
|
||||
{ "imu_dcm_ki", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 32000 }, PG_IMU_CONFIG, offsetof(imuConfig_t, dcm_ki) },
|
||||
{ "small_angle", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 180 }, PG_IMU_CONFIG, offsetof(imuConfig_t, small_angle) },
|
||||
|
||||
// PG_ARMING_CONFIG
|
||||
{ "auto_disarm_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 60 }, PG_ARMING_CONFIG, offsetof(armingConfig_t, auto_disarm_delay) },
|
||||
{ "disarm_kill_switch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_ARMING_CONFIG, offsetof(armingConfig_t, disarm_kill_switch) },
|
||||
{ "gyro_cal_on_first_arm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_ARMING_CONFIG, offsetof(armingConfig_t, gyro_cal_on_first_arm) },
|
||||
|
||||
|
||||
// PG_GPS_CONFIG
|
||||
#ifdef GPS
|
||||
{ "gps_provider", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GPS_PROVIDER }, PG_GPS_CONFIG, offsetof(gpsConfig_t, provider) },
|
||||
{ "gps_sbas_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GPS_SBAS_MODE }, PG_GPS_CONFIG, offsetof(gpsConfig_t, sbasMode) },
|
||||
{ "gps_auto_config", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, autoConfig) },
|
||||
{ "gps_auto_baud", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, autoBaud) },
|
||||
#endif
|
||||
|
||||
// PG_NAVIGATION_CONFIG
|
||||
#ifdef GPS
|
||||
{ "gps_wp_radius", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_NAVIGATION_CONFIG, offsetof(navigationConfig_t, gps_wp_radius) },
|
||||
{ "nav_controls_heading", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_NAVIGATION_CONFIG, offsetof(navigationConfig_t, nav_controls_heading) },
|
||||
{ "nav_speed_min", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 10, 2000 }, PG_NAVIGATION_CONFIG, offsetof(navigationConfig_t, nav_speed_min) },
|
||||
{ "nav_speed_max", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 10, 2000 }, PG_NAVIGATION_CONFIG, offsetof(navigationConfig_t, nav_speed_max) },
|
||||
{ "nav_slew_rate", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_NAVIGATION_CONFIG, offsetof(navigationConfig_t, nav_slew_rate) },
|
||||
#endif
|
||||
|
||||
// PG_AIRPLANE_CONFIG
|
||||
{ "fixedwing_althold_reversed", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_AIRPLANE_CONFIG, offsetof(airplaneConfig_t, fixedwing_althold_reversed) },
|
||||
|
||||
// PG_RC_CONTROLS_CONFIG
|
||||
{ "alt_hold_deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 250 }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, alt_hold_deadband) },
|
||||
{ "alt_hold_fast_change", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, alt_hold_fast_change) },
|
||||
{ "deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 32 }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, deadband) },
|
||||
{ "yaw_deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, yaw_deadband) },
|
||||
{ "yaw_control_reversed", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, yaw_control_reversed) },
|
||||
|
||||
// PG_PID_CONFIG
|
||||
{ "pid_process_denom", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, MAX_PID_PROCESS_DENOM }, PG_PID_CONFIG, offsetof(pidConfig_t, pid_process_denom) },
|
||||
|
||||
// PG_PID_PROFILE
|
||||
{ "d_lowpass_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_LOWPASS_TYPE }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_filter_type) },
|
||||
{ "d_lowpass", VAR_INT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_lpf_hz) },
|
||||
{ "d_notch_hz", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_notch_hz) },
|
||||
{ "d_notch_cut", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 1, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_notch_cutoff) },
|
||||
{ "vbat_pid_gain", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, vbatPidCompensation) },
|
||||
{ "pid_at_min_throttle", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, pidAtMinThrottle) },
|
||||
{ "anti_gravity_thresh", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 20, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermThrottleThreshold) },
|
||||
{ "anti_gravity_gain", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 1, 30000 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermAcceleratorGain) },
|
||||
{ "setpoint_relax_ratio", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, setpointRelaxRatio) },
|
||||
{ "d_setpoint_weight", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 254 }, PG_PID_PROFILE, offsetof(pidProfile_t, dtermSetpointWeight) },
|
||||
{ "yaw_accel_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 1, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, yawRateAccelLimit) },
|
||||
{ "accel_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 1, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, rateAccelLimit) },
|
||||
{ "crash_dthreshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_dthreshold) },
|
||||
{ "crash_gthreshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_gthreshold) },
|
||||
{ "crash_time", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 5000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_time) },
|
||||
{ "crash_recovery_angle", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 30 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery_angle) },
|
||||
{ "crash_recovery_rate", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 255 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery_rate) },
|
||||
{ "crash_recovery", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_CRASH_RECOVERY }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery) },
|
||||
|
||||
{ "iterm_windup", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 30, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermWindupPointPercent) },
|
||||
{ "yaw_lowpass", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, yaw_lpf_hz) },
|
||||
{ "pidsum_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 100, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, pidSumLimit) },
|
||||
{ "pidsum_limit_yaw", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 100, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, pidSumLimitYaw) },
|
||||
|
||||
{ "p_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PITCH]) },
|
||||
{ "i_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PITCH]) },
|
||||
{ "d_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PITCH]) },
|
||||
{ "p_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[ROLL]) },
|
||||
{ "i_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[ROLL]) },
|
||||
{ "d_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[ROLL]) },
|
||||
{ "p_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[YAW]) },
|
||||
{ "i_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[YAW]) },
|
||||
{ "d_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[YAW]) },
|
||||
|
||||
{ "p_alt", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDALT]) },
|
||||
{ "i_alt", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDALT]) },
|
||||
{ "d_alt", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDALT]) },
|
||||
|
||||
{ "p_level", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDLEVEL]) },
|
||||
{ "i_level", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDLEVEL]) },
|
||||
{ "d_level", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDLEVEL]) },
|
||||
|
||||
{ "p_vel", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDVEL]) },
|
||||
{ "i_vel", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDVEL]) },
|
||||
{ "d_vel", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDVEL]) },
|
||||
|
||||
{ "level_sensitivity", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, levelSensitivity) },
|
||||
{ "level_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 120 }, PG_PID_PROFILE, offsetof(pidProfile_t, levelAngleLimit) },
|
||||
|
||||
{ "horizon_tilt_effect", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 250 }, PG_PID_PROFILE, offsetof(pidProfile_t, horizon_tilt_effect) },
|
||||
{ "horizon_tilt_expert_mode", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, horizon_tilt_expert_mode) },
|
||||
#ifdef GPS
|
||||
{ "gps_pos_p", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDPOS]) },
|
||||
{ "gps_pos_i", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDPOS]) },
|
||||
{ "gps_pos_d", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDPOS]) },
|
||||
{ "gps_posr_p", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDPOSR]) },
|
||||
{ "gps_posr_i", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDPOSR]) },
|
||||
{ "gps_posr_d", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDPOSR]) },
|
||||
{ "gps_nav_p", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, P8[PIDNAVR]) },
|
||||
{ "gps_nav_i", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, I8[PIDNAVR]) },
|
||||
{ "gps_nav_d", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, D8[PIDNAVR]) },
|
||||
#endif
|
||||
|
||||
// PG_TELEMETRY_CONFIG
|
||||
#ifdef TELEMETRY
|
||||
{ "tlm_switch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, telemetry_switch) },
|
||||
{ "tlm_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, telemetry_inversion) },
|
||||
{ "sport_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, sportHalfDuplex) },
|
||||
{ "frsky_default_lat", VAR_INT16 | MASTER_VALUE, .config.minmax = { -9000, 9000 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, gpsNoFixLatitude) },
|
||||
{ "frsky_default_long", VAR_INT16 | MASTER_VALUE, .config.minmax = { -18000, 18000 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, gpsNoFixLongitude) },
|
||||
{ "frsky_gps_format", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, FRSKY_FORMAT_NMEA }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_coordinate_format) },
|
||||
{ "frsky_unit", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_UNIT }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_unit) },
|
||||
{ "frsky_vfas_precision", VAR_UINT8 | MASTER_VALUE, .config.minmax = { FRSKY_VFAS_PRECISION_LOW, FRSKY_VFAS_PRECISION_HIGH }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_vfas_precision) },
|
||||
{ "frsky_vfas_cell_voltage", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_vfas_cell_voltage) },
|
||||
{ "hott_alarm_int", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 120 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, hottAlarmSoundInterval) },
|
||||
{ "pid_in_tlm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = {TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, pidValuesAsTelemetry) },
|
||||
#if defined(TELEMETRY_IBUS)
|
||||
{ "ibus_report_cell_voltage", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, report_cell_voltage) },
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// PG_LED_STRIP_CONFIG
|
||||
#ifdef LED_STRIP
|
||||
{ "ledstrip_visual_beeper", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_LED_STRIP_CONFIG, offsetof(ledStripConfig_t, ledstrip_visual_beeper) },
|
||||
#endif
|
||||
|
||||
// PG_SDCARD_CONFIG
|
||||
#ifdef USE_SDCARD
|
||||
{ "sdcard_dma", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDCARD_CONFIG, offsetof(sdcardConfig_t, useDma) },
|
||||
#endif
|
||||
|
||||
// PG_OSD_CONFIG
|
||||
#ifdef OSD
|
||||
{ "osd_units", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_UNIT }, PG_OSD_CONFIG, offsetof(osdConfig_t, units) },
|
||||
|
||||
{ "osd_rssi_alarm", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_OSD_CONFIG, offsetof(osdConfig_t, rssi_alarm) },
|
||||
{ "osd_cap_alarm", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 20000 }, PG_OSD_CONFIG, offsetof(osdConfig_t, cap_alarm) },
|
||||
{ "osd_time_alarm", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 60 }, PG_OSD_CONFIG, offsetof(osdConfig_t, time_alarm) },
|
||||
{ "osd_alt_alarm", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 10000 }, PG_OSD_CONFIG, offsetof(osdConfig_t, alt_alarm) },
|
||||
|
||||
{ "osd_vbat_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAIN_BATT_VOLTAGE]) },
|
||||
{ "osd_rssi_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_RSSI_VALUE]) },
|
||||
{ "osd_flytimer_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_FLYTIME]) },
|
||||
{ "osd_ontimer_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ONTIME]) },
|
||||
{ "osd_flymode_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_FLYMODE]) },
|
||||
{ "osd_throttle_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_THROTTLE_POS]) },
|
||||
{ "osd_vtx_channel_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_VTX_CHANNEL]) },
|
||||
{ "osd_crosshairs", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CROSSHAIRS]) },
|
||||
{ "osd_horizon_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ARTIFICIAL_HORIZON]) },
|
||||
{ "osd_current_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CURRENT_DRAW]) },
|
||||
{ "osd_mah_drawn_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAH_DRAWN]) },
|
||||
{ "osd_craft_name_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CRAFT_NAME]) },
|
||||
{ "osd_gps_speed_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_SPEED]) },
|
||||
{ "osd_gps_lon", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_LON]) },
|
||||
{ "osd_gps_lat", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_LAT]) },
|
||||
{ "osd_gps_sats_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_SATS]) },
|
||||
{ "osd_altitude_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ALTITUDE]) },
|
||||
{ "osd_pid_roll_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ROLL_PIDS]) },
|
||||
{ "osd_pid_pitch_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_PITCH_PIDS]) },
|
||||
{ "osd_pid_yaw_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_YAW_PIDS]) },
|
||||
{ "osd_debug_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_DEBUG]) },
|
||||
{ "osd_power_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_POWER]) },
|
||||
{ "osd_pidrate_profile_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_PIDRATE_PROFILE]) },
|
||||
{ "osd_battery_warning_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAIN_BATT_WARNING]) },
|
||||
{ "osd_avg_cell_voltage_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_AVG_CELL_VOLTAGE]) },
|
||||
#endif
|
||||
|
||||
// PG_SYSTEM_CONFIG
|
||||
#ifndef SKIP_TASK_STATISTICS
|
||||
{ "task_statistics", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, task_statistics) },
|
||||
#endif
|
||||
{ "debug_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_DEBUG }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, debug_mode) },
|
||||
|
||||
// PG_VTX_CONFIG
|
||||
#ifdef VTX
|
||||
{ "vtx_band", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 5 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_band) },
|
||||
{ "vtx_channel", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 8 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_channel) },
|
||||
{ "vtx_mode", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 2 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_mode) },
|
||||
{ "vtx_mhz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 5600, 5950 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_mhz) },
|
||||
#endif
|
||||
#if defined(USE_RTC6705)
|
||||
{ "vtx_channel", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 39 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_channel) },
|
||||
{ "vtx_power", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 1 }, PG_VTX_CONFIG, offsetof(vtxConfig_t, vtx_power) },
|
||||
#endif
|
||||
|
||||
// PG_VCD_CONFIG
|
||||
#ifdef USE_MAX7456
|
||||
{ "vcd_video_system", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 2 }, PG_VCD_CONFIG, offsetof(vcdProfile_t, video_system) },
|
||||
{ "vcd_h_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -32, 31 }, PG_VCD_CONFIG, offsetof(vcdProfile_t, h_offset) },
|
||||
{ "vcd_v_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -15, 16 }, PG_VCD_CONFIG, offsetof(vcdProfile_t, v_offset) },
|
||||
#endif
|
||||
|
||||
// PG_DISPLAY_PORT_MSP_CONFIG
|
||||
#ifdef USE_MSP_DISPLAYPORT
|
||||
{ "displayport_msp_col_adjust", VAR_INT8 | MASTER_VALUE, .config.minmax = { -6, 0 }, PG_DISPLAY_PORT_MSP_CONFIG, offsetof(displayPortProfile_t, colAdjust) },
|
||||
{ "displayport_msp_row_adjust", VAR_INT8 | MASTER_VALUE, .config.minmax = { -3, 0 }, PG_DISPLAY_PORT_MSP_CONFIG, offsetof(displayPortProfile_t, rowAdjust) },
|
||||
#endif
|
||||
|
||||
// PG_DISPLAY_PORT_MSP_CONFIG
|
||||
#ifdef USE_MAX7456
|
||||
{ "displayport_max7456_col_adjust", VAR_INT8| MASTER_VALUE, .config.minmax = { -6, 0 }, PG_DISPLAY_PORT_MSP_CONFIG, offsetof(displayPortProfile_t, colAdjust) },
|
||||
{ "displayport_max7456_row_adjust", VAR_INT8| MASTER_VALUE, .config.minmax = { -3, 0 }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, rowAdjust) },
|
||||
#endif
|
||||
};
|
||||
|
||||
const uint16_t valueTableEntryCount = ARRAYLEN(valueTable);
|
||||
|
||||
void settingsBuildCheck() {
|
||||
BUILD_BUG_ON(LOOKUP_TABLE_COUNT != ARRAYLEN(lookupTables));
|
||||
}
|
||||
|
|
@ -0,0 +1,142 @@
|
|||
/*
|
||||
* This file is part of Cleanflight.
|
||||
*
|
||||
* Cleanflight is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cleanflight is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
typedef enum {
|
||||
TABLE_OFF_ON = 0,
|
||||
TABLE_UNIT,
|
||||
TABLE_ALIGNMENT,
|
||||
#ifdef GPS
|
||||
TABLE_GPS_PROVIDER,
|
||||
TABLE_GPS_SBAS_MODE,
|
||||
#endif
|
||||
#ifdef BLACKBOX
|
||||
TABLE_BLACKBOX_DEVICE,
|
||||
#endif
|
||||
TABLE_CURRENT_METER,
|
||||
TABLE_VOLTAGE_METER,
|
||||
#ifdef USE_SERVOS
|
||||
TABLE_GIMBAL_MODE,
|
||||
#endif
|
||||
#ifdef SERIAL_RX
|
||||
TABLE_SERIAL_RX,
|
||||
#endif
|
||||
#ifdef USE_RX_SPI
|
||||
TABLE_RX_SPI,
|
||||
#endif
|
||||
TABLE_GYRO_LPF,
|
||||
TABLE_ACC_HARDWARE,
|
||||
#ifdef BARO
|
||||
TABLE_BARO_HARDWARE,
|
||||
#endif
|
||||
#ifdef MAG
|
||||
TABLE_MAG_HARDWARE,
|
||||
#endif
|
||||
TABLE_DEBUG,
|
||||
TABLE_SUPEREXPO_YAW,
|
||||
TABLE_MOTOR_PWM_PROTOCOL,
|
||||
TABLE_RC_INTERPOLATION,
|
||||
TABLE_RC_INTERPOLATION_CHANNELS,
|
||||
TABLE_LOWPASS_TYPE,
|
||||
TABLE_FAILSAFE,
|
||||
TABLE_CRASH_RECOVERY,
|
||||
#ifdef OSD
|
||||
TABLE_OSD,
|
||||
#endif
|
||||
LOOKUP_TABLE_COUNT
|
||||
} lookupTableIndex_e;
|
||||
|
||||
typedef struct lookupTableEntry_s {
|
||||
const char * const *values;
|
||||
const uint8_t valueCount;
|
||||
} lookupTableEntry_t;
|
||||
|
||||
|
||||
#define VALUE_TYPE_OFFSET 0
|
||||
#define VALUE_SECTION_OFFSET 4
|
||||
#define VALUE_MODE_OFFSET 6
|
||||
|
||||
typedef enum {
|
||||
// value type, bits 0-3
|
||||
VAR_UINT8 = (0 << VALUE_TYPE_OFFSET),
|
||||
VAR_INT8 = (1 << VALUE_TYPE_OFFSET),
|
||||
VAR_UINT16 = (2 << VALUE_TYPE_OFFSET),
|
||||
VAR_INT16 = (3 << VALUE_TYPE_OFFSET),
|
||||
|
||||
// value section, bits 4-5
|
||||
MASTER_VALUE = (0 << VALUE_SECTION_OFFSET),
|
||||
PROFILE_VALUE = (1 << VALUE_SECTION_OFFSET),
|
||||
PROFILE_RATE_VALUE = (2 << VALUE_SECTION_OFFSET), // 0x20
|
||||
// value mode
|
||||
MODE_DIRECT = (0 << VALUE_MODE_OFFSET), // 0x40
|
||||
MODE_LOOKUP = (1 << VALUE_MODE_OFFSET) // 0x80
|
||||
} cliValueFlag_e;
|
||||
|
||||
#define VALUE_TYPE_MASK (0x0F)
|
||||
#define VALUE_SECTION_MASK (0x30)
|
||||
#define VALUE_MODE_MASK (0xC0)
|
||||
|
||||
typedef union {
|
||||
int8_t int8;
|
||||
uint8_t uint8;
|
||||
int16_t int16;
|
||||
uint16_t uint16;
|
||||
} cliVar_t;
|
||||
|
||||
typedef struct cliMinMaxConfig_s {
|
||||
const int16_t min;
|
||||
const int16_t max;
|
||||
} cliMinMaxConfig_t;
|
||||
|
||||
typedef struct cliLookupTableConfig_s {
|
||||
const lookupTableIndex_e tableIndex;
|
||||
} cliLookupTableConfig_t;
|
||||
|
||||
typedef union {
|
||||
cliLookupTableConfig_t lookup;
|
||||
cliMinMaxConfig_t minmax;
|
||||
} cliValueConfig_t;
|
||||
|
||||
typedef struct {
|
||||
const char *name;
|
||||
const uint8_t type; // see cliValueFlag_e
|
||||
const cliValueConfig_t config;
|
||||
|
||||
pgn_t pgn;
|
||||
uint16_t offset;
|
||||
} __attribute__((packed)) clivalue_t;
|
||||
|
||||
|
||||
extern const lookupTableEntry_t lookupTables[];
|
||||
extern const uint16_t valueTableEntryCount;
|
||||
|
||||
extern const clivalue_t valueTable[];
|
||||
//extern const uint8_t lookupTablesEntryCount;
|
||||
|
||||
extern const char * const lookupTableAccHardware[];
|
||||
//extern const uint8_t lookupTableAccHardwareEntryCount;
|
||||
|
||||
extern const char * const lookupTableBaroHardware[];
|
||||
//extern const uint8_t lookupTableBaroHardwareEntryCount;
|
||||
|
||||
extern const char * const lookupTableMagHardware[];
|
||||
//extern const uint8_t lookupTableMagHardwareEntryCount;
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue