© Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+#ifndef USBD_DEBUG_LEVEL
+#define USBD_DEBUG_LEVEL 0U
+#endif /* USBD_DEBUG_LEVEL */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay(uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
new file mode 100755
index 000000000..047fe2efe
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
@@ -0,0 +1,105 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h
new file mode 100755
index 000000000..a805e8b71
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h
@@ -0,0 +1,348 @@
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0U
+#endif /* NULL */
+
+#ifndef USBD_MAX_NUM_INTERFACES
+#define USBD_MAX_NUM_INTERFACES 1U
+#endif /* USBD_MAX_NUM_CONFIGURATION */
+
+#ifndef USBD_MAX_NUM_CONFIGURATION
+#define USBD_MAX_NUM_CONFIGURATION 1U
+#endif /* USBD_MAX_NUM_CONFIGURATION */
+
+#ifndef USBD_LPM_ENABLED
+#define USBD_LPM_ENABLED 0U
+#endif /* USBD_LPM_ENABLED */
+
+#ifndef USBD_SELF_POWERED
+#define USBD_SELF_POWERED 1U
+#endif /*USBD_SELF_POWERED */
+
+#ifndef USBD_SUPPORT_USER_STRING_DESC
+#define USBD_SUPPORT_USER_STRING_DESC 0U
+#endif /* USBD_SUPPORT_USER_STRING_DESC */
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0AU
+#define USB_LEN_DEV_DESC 0x12U
+#define USB_LEN_CFG_DESC 0x09U
+#define USB_LEN_IF_DESC 0x09U
+#define USB_LEN_EP_DESC 0x07U
+#define USB_LEN_OTG_DESC 0x03U
+#define USB_LEN_LANGID_STR_DESC 0x04U
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09U
+
+#define USBD_IDX_LANGID_STR 0x00U
+#define USBD_IDX_MFC_STR 0x01U
+#define USBD_IDX_PRODUCT_STR 0x02U
+#define USBD_IDX_SERIAL_STR 0x03U
+#define USBD_IDX_CONFIG_STR 0x04U
+#define USBD_IDX_INTERFACE_STR 0x05U
+
+#define USB_REQ_TYPE_STANDARD 0x00U
+#define USB_REQ_TYPE_CLASS 0x20U
+#define USB_REQ_TYPE_VENDOR 0x40U
+#define USB_REQ_TYPE_MASK 0x60U
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00U
+#define USB_REQ_RECIPIENT_INTERFACE 0x01U
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02U
+#define USB_REQ_RECIPIENT_MASK 0x03U
+
+#define USB_REQ_GET_STATUS 0x00U
+#define USB_REQ_CLEAR_FEATURE 0x01U
+#define USB_REQ_SET_FEATURE 0x03U
+#define USB_REQ_SET_ADDRESS 0x05U
+#define USB_REQ_GET_DESCRIPTOR 0x06U
+#define USB_REQ_SET_DESCRIPTOR 0x07U
+#define USB_REQ_GET_CONFIGURATION 0x08U
+#define USB_REQ_SET_CONFIGURATION 0x09U
+#define USB_REQ_GET_INTERFACE 0x0AU
+#define USB_REQ_SET_INTERFACE 0x0BU
+#define USB_REQ_SYNCH_FRAME 0x0CU
+
+#define USB_DESC_TYPE_DEVICE 0x01U
+#define USB_DESC_TYPE_CONFIGURATION 0x02U
+#define USB_DESC_TYPE_STRING 0x03U
+#define USB_DESC_TYPE_INTERFACE 0x04U
+#define USB_DESC_TYPE_ENDPOINT 0x05U
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U
+#define USB_DESC_TYPE_BOS 0x0FU
+
+#define USB_CONFIG_REMOTE_WAKEUP 0x02U
+#define USB_CONFIG_SELF_POWERED 0x01U
+
+#define USB_FEATURE_EP_HALT 0x00U
+#define USB_FEATURE_REMOTE_WAKEUP 0x01U
+#define USB_FEATURE_TEST_MODE 0x02U
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10U
+
+#define USB_HS_MAX_PACKET_SIZE 512U
+#define USB_FS_MAX_PACKET_SIZE 64U
+#define USB_MAX_EP0_SIZE 64U
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 0x01U
+#define USBD_STATE_ADDRESSED 0x02U
+#define USBD_STATE_CONFIGURED 0x03U
+#define USBD_STATE_SUSPENDED 0x04U
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0x00U
+#define USBD_EP0_SETUP 0x01U
+#define USBD_EP0_DATA_IN 0x02U
+#define USBD_EP0_DATA_OUT 0x03U
+#define USBD_EP0_STATUS_IN 0x04U
+#define USBD_EP0_STATUS_OUT 0x05U
+#define USBD_EP0_STALL 0x06U
+
+#define USBD_EP_TYPE_CTRL 0x00U
+#define USBD_EP_TYPE_ISOC 0x01U
+#define USBD_EP_TYPE_BULK 0x02U
+#define USBD_EP_TYPE_INTR 0x03U
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+} USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+ uint8_t (*DeInit)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup)(struct _USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent)(struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*EP0_RxReady)(struct _USBD_HandleTypeDef *pdev);
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
+ uint8_t (*DataOut)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
+ uint8_t (*SOF)(struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING_DESC == 1U)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0U,
+ USBD_SPEED_FULL = 1U,
+ USBD_SPEED_LOW = 2U,
+} USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum
+{
+ USBD_OK = 0U,
+ USBD_BUSY,
+ USBD_FAIL,
+} USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+#if (USBD_LPM_ENABLED == 1U)
+ uint8_t *(*GetBOSDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t is_used;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[16];
+ USBD_EndpointTypeDef ep_out[16];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U))
+
+#define LOBYTE(x) ((uint8_t)((x) & 0x00FFU))
+#define HIBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+#ifndef __weak
+#define __weak __attribute__((weak))
+#endif /* __weak */
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __ALIGN_END
+#define __ALIGN_END __attribute__ ((aligned (4U)))
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif /* __ALIGN_BEGIN */
+#else
+#ifndef __ALIGN_END
+#define __ALIGN_END
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#if defined (__CC_ARM) /* ARM Compiler */
+#define __ALIGN_BEGIN __align(4U)
+#elif defined (__ICCARM__) /* IAR Compiler */
+#define __ALIGN_BEGIN
+#endif /* __CC_ARM */
+#endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_desc_template.h b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_desc_template.h
new file mode 100755
index 000000000..35a5e6373
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_desc_template.h
@@ -0,0 +1,41 @@
+/**
+ ******************************************************************************
+ * @file usbd_desc_template.h
+ * @author MCD Application Team
+ * @brief Header for usbd_desc_template.c module
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC_TEMPLATE_H
+#define __USBD_DESC_TEMPLATE_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#define DEVICE_ID1 (0x1FFF7A10)
+#define DEVICE_ID2 (0x1FFF7A14)
+#define DEVICE_ID3 (0x1FFF7A18)
+
+#define USB_SIZ_STRING_SERIAL 0x1A
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+extern USBD_DescriptorsTypeDef XXX_Desc; /* Replace 'XXX_Desc' with your active USB device class, ex: HID_Desc */
+
+#endif /* __USBD_DESC_TEMPLATE_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
new file mode 100755
index 000000000..629369eab
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev);
+
+uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c
new file mode 100755
index 000000000..dbc75d89f
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c
@@ -0,0 +1,201 @@
+/**
+ ******************************************************************************
+ * @file usbd_conf_template.c
+ * @author MCD Application Team
+ * @brief USB Device configuration and interface file
+ * This template should be copied to the user folder,
+ * renamed and customized following user needs.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Starts the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Stops the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Opens an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param ep_type: Endpoint Type
+ * @param ep_mps: Endpoint Max Packet Size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr,
+ uint8_t ep_type, uint16_t ep_mps)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Closes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0;
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev,
+ uint8_t dev_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr,
+ uint8_t *pbuf, uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr, uint8_t *pbuf,
+ uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns the last transferred packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0U;
+}
+
+/**
+ * @brief Delays routine for the USB Device Library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c
new file mode 100755
index 000000000..ca8797777
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c
@@ -0,0 +1,611 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev,
+ USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if (pdev == NULL)
+ {
+#if (USBD_DEBUG_LEVEL > 1U)
+ USBD_ErrLog("Invalid Device handle");
+#endif
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if (pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if (pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if (pclass != NULL)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+#if (USBD_DEBUG_LEVEL > 1U)
+ USBD_ErrLog("Invalid Class handle");
+#endif
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev)
+{
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev)
+{
+ /* Prevent unused argument compilation warning */
+ UNUSED(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if (pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if (pdev->pClass->Init(pdev, cfgidx) == 0U)
+ {
+ ret = USBD_OK;
+ }
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1FU)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U));
+ break;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev,
+ uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if (epnum == 0U)
+ {
+ pep = &pdev->ep_out[0];
+
+ if (pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if (pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx(pdev, pdata,
+ (uint16_t)MIN(pep->rem_length, pep->maxpacket));
+ }
+ else
+ {
+ if ((pdev->pClass->EP0_RxReady != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ if (pdev->ep0_state == USBD_EP0_STATUS_OUT)
+ {
+ /*
+ * STATUS PHASE completed, update ep0_state to idle
+ */
+ pdev->ep0_state = USBD_EP0_IDLE;
+ USBD_LL_StallEP(pdev, 0U);
+ }
+ }
+ }
+ else if ((pdev->pClass->DataOut != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ else
+ {
+ /* should never be in this condition */
+ return USBD_FAIL;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev,
+ uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if (epnum == 0U)
+ {
+ pep = &pdev->ep_in[0];
+
+ if (pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if (pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData(pdev, pdata, (uint16_t)pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
+ }
+ else
+ {
+ /* last packet is MPS multiple, so send ZLP packet */
+ if ((pep->total_length % pep->maxpacket == 0U) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len))
+ {
+ USBD_CtlContinueSendData(pdev, NULL, 0U);
+ pdev->ep0_data_len = 0U;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
+ }
+ else
+ {
+ if ((pdev->pClass->EP0_TxSent != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_LL_StallEP(pdev, 0x80U);
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ else
+ {
+ if ((pdev->ep0_state == USBD_EP0_STATUS_IN) ||
+ (pdev->ep0_state == USBD_EP0_IDLE))
+ {
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ }
+
+ if (pdev->dev_test_mode == 1U)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0U;
+ }
+ }
+ else if ((pdev->pClass->DataIn != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ else
+ {
+ /* should never be in this condition */
+ return USBD_FAIL;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
+ pdev->ep_out[0x00U & 0xFU].is_used = 1U;
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
+ pdev->ep_in[0x80U & 0xFU].is_used = 1U;
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->ep0_state = USBD_EP0_IDLE;
+ pdev->dev_config = 0U;
+ pdev->dev_remote_wakeup = 0U;
+
+ if (pdev->pClassData)
+ {
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev,
+ USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ if (pdev->dev_state == USBD_STATE_SUSPENDED)
+ {
+ pdev->dev_state = pdev->dev_old_state;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if (pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+ /* Prevent unused arguments compilation warning */
+ UNUSED(pdev);
+ UNUSED(epnum);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+ /* Prevent unused arguments compilation warning */
+ UNUSED(pdev);
+ UNUSED(epnum);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ /* Prevent unused argument compilation warning */
+ UNUSED(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
new file mode 100755
index 000000000..4561c8d67
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
@@ -0,0 +1,918 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ pdev->pClass->Setup(pdev, req);
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+ USBD_GetDescriptor(pdev, req);
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig(pdev, req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig(pdev, req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus(pdev, req);
+ break;
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature(pdev, req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature(pdev, req);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ case USB_REQ_TYPE_STANDARD:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req);
+
+ if ((req->wLength == 0U) && (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_EndpointTypeDef *pep;
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ ep_addr = LOBYTE(req->wIndex);
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ pdev->pClass->Setup(pdev, req);
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60U) == 0x20U)
+ {
+ ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req);
+
+ return ret;
+ }
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_SET_FEATURE:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00U) &&
+ (ep_addr != 0x80U) && (req->wLength == 0x00U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ }
+ }
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7FU) != 0x00U)
+ {
+ USBD_LL_ClearStallEP(pdev, ep_addr);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \
+ &pdev->ep_out[ep_addr & 0x7FU];
+
+ pep->status = 0x0000U;
+
+ USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ }
+ else
+ {
+ if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ }
+
+ pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \
+ &pdev->ep_out[ep_addr & 0x7FU];
+
+ if ((ep_addr == 0x00U) || (ep_addr == 0x80U))
+ {
+ pep->status = 0x0000U;
+ }
+ else if (USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001U;
+ }
+ else
+ {
+ pep->status = 0x0000U;
+ }
+
+ USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return ret;
+}
+
+
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len = 0U;
+ uint8_t *pbuf = NULL;
+ uint8_t err = 0U;
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1U)
+ case USB_DESC_TYPE_BOS:
+ if (pdev->pDesc->GetBOSDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if (pdev->dev_speed == USBD_SPEED_HIGH)
+ {
+ pbuf = pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ if (pdev->pDesc->GetLangIDStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USBD_IDX_MFC_STR:
+ if (pdev->pDesc->GetManufacturerStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ if (pdev->pDesc->GetProductStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ if (pdev->pDesc->GetSerialStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ if (pdev->pDesc->GetConfigurationStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ if (pdev->pDesc->GetInterfaceStrDescriptor != NULL)
+ {
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING_DESC == 1U)
+ if (pdev->pClass->GetUsrStrDescriptor != NULL)
+ {
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue), &len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+#else
+ USBD_CtlError(pdev, req);
+ err++;
+#endif
+ }
+ break;
+
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+ if (pdev->dev_speed == USBD_SPEED_HIGH)
+ {
+ pbuf = pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if (pdev->dev_speed == USBD_SPEED_HIGH)
+ {
+ pbuf = pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ err++;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ err++;
+ break;
+ }
+
+ if (err != 0U)
+ {
+ return;
+ }
+ else
+ {
+ if ((len != 0U) && (req->wLength != 0U))
+ {
+ len = MIN(len, req->wLength);
+ (void)USBD_CtlSendData(pdev, pbuf, len);
+ }
+
+ if (req->wLength == 0U)
+ {
+ (void)USBD_CtlSendStatus(pdev);
+ }
+ }
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7FU;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev, req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0U)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION)
+ {
+ USBD_CtlError(pdev, req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev, req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0U)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev, cfgidx);
+ USBD_CtlSendStatus(pdev);
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev, req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ USBD_ClrClassConfig(pdev, cfgidx);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ if (req->wLength != 1U)
+ {
+ USBD_CtlError(pdev, req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0U;
+ USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_default_config, 1U);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config, 1U);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wLength != 0x2U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+#if (USBD_SELF_POWERED == 1U)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0U;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config_status, 2U);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1U;
+ USBD_CtlSendStatus(pdev);
+ }
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0U;
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *)(pdata);
+ req->bRequest = *(uint8_t *)(pdata + 1U);
+ req->wValue = SWAPBYTE(pdata + 2U);
+ req->wIndex = SWAPBYTE(pdata + 4U);
+ req->wLength = SWAPBYTE(pdata + 6U);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError(USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev, 0x80U);
+ USBD_LL_StallEP(pdev, 0U);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0U;
+
+ if (desc != NULL)
+ {
+ *len = (uint16_t)USBD_GetLen(desc) * 2U + 2U;
+ unicode[idx++] = *(uint8_t *)(void *)len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0U;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0U;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
new file mode 100755
index 000000000..7e969de64
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
@@ -0,0 +1,216 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf, uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+
+ /* Start the transfer */
+ USBD_LL_Transmit(pdev, 0x00U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf, uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit(pdev, 0x00U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf, uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive(pdev, 0U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf, uint16_t len)
+{
+ USBD_LL_PrepareReceive(pdev, 0U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit(pdev, 0x00U, NULL, 0U);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Release_Notes.html b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Release_Notes.html
new file mode 100755
index 000000000..a7462bc88
--- /dev/null
+++ b/lib/main/STM32H7/Middlewares/ST/STM32_USB_Device_Library/Release_Notes.html
@@ -0,0 +1,1397 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
\ No newline at end of file
+
+
+
+
+
+
+
+
+
|
+
