Put CLI help entries into alphabetical order.

src/main/fc/serial_cli.c

@@ -3703,9 +3703,12 @@ static void cliHelp(char *cmdline);
 const clicmd_t cmdTable[] = {
     CLI_COMMAND_DEF("adjrange", "configure adjustment ranges", NULL, cliAdjustmentRange),
     CLI_COMMAND_DEF("aux", "configure modes", NULL, cliAux),
+#ifdef BEEPER
+    CLI_COMMAND_DEF("beeper", "turn on/off beeper", "list\r\n"
+        "\t<+|->[name]", cliBeeper),
+#endif
 #ifdef LED_STRIP
     CLI_COMMAND_DEF("color", "configure colors", NULL, cliColor),
-    CLI_COMMAND_DEF("mode_color", "configure mode and special colors", NULL, cliModeColor),
 #endif
     CLI_COMMAND_DEF("defaults", "reset to defaults and reboot", NULL, cliDefaults),
     CLI_COMMAND_DEF("dfu", "DFU mode on reboot", NULL, cliDfu),
@@ -3713,6 +3716,9 @@ const clicmd_t cmdTable[] = {
         "[master|profile|rates|all] {showdefaults}", cliDiff),
     CLI_COMMAND_DEF("dump", "dump configuration",
         "[master|profile|rates|all] {showdefaults}", cliDump),
+#ifdef USE_ESCSERIAL
+    CLI_COMMAND_DEF("escprog", "passthrough esc to serial", "<mode [sk/bl/ki/cc]> <index>", cliEscPassthrough),
+#endif
     CLI_COMMAND_DEF("exit", NULL, NULL, cliExit),
     CLI_COMMAND_DEF("feature", "configure features",
         "list\r\n"
@@ -3725,13 +3731,9 @@ const clicmd_t cmdTable[] = {
     CLI_COMMAND_DEF("flash_write", NULL, "<address> <message>", cliFlashWrite),
 #endif
 #endif
-    CLI_COMMAND_DEF("get", "get variable value",
-            "[name]", cliGet),
+    CLI_COMMAND_DEF("get", "get variable value", "[name]", cliGet),
 #ifdef GPS
     CLI_COMMAND_DEF("gpspassthrough", "passthrough gps to serial", NULL, cliGpsPassthrough),
-#endif
-#ifdef USE_ESCSERIAL
-    CLI_COMMAND_DEF("escprog", "passthrough esc to serial", "<mode [sk/bl/ki/cc]> <index>", cliEscPassthrough),
 #endif
     CLI_COMMAND_DEF("help", NULL, NULL, cliHelp),
 #ifdef LED_STRIP
@@ -3740,16 +3742,19 @@ const clicmd_t cmdTable[] = {
     CLI_COMMAND_DEF("map", "configure rc channel order",
         "[<map>]", cliMap),
 #ifndef USE_QUAD_MIXER_ONLY
-    CLI_COMMAND_DEF("mixer", "configure mixer",
-        "list\r\n"
+    CLI_COMMAND_DEF("mixer", "configure mixer", "list\r\n"
         "\t<name>", cliMixer),
 #endif
     CLI_COMMAND_DEF("mmix", "custom motor mixer", NULL, cliMotorMix),
+#ifdef LED_STRIP
+    CLI_COMMAND_DEF("mode_color", "configure mode and special colors", NULL, cliModeColor),
+#endif
     CLI_COMMAND_DEF("motor",  "get/set motor",
        "<index> [<value>]", cliMotor),
+    CLI_COMMAND_DEF("name", "name of craft", NULL, cliName),
 #if (FLASH_SIZE > 128)
     CLI_COMMAND_DEF("play_sound", NULL,
-        "[<index>]\r\n", cliPlaySound),
+        "[<index>]", cliPlaySound),
 #endif
     CLI_COMMAND_DEF("profile", "change profile",
         "[<index>]", cliProfile),
@@ -3757,43 +3762,34 @@ const clicmd_t cmdTable[] = {
 #if (FLASH_SIZE > 64)
     CLI_COMMAND_DEF("resource", "view currently used resources", NULL, cliResource),
 #endif
-    CLI_COMMAND_DEF("rxrange", "configure rx channel ranges", NULL, cliRxRange),
     CLI_COMMAND_DEF("rxfail", "show/set rx failsafe settings", NULL, cliRxFail),
+    CLI_COMMAND_DEF("rxrange", "configure rx channel ranges", NULL, cliRxRange),
     CLI_COMMAND_DEF("save", "save and reboot", NULL, cliSave),
+#ifdef USE_SDCARD
+    CLI_COMMAND_DEF("sd_info", "sdcard info", NULL, cliSdInfo),
+#endif
     CLI_COMMAND_DEF("serial", "configure serial ports", NULL, cliSerial),
 #ifndef SKIP_SERIAL_PASSTHROUGH
-    CLI_COMMAND_DEF("serialpassthrough", "passthrough serial data to port",
-                    "<id> [baud] [mode] : passthrough to serial",
-                    cliSerialPassthrough),
+    CLI_COMMAND_DEF("serialpassthrough", "passthrough serial data to port", "<id> [baud] [mode] : passthrough to serial", cliSerialPassthrough),
 #endif
 #ifdef USE_SERVOS
     CLI_COMMAND_DEF("servo", "configure servos", NULL, cliServo),
 #endif
-    CLI_COMMAND_DEF("set", "change setting",
-        "[<name>=<value>]", cliSet),
+    CLI_COMMAND_DEF("set", "change setting", "[<name>=<value>]", cliSet),
 #ifdef USE_SERVOS
-    CLI_COMMAND_DEF("smix", "servo mixer",
-        "<rule> <servo> <source> <rate> <speed> <min> <max> <box>\r\n"
+    CLI_COMMAND_DEF("smix", "servo mixer", "<rule> <servo> <source> <rate> <speed> <min> <max> <box>\r\n"
         "\treset\r\n"
         "\tload <mixer>\r\n"
         "\treverse <servo> <source> r|n", cliServoMix),
-#endif
-#ifdef USE_SDCARD
-    CLI_COMMAND_DEF("sd_info", "sdcard info", NULL, cliSdInfo),
 #endif
     CLI_COMMAND_DEF("status", "show status", NULL, cliStatus),
 #ifndef SKIP_TASK_STATISTICS
     CLI_COMMAND_DEF("tasks", "show task stats", NULL, cliTasks),
 #endif
     CLI_COMMAND_DEF("version", "show version", NULL, cliVersion),
-#ifdef BEEPER
-    CLI_COMMAND_DEF("beeper", "turn on/off beeper", "list\r\n"
-            "\t<+|->[name]", cliBeeper),
-#endif
 #ifdef VTX
     CLI_COMMAND_DEF("vtx", "vtx channels on switch", NULL, cliVtx),
 #endif
-    CLI_COMMAND_DEF("name", "Name of craft", NULL, cliName),
 };
 #define CMD_COUNT (sizeof(cmdTable) / sizeof(clicmd_t))